• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.1-8
• /
• 2006

Network measurement is a vital part of network traffic engineering. In a network, the metric 'capacity' characterizes the maximum throughput the path can provide when there is no traffic load, or the minimum transmission rate among all links in a path. Pathrate is one of the most widely used network capacity measurement tools nowadays. It's famous for its accurate estimation result and non restriction of the temporal network traffic condition. After several years of development, its performance becomes more stable and reliable. Extant local modes detection algorithm in pathrate is based on statistic methodology histogram. This paper suggests a new algorithm for local modes detection based on ASH (Averaged Shifted Histogram). We have implemented this algorithm and will prove it can accomplish the same task as the original one with a better result.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.1-10
• /
• 1999

A low power concumption 2.4 GHz one-chip transceiver MMIC was designed and fabricated using $1.0\mu\textrm{m}$ ion-implantation MESFET process and packaged on a 24 lead SSOP. In the transmitter mode, it revealed conversion gain of 7.5 dB, output IP3 of -3.5 dBm, and noise figure of 3.9 dB at 2.44 GHz with 3.9 mA current consumption. In the receiver mode, it revealed voltage sensitivity of 6.5 mV/$\mu\$W with 2 .0 mA current consumption. Comparing the fabricated MMIC with the results of MMICs reported elsewhere, it was shown that the fabricated MMIC had good performance. The low power consumption 2.4 GHz transceiver MMIC is expected to be used for various applications such as wireless local area networks, wireless local loops and RFID tags in ISM-band.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.551-562
• /
• 1998

Amultiresolution filtering algorithm based on the physical SPECT lesion detachability provides and optimal solution for SPECT reconstruction problem. Related to the previous study, we estimated the SPECT lesion detection capability by m minimum detectable lesion sizes (MDLSs), and generated m reconstruction filters which are designed to maximize the smoothing effect at a fixed MDLS-dependent resolution level $\frac{MDLS}{4\sqrt{2In2}}$. The proposed multiresolution filtering algorithm used a coarse-to-fine approach for the m-level resolution filter images obtained from these m filters for a given projection image. First, the local homogeneity is determined for every pixel of the filter images, by comparing the local variance value computed in a window centered at the pixel and the mode determined from the distribution of the local variances. Based on the local homogeneity, the pixels declared as homogeneous are chosen from the filter image of the lowest resolution, and for the other pixels the same process is repeated for the higher resolution filter images. For the non-homogeneous pixels after this pixels after this repetition process ends, the pixel values of the highest resolution filter image are substituted. From the results of the simulated experiments, the proposed multiresolution filtering algorithm showed a strong smoothing effect in the homogeneous regions and a significant resolution improvement near the edge regions of the projection images, and so produced good adaptability effects in the reconstructed images.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.51-58
• /
• 1991

In this paper, we propose a multiresolution edge detection method which selects the edge detection window size and scale automatically by using the local variance information as an edgeness measure of a region. The mode of the local variance distribution which is calculated over the (2p + 1) x (2p + 1) windows is used to determine the resolution of the given pixel and the edge operator with different scale can be applied to the pixel depending on its resolution. The combination of the resolution determination scheme with the conventional Canny and LOG edge detectors gives the proposed multiresolution edge detection schemes. The effectness of the proposed schemes is shown via computer simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.87-97
• /
• 2015

An Aerial video summarization is not only the key to effective browsing video within a limited time, but also an embedded cue to efficiently congregative situation awareness acquired by unmanned aerial vehicle. Different with previous works, we utilize sensor operation mode of unmanned aerial vehicle, which is global, local, and focused surveillance mode in order for accurately summarizing the aerial video considering flight and surveillance/reconnaissance environments. In focused mode, we propose the moving-react tracking method which utilizes the partitioning motion vector and spatiotemporal saliency map to detect and track the interest moving object continuously. In our simulation result, the key frames are correctly detected for aerial video summarization according to the sensor operation mode of aerial vehicle and finally, we verify the efficiency of video summarization using the proposed mothed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.167-176
• /
• 1999

This paper is concerned with the damage detection of existing 2 and 3-dimensional truss structures based on free vibration equation and extended Kalman filter. The local damage is characterized in terms of the stiffness degradation of damaged members. As the observed data, the natural frequencies and mode shapes of damaged truss structure model are adopted. Both location and stiffness of damaged parts of members in truss structures can be estimated by the proposed inverse solution procedure. The applicability and effectiveness of proposed inverse solution procedure are demonstrated through the numerical examples.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.275-285
• /
• 1997

We have investigated Pi 2 pulsations which were observed both on ground magnetometer array and by satellites. On November 9th in 1994, Pi 2 pulsations appeared globally on the 190/210 magnetometer chain and Hermanus station when two satellites(EXOS-D and ETS-VI) were located near the magnetic meridian of the 210 array. The local time of measurements covers from morning(LT=8.47hr) to afternoon(LT=20.3hr) and the bandwidth of peak frequency is found relatively small. The signals of the electric field are highly coherent with ground-based observations with the out of phase oscillations. However, the magnetic field measurement on the ETS-VI in the outer magnetosphere(L=6.60) shows no signature of Pi 2 pulsations over the same time interval and the correlation with any of the ground-based stations is found to be very weak, even through both satellites and magnetometer chain are located close to each other in local time. We suggest that this event may be a direct evidence of Pi 2 pulsations as virtual resonant modes which are localized in the plasmasphere(Lee 1996). The results show that the cavity mode oscillations can occur in the inner magnetosphere with less spectral noise compared to the outer magnetospheric case.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.651-659
• /
• 2010

In this paper, a new six-port direct conversion receiver for high-speed multi-band multi-mode wireless communication system such as software defined radio(SDR) is proposed. The designed receiver is composed of two CMOS four-port BPSK receivers and a dual-band one-stage polyphase filter for quadrature LO signal generation. The four-port BPSK receiver, implemented in 0.18 ${\mu}m$ CMOS technology for the first time in microwave-band, is composed of two active combiners, an active balun, two power detector, and an analog decoder. The proposed polyphase filter adopt type-I architecture, one-stage for reduction of the local oscillator power loss, and LC resonance structure instead of using capacitor for dual-band operation. In order to extent the operation RF bandwidth of the proposed six-port receiver, we include I/Q phase and amplitude calibration scheme in the six-port junction and the power detector. The calibration range of the phase and amplitude mismatch in the proposed calibration scheme is 8 degree and 14 dB, respectively. The validity of the designed six-port receiver is successfully demonstrated by modulating M-QAM, and M-PSK signal with 40 Msps in the two-band of 900 MHz and 2.4 GHz.