• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.379-384
• /
• 1997

Al-15Cu-lMg alloys have been directionally solidified in 3mm diameter alumina tubes under the conditions of $760^{\circ}C$ of furnace temperature and 12 cm/hr of furnace moving velocity(V). By analyzing the evolution of the temperature profiles along the alloy length, the position of the solid/liquid interface, temperature gradient(G) and local growth velocity (R) were determined. These growth characteristics were compared for 6, 10, 14 cm length alloys. Steady state growth region was obtained in 15 cm length alloy, not in 6, 10 cm.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.2
• /
• pp.20-28
• /
• 1987

In general, preliminary hull form design is performed by changing a parent hull form using a computer to satisfy given requirements, e.g., principal dimensions, displacement, $L_{CB}$, and etc. Principal dimensions, $C_b,\;L_{CB}$ and midship sections are the only parameters to be modified in the traditional hull form variation methods available for preliminary design. In this paper, a method is presented in which local cross sections as well as principal dimensions and midship sections are modified according to design requirements. The method gives hydrostatic curves of modified hull form simultaneously. An optimization technique to satisfy the constraints of hydrostatic characteristics such as maximizing KM as a design requirement is also considered.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.150-155
• /
• 2011

The aim of this study was investigated long distance export condition of paprika from Korea to Canada, and evaluated the effect of non-perforated breathable films on the storability of paprika during MA storage in the simulated long distance export condition. The long distance export condition of paprika from Korea to Canada was $7{\pm}1^{\circ}C$ and RH 90% during shipping for 20 days, and then the temperature of that was increased to $13^{\circ}C$ for 3 hours during transferring from refrigerated container to storage room in Canada, and decreased $3{\sim}4^{\circ}C$ for 3 days before distributing to local markets. The temperature and relative humidity of local markets was $16^{\circ}C$ and 60%, respectively. The packing material treatments were non-packing, as control, perforated film (6 mm diameter hole, $18holes/m^2$), and 3 kind of laser treated non-perforated films (oxygen transmission rate was 5,000, 20,000 and 100,000 $cc/m^2{\cdot}day{\cdot}atm$). Under the simulated long distance export condition; $7^{\circ}C$ and RH 90% for 15 days and then $20^{\circ}C$ and RH 55% for 7 days, the fresh weight loss of paprika was less than 1% in 3 kind of laser treated non-perforated film treatments but was more than 4% in control and perforated film treatment that showed severe deterioration of visual quality after 20 days of storage. The atmosphere of paprika packages was changed 5% oxygen and 15% carbon dioxide in 5,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment, and 16% oxygen and 4~5% carbon dioxide in 20,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment during room temperature storage after cold storage for 15 days. A carbon dioxide concentration of these 2 treatments was exceeded the optimal MA and CA condition. There was no significant difference in ethylene concentration among 3 kind of laser treated non-perforated film treatments. A paprika packed with 100,000 $cc/m^2{\cdot}day{\cdot}atm$ non-perforated film showed the highest visual quality under the simulated long distance export condition. However, the firmness and soluble solids did not show any significant difference among 3 kind of laser treated non-perforated film treatments. Therefore, we may suggest that 100,000 $cc/m^2{\cdot}day{\cdot}atm$ laser treated non-perforated film was the proper film for MAP of paprika under long distance export condition that was $7{\pm}1^{\circ}C$ and RH 90% for 15 days, and then $20^{\circ}C$ and RH 55% for 7 days.

• Journal of the Korean Society of Combustion
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2013

Leading edge statistics are obtained by direct numerical simulation(DNS) of freely propagating incompressible and stagnating compressible turbulent premixed flames. Conditional averages of velocities in terms of reaction progress variable, c, and local flame surface density, ${\sum}^{\prime}_f$, are defined and compared through the flame brush. It holds asymptotically that $<u>_f=<S_d>_f$ and $<u>_u-<u>_b=D_t/L_w$ with the characteristic length scale of $\bar{c}$ variation, $L_w$. It also holds that $<u>_b=<u>_f$ for a freely propagating flame under no mean strain rate. The turbulent burning velocity, $S_T$, is determined by the conditional statistics at the leading edge under large activation energy.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.26-26
• /
• 2020

Daphne L. (Thymelaceae) comprises about 95 species distributing worldwide from N Africa, N India, SE Asia to E Asia and the coast of the Mediterranean of Europe. In Korea, five species of this genus have been described. In this study, we included four species (D. genkwa, D. pseudomezereum, D. kiusiana, D. jejudoensis) from Korea, excluding cultivated D. odora. The morphological characters through local surveys and the re-classification of the specimens collected in the Korea National Herbarium (KH) were carried out and distribution maps for each taxon were also prepared. The major characters include habit, trichomes in winter bud, leaf, and twig, phyllotaxis, inflorescence, size of calyx lobe and trichomes in the calyx tube, etc. The distribution map showed that D. genkwa is mainly distributed in the coastal area of Hwanghaenam-do, Pyeongannam-do, Jeollabuk-do and Jeollanam-do, whereas D. pseudomezereum is distributed in the limestone zone of Gangwon-do, Jeollabuk-do, and Gyeongsangbuk-do. Similarly, D. kiusiana is mostly found in Jeollanam-do, Gyeongsangnam-do, and Jeju-do. In addition, D. jejudoensis is known to be distributed in forests of Murueng, Andeok, and Seonheul-ri in Jeju-do, but recently, new habitat is discovered in the island forest areas of Jeollanam-do. However, some of these individuals showed the characteristics of D. kiusiana, thus before come to any conclusion detailed taxonomic review of D. jejudoensis and D. kiusiana is required.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.261-267
• /
• 1982

The objective of this study was to test germinability of sesame (Sesamum indicum L.) varieties at low temperatures. Seeds of III sesame varieties representing different maturity groups and countries were tested at four different temperatures between $10^{\circ}C$ and $16^{\circ}C$. Average germination percentages of III varieties were 92%, 57% and 3.3% at $16^{\circ}C, 14{\circ}C$ and $12^{\circ}C$.respectively. The highest daily germination percentage was observed after 4 days of incubation at $16^{\circ}C$, while it was after 8 days at $14^{\circ}C$. A regression analysis indicated that $15^{\circ}C$ as the minimum temperature for satisfactory germination in field conditions. In general, Korean local collections had better germinability than introduced varieties from 6 countries at different latitudes. 'San dong', a Korean local cultivar. showed the highest germination percentage (24%) at $12^{\circ}C$ when the average germination percentage of all varieties was as low as $3.3^{\circ}C$. Early maturity varieties germinated better at $12^{\circ}C$ and $14^{\circ}C$ than medium or late maturity groups, but no difference was observed at $16^{\circ}C$. Although larger seeds showed better germinability within a variety, there seems to be no relationship between seed size and germinability in sesame.in sesame.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.316-325
• /
• 2002

The deformation and coalescence behaviors of immiscible LDPE/PS blends (86.5/13.5 vol%) prepared by internal mixer were studied using rheometer and scanning electron microscope. The fine droplets coagulated at initial stage of mixing, and deformed fiber at large strain. The critical capillary number was calculated according to the empirical equation of De Bruijn and it was 0.95, the local capillary number was 3.867. The polymer blends were annealed at $200^{\circ}C$ for various time to investigate morphological change of polymer blends. The maximum size of droplet after annealing at $200^{\circ}C$ was found at ${\gamma}$=1798, and there was destruction of the morphology at 15 minutes of annealing time. The viscosity of matrix was critical to determine a coalescence of droplet.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.11-20
• /
• 2016

In this paper, a system that can collect GPS L1 C/A, GLONASS G1, and BDS B1I signals with single front-end receiver was implemented using a universal software radio peripheral (USRP) and its performance was verified. To acquire the global navigation satellite system signals, hardware was configured using USRP, antenna, external low-noise amplifier, and external oscillator. In addition, a value of optimum local oscillator frequency was selected to sample signals from three systems with L1-band with a low sampling rate as much as possible. The comparison result of C/N0 between the signal collection system using the proposed method and commercial receiver using double front-end showed that the proposed system had 0.7 ~ 0.8dB higher than that of commercial receiver for GPS L1 C/A signals and 1 ~ 2 dB lower than that of commercial receiver for GLONASS G1 and BDS B1I. Through the above results, it was verified that signals collected using the three systems with a single USRP had no significant error with that of commercial receiver. In the future, it is expected that the proposed system will be combined with software-defined radio (SDR) and advanced to a receiver that has a re-configuration channel.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.583-590
• /
• 2018

Genus Typha L. (Typhaceae; Cattail in common) is one of the hydrophytic plants found in semi-aquatic regions. About nine to 18 species of the genus exist all over the world. In Korea, the most commonly found cattail species are T. laxmanni and T. angustifolia. The aim of this study was to prepare a cDNA library and sequences and analyze expressed sequence tags (ESTs) from these species, T. laxmanni and T. angustifolia. In the case of T. laxmanni, we observed that 715 out of 742 ESTs had high quality sequences, whereas the remaining 27 ESTs were low quality sequences. In this study, we identified 77 contigs, 393 unassembled clones and 65.7% singletons. Furthermore, in the case of T. angustifolia, we recorded 992 high quality EST sequences, and by excluding 28 low quality sequences from among them, we retrieved 120 contigs, 348 unassembled clones and 48.9% singletons. The basic local alignment search tool (BLAST) and Kyoto encyclopedia of genes and genomes (KEGG) database results enabled us to identify the functional categories, i.e., molecular function (16.5%), biological process (22.2%) and cellular components (61.3%). In addition, between these two species, the no hits and anonymous genes were 4.2% and 11.7% and 6.2% and 11.2% in T. laxmanni and T. angustifolia, respectively, based on the BLAST results. The study concluded that they have certain species-specific genes. Hence, the results of this study on these two species could be a valuable resource for further studies.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.36-38
• /
• 2001

A basic structure of 2500V-4500V reverse-conducting GCT (RC-GCT) is given in this paper. The punch-through type (PT) is adopted for narrow N-base with high resistivity so that the fast turn-off and low on-state voltage can be achieved. The photo mask design was made upon the both turn-off performance and solution of separation between GCT and integrated freewheeling diode (FWD) part. The turn-on and turn-off characteristics for reserve-conducting gate commutated thyristors (RC-GCTs) were investigated by ISE simulation. Additionally, the local carrier lifetime control by proton irradiation was adopted so as not only to obtain the reduction of turn-off losses of GCT but also to reach a soft reverse recovering characteristics of FWD