• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.199-205
• /
• 2012

This work investigates the progressive linear precoder design for packet retransmissions in multi-input multi-output (MIMO) systems with multiple codewords and automatic repeat request (ARQ) bundling feedback. Assuming perfect channel state information, a novel progressive linear ARQ precoder is proposed in the perspective of minimizing the packet error rate. We devise the ARQ precoder by combining power loading and sub channel pairing between current retransmission and previous transmissions. Furthermore, we extend the design to the case that the channel estimation error exists. Numerical results show that the proposed scheme can improve the performance of MIMO ARQ systems significantly regardless of the channel estimation error.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.156-157
• /
• 2014

Inorganic binding material was made by recycled resource and its applicability as pile-filling material was examined. The result was that the material had same liquidity with the liquidity of OPC and high reactivity with site soil. According to dynamic/static loading tests by site test-construction, the inorganic binding material met both design bearing capacity and settlement. Since the inorganic binding material showed same or better performance than OPC, the utilization possibility of the inorganic binding material made of recycled resource as pile-filling material was verified.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.665-668
• /
• 2008

Propylene epoxidation by $H_2O_2$ (30% aqueous) as oxidant was studied in a semi-batch reactor using Ti-MCM-22 catalyst: Effects of reaction temperature, pressure, catalyst loading, solvent, and $H_2O_2$ concentration on $H_2O_2$ conversion (limiting reagent) were investigated. Product inhibition by propylene oxide was confirmed. Ti-MCM-22 maintained virtually the same catalytic performance over the 5 repeated cycles.

• Steel and Composite Structures
• /
• v.20 no.6
• /
• pp.1221-1236
• /
• 2016

Modular structures consist of standardized modules and their connections. A modular bridge pier is proposed to accelerate bridge construction. Multiple concrete-filled steel tubes (CFTs) using commercial steel tubes were chosen as the main members. Buckling restrained bracings and enhanced connection details were designed to prevent premature low-cycle fatigue failure upon cyclic loading. The pier had a height of 7.95 m, widths of 2.5 m and 2.0 m along the strong and weak axis, respectively. Cyclic tests were performed on the modular pier to investigate structural performance. Test results showed that four CFT columns reached yielding without a premature failure of the bracing connections. The ultimate capacity of the modular pier was reasonably estimated based on the plastic-hinge-analysis concept. The modular CFT pier with enhanced bracing showed improved displacement ductility without premature failure at the welding joints.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.469-483
• /
• 2014

In an indentation approach, the smooth rigid spherical ball penetrated into a deformable flat is considered for the study based on contact mechanics approach. The elastic-plastic frictionless spherical indentation analysis has been under taken in the finite element analysis using "ABAQUS" and experimental study. The spherical indentation has been studied for the materials like steel, aluminium, copper and brass with an identical spherical indenter for diverse indentation depths. The springback analysis is executed for studying the actual indentation depth after the indenter is unloaded. In the springback simulation, the material recovers its elastic deformation after the indenter is unloaded. The residual diameter and depth of an indentation for various materials are measured and compared with simulation results. It shows a good agreement between the simulation and an experimental studies.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.877-890
• /
• 2014

The purpose of this study is to present adequate modeling solutions for squat and slender RC walls. ASCE41-13 (American Society of Civil Engineers) specifies that the aspect ratios of height to width for the RC walls affect the hysteresis response. Thus, this study performed non-linear analysis subjected to cyclic loading using two different macroscopic models: one of macroscopic models represents flexural failure of RC walls (Shear Wall Element model) and the other (General Wall Element model) reflects diagonal shear failure occurring in the web of RC walls. These analytical results were compared to previous experimental studies for a slender wall (> aspect ratio of 3.0) and a squat wall (= aspect ratio of 1.0). For the slender wall, the difference between the two macroscopic models was negligible, but the squat wall was significantly affected by parameters for shear behavior in the modeling method. For accurate performance evaluation of RC buildings with squat walls, it would be reasonable to use macroscopic models that give consideration to diagonal shear.

• Wind and Structures
• /
• v.10 no.3
• /
• pp.249-268
• /
• 2007

Past experience indicates that the majority of failures of electrical transmission tower structures occurred during high intensity wind events, such as downbursts. The wind load distribution associated with these localized events is different than the boundary layer wind profile that is typically used in the design of structures. To the best of the authors' knowledge, this study represents the first comprehensive investigation that assesses the effect of varying the downburst parameters on the structural performance of a transmission line structure. The study focuses on a guyed tower structure and is conducted numerically using, as a case study, one of the towers that failed in Manitoba, Canada, during a downburst event in 1996. The study provides an insight about the spatial and time variation of the downburst wind field. It also assesses the variation of the tower members' internal forces with the downburst parameters. Finally, the structural behaviour of the tower under critical downburst configurations is described and is compared to that resulting from the boundary layer normal wind load conditions.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.410-414
• /
• 2004

Under longitudinal loading continuous fiber reinforced metal matrix composite(MMC) have interpreted an outstanding performance. However, the applicability of continuous fiber reinforced MMCs is somewhat limited due to their relatively poor transverse properties. Therefore, the transverse properties of MMCs are significantly influenced by the properties of the fiber/matrix interface. In this study, elastic-plastic behavior of transversely loaded unidirectional fiber reinforced metal matrix composites investigated by using elastic-plastic finite element analysis. Different fiber placement(square and hexagon) and fiber volume fractions were studied numerically. The interface was treated as three thin layer (with different properties) with a finite thickness between the fiber and the matrix. The analyses were based on a two-dimensional generalized plane strain model of a cross-section of an unidirectional composite by the ANSYS finite element analysis code.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.108-113
• /
• 1996

Conventionally, grinding of stainless steel, aluminium alloy, copper alloy, and titanum alloy is difficult due to the mechanical properties such as low hardness, high toughness which result in the loading of wheel and the poor surface finish. In order to grind this sort of materials easily, discontinuous grinding wheel with multi-porous grooves was newly developed. The multi-porous grooves were formed during wheel production. This discontinuous grinding wheel drastically increases the grinding performance. It is desirable to use the discontinuous grinding wheel when grinding materials with high efficiency and accuracy which is impossible by conventional wheels. In this paper, the construction and manufacturing method of grinding wheel with multi-porous grooves are explained. The grinding charateristics of discontinuous grinding wheel was also illustrated.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.109-118
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV. So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets.