• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1045-1049
• /
• 2001

Before building houses or apartments, we need to predict noise propagation to eliminate possible noise problems to residents. However, we do not try to predict noise propagation during estimation of noise effect for the developing area since we did not have a good mathematical model to predict noise level due to a traffic noise. In this article, an adequate mathematical model has been developed and proved to predict noise effect to living area due to a traffic noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.707-711
• /
• 2004

Recently, the interests about noises have increased with the rapid development of our living environment Until now the estimation methods to sounds have used the equivalent levels. The sensitivities of human beings aren't considered in these methods. It's a situation to need new estimation methods for environmental noises. They must be analyzed by the characteristics of sounds before making the noise regulations newly. In this study, the noises were measured around our living environment And the frequency analysis, Sound Quality Metrics, the cluster analysis and so on are used to classify the environmental noises.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.11-14
• /
• 2007

Noise level and Airflow amount of a kitchen hood are affected by the conditions of airflow path. Thus this study is expected to be used as a basic reference in designing airflow path of apartment housing throughout analysing changes in noise level and airflow amount from the various conditions of airflow path. Noise level generated by the kitchen hood is estimated in a kitchen and a living room of two constructed apartment houses, and an experiment is conducted in an half anechoic chamber to analyze noise level and airflow amount by the different length, diameter and number of windings of a round shaped soft duct which is connected to the kitchen hood. The measured results in apartment houses show that the noise level in both apartments exceeds the NC standard greatly in living spaces. In apartment A, a regular apartment house, the noise level was $NC-65{\sim}75$, $NC-45{\sim}60$ and NC-70, NC-45 in the kitchen and living room with an operation of kitchen hood in 1 and 3 stages. In apartment B, an apartment complex, the noise level was NC-55 and NC-60 in the kitchen and living room with an operation of kitchen hood in 3 stages. In particular, there was an increase of noise level at 125Hz-band resulted from an amplification of sound, which requires adequate measures in noise reduction. The results measured in Half anechoic chamber show 99% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 100mm to ${\Phi}$ 125mm, 37% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 125mm to ${\Phi}$ 150mm, and 173% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ l00mm to ${\Phi}$ 150mm. The noise level was lower than the level measured in apartment housing about 20 in NC-value and 11.4 in dB(A)-value, which was interpreted as the effect of the load by the pressure condition at the rear end of the duct. Also, an amplification of sound in 125Hz-band influenced NC-value considerably, therefore effective measure is needed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.357.1-357
• /
• 2002

The purpose of this study is to propose indoor noise level in residential buildings affected by transportation noise (road traffic, railway and air-craft noise) based on subjective evaluations. 30 subjects participated in the experiment to evaluate the noise. Experimental environment reproduced real living and office environment, and in asking subjects' annoyance to the noise. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1020-1023
• /
• 2004

Recently, Cooling tower are used the necessary element in a residential area and living space on the viewpoint of indoor temperature control. The purpose of this study is to assistance the comfortable environment and economical measures of noise transmission mechanism on tile cooling tower. The results show that noise evaluation interact the main factor of distance reduction and diffraction reduction. Noise criterion apply to the NC level and equivalent transmission loss about already the design of noise reduction.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.589-597
• /
• 2010

The indoor noise of the naval vessel is very important considering hearing protection, improvement of working environment and easily communication between crews. When the environment of the naval vessel suffering from the noise is considered, it is very important to be quiet in the living area where the crews have a rest sufficiently. In addition, the noise of the working area should be reduced in order to increase working efficiency. Therefore, in this research, the satisfactions about the indoor noise are survey for crews working in a naval vessel. Through this survey, the relationship between the indoor noise and crew's satisfaction about it can be found. As a result, the limit of sound pressure level which almost all crew can be satisfied with the indoor noise about their living and working area is suggested base on the survey in this research.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.1
• /
• pp.34-41
• /
• 2002

There m many noise sources in living environment. Especially, noise that happen in apartment or tenement house may make neighborhood serious troubles. Thus, the development of new materials to reduce and improve the living noises is required. During past decade, various methodologies have been developed and researched to reduce and improve the living noises. However, there are many problems to apply these methodologies to practical our environment. In this thesis, we develop the new artificial material supporting high porous materials and lower pressure density to improve the problem caused in the safety design and sound absorbing material. To prove the efficiency of the developed methodology, we compare our methodology with conventional methodologies and also suggest an alternative methodology to contribute quiet life environments.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 1994.05a
• /
• pp.11-17
• /
• 1994

The increase of road traffic niose in residential area has been considered to be a serious environmental problem to deteriorate a living condition. The understanding of noise environment in multiple family housing is needed for noise reduction. This study attempts to find out the characteristics of noise environment. For this purpose, the field survey has been carried out to investigate the noise environment(sound level, quality of sound) and the residents' responses(noiseness, annoyance) for noise environment based on 173 households living in 3 apartment compounds built in Pusan according to site location. The major findings are as follows : 1. The sound levels by road traffic noise were measured by dB(A) and dB(Lin). The sound levels were : 77.0dB(A), 86.6dB(Lin) in D-Apt, 73.3dB(A), 82.6dB(Lin) in K-Apt, and 59.1dB(A), 74.6dB(Lin) in M-Apt. Especially, the difference between dB(A) and dB(Lin) was very big in the cae of M-Apt with a barriers for traffic noise reduction. 2. The internal sound levels were shown the soudn attenuation by horizontal distance and by opening or shuting condition of windows.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.6-10
• /
• 2005

With the rapid industrial development, railways have become a main traffic means of transportation. However, rail traffic noise and vibration have become a major problem in urban areas which is a very serious issue for the living environment. Especially, railway noise induced by rail operations has influenced on the residents living near railway tracks. The purpose of this paper is to investigate the Raynoise modeling in railway applications. Generally, my acoustics have been used to investigate the effectiveness of noise barriers in railway applications and barriers are modeled using the commercial software Raynoise. A-weighted sound pressure level have been measured at six locations, 4m from the track and are compared with experimental values. Based on the analysis of the results, Comparison between numerical and experimental values are within 1dB (A). Also, when a train is m through the Raynoise modeling, the general influential sphere of railway noise can be determined. Therefore, this study will be using basic data in establishing effective railway noise prevention plans far the future. Also, we could know that is applicable of Raynoise modeling at railway noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.291-298
• /
• 2015

In this study, the reverberation time of apartment living room was measured and distribution of the reverberation time was analyzed. In addition, sound field characteristics of mock-up test room similar with living room and timber structured bedroom was investigated with addition of furniture and sound absorption material. Average reverberation time of unfurnished apartment unit was 1.11 s, and reverberation time in 630 Hz~2000 Hz bands were longer than 1.2 s. It was found that from the field measurement results, reverberation time characteristic of furnished apartment living room was uniform in most of frequency bands. Averaged reverberation time of furnished living room was 0.48 s and the reverberation time of bedroom was 0.44 s. Standardized sound pressure level correction values were calculated from the average reverberation time of furnished and unfurnished apartment units. The correction value of unfurnished living room was −3.4 dB and that of furnished living room was 0.2 dB. Measured reverberation time of furnished and unfurnished apartment units indicated that reference reverberation time; 0.5 s, in KS and ISO standards is reasonable also in Korean residential environment.