• Safety and Health at Work
• /
• 제15권1호
• /
• pp.114-117
• /
• 2024

A lithium-ion battery is a rechargeable battery that uses the reversible reduction of lithium ions to store energy and is the predominant battery type in many industrial and consumer electronics. The lithium-ion batteries are essential to ensure they operate safely. We conducted an exposure assessment five days after a fire in a battery-testing facility. We assessed some of the potentially hazardous materials after a lithium-ion battery fire.We sampled total suspended particles, hydrogen fluoride, and lithium with real-time monitoring of particulate matter (PM) 1, 2.5, and 10 micrometers (㎛). The area sampling results indicated that primary potential hazardous materials such as dust, hydrogen fluoride, and lithium were below the recommended limits suggested by the Korean Ministry of Labor and the American Conference of Governmental Industrial Hygienists Threshold Limit Values. Based on our assessment, workers were allowed to return to work.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.472-480
• /
• 2009

In this paper, a charge equalization converter with parallel-connected primary windings of transformers is proposed. The proposed work effectively balances the voltage among Lithium-Ion battery cells despite each battery cell has low voltage gap compared with its state of charge (SOC). The principle of the proposed work is that the equalizing energy from all battery strings moves to the lowest voltage battery through the isolated dc/dc converter controlled by the corresponding solid state relay switch. For this research a prototype of four Lithium-Ion battery cells is optimally designed and implemented, and experimental results show that the proposed method has excellent cell balancing performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.256-258
• /
• 2007

A charge equalization converter with parallel-connected primary windings of transformers is proposed in digest. The proposed work effectively balance the voltage among Lithium-Ion battery cells despite each battery cell has low voltage gap compared with its SOC. The principle of the proposed work is that the equalizing energy from all battery strings moves to the lowest voltage battery through the isolated dc/dc converter controlled by the corresponding bi-directional switch. In this digest, a prototype of four Lithium-Ion battery cells is optimally designed and implemented, and experimental results show that the proposed method has excellent cell balancing performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.347-349
• /
• 2007

Charge equalization scheme for HEV lithium-ion battery system is proposed in this paper, where all the primary windings with in parallel bi-directional switches are coupled in series to provide the equalizing energy from the whole battery string to the specific under charged cells. Moreover, to realize minimized size of equalization circuit employing the proposed cell balancing scheme, the optimal power rating design rule according to equalization time and SOC distribution of imbalance is proposed. A prototype of HEV lithium-ion battery system of four cells shows the outstanding charge equalization performance while maintaining greatly reduced size of cell balancing circuit.

• 전자통신동향분석
• /
• 제38권5호
• /
• pp.90-99
• /
• 2023

Recently, with the trend of information technology convergence and electrification, batteries are being widely used in fields such as industry, transportation, and specific applications. By 2030, the secondary battery market is expected to grow explosively by more than eight times compared with 2020 to $351.7 billion owing to the expanding adoption of electric vehicles. Depending on the electrochemical reactions in the electrode, a primary battery can only discharge through an irreversible reaction, while a secondary battery can be repeatedly charged and discharged using reversible reactions. According to the type of charge carrier ions, secondary batteries may be classified into those made of lithium, sodium, potassium, magnesium, and aluminum ions. We analyze the current status and technological issues of lithium-ion batteries, lithium-sulfur batteries, and solid-state batteries, which are representative examples of lithium secondary batteries. In addition, research trends in lithium secondary batteries are discussed.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.175-181
• /
• 2015

In this study, a lithium polymer battery (LiPB) is simply expressed by a primary RC equivalent model. The PI state observer is designed in Matlab/Simulink. The non-linear relationship with the OCV-SOC is represented to be linearized with 0.1 pu intervals by using battery parameters obtained by constant-current pulse discharge. A state equation is configured based on battery parameters. The state equation, which applied Peukert's law, can estimate SOC more accurately. SOC estimation capability was analyzed by utilizing reduced Federal Test Procedure (FTP-72) current profile and using a bi-directional DC-DC converter at temperature ($25^{\circ}C$). The PI state observer, which is designed in this study, indicated a SOC estimation error rate of ${\pm}2%$ in any of the initial SOC states. The PI state observer confirms a strong SOC estimation performance despite disturbances, such as modeling errors and noise.

• 공업화학
• /
• 제34권5호
• /
• pp.534-540
• /
• 2023

일차전지 환원극의 활물질로 널리 사용되고 있는 불화탄소는 낮은 전기 전도도, 표면 에너지 및 전해질 투과도 등의 요인에 의하여 Li/CF_X 일차전지의 율속 성능 저하를 초래한다. 따라서 본 연구에서는 산소 플라즈마를 이용한 표면처리를 통하여 표면이 개질된 불화탄소를 리튬 일차전지의 환원극으로 사용하여 전지 성능을 향상시키고자 하였다. XPS 및 XRD 분석을 통해 산소 플라즈마 처리에 의해 변화된 불화탄소의 표면 화학적 특성 및 결정 구조 변화를 분석하였으며, 이에 따른 리튬 일차전지의 전기 화학적 특성에 대한 변화를 분석하고 고찰하였다. 그 결과, 탄소 대 불소비율(F/C) 비율이 가장 낮은 산소 플라즈마 처리 조건(7.5 min)에서 반이온성 C-F 결합이 가장 많이 형성되었다. 또한, 이 조건에서 제조된 불화탄소를 환원극의 활물질로 사용한 일차전지는 가장 높은 3 C의 율속 특성을 보였으며, 고율속에서도 비교적 높은 용량(550 mAh/g)을 유지하였다. 본 연구를 통하여, 산소 플라즈마 처리를 통해 불화탄소의 불소함량 및 탄소-불소 간의 결합 유형을 조정하여 고율속 성능을 가진 리튬 일차전지를 제조할 수 있었다.

• 자원리싸이클링
• /
• 제14권6호
• /
• pp.37-43
• /
• 2005

페리튬이온전지로부터 회수된 코발트와 리튬 침출액으로부터 화염분부열분해법에 의하여 $LiCoO_{2}$ 나노분말을 제조하였다. 리튬 및 코발트 성분을 함유하는 전극물질은 열처리 및 기계적 처리에 의해 그 농도를 증가 시켰다. 리튬이온전지 양극물질을 질산으로 용해한 다음 침출액중 Li과 Co의 당량비가 1.0 되도록 $LiNO_{3}$로 조절하여 화염분무열분해용 전구체를 제조하었다. 화염분무열분해법에 의해 제조된 $LiCoO_{2}$ 분말의 평균입자크기는 전구체의 몰 농도가 증가하면서 증가되었으며, 화염온도 역시 입자의 크기를 증가시켰다. 변수실험 결과 $11{\~}35nm$ 크기의 결정형 $LiCoO_{2}$ 나노분말을 제조할 수 있었다 또한 나노 $LiCoO_{2}$의 전극재료로서의 가능성을 확인하기 위하여 충방전 특성 평가와 같은 전기화학적 분석을 수행하였다.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.39-44
• /
• 2010

1.5 V and 3.0 V-class film-type primary batteries were designed for radio frequency identification (RFID) tag. Efficient fabrication processes such as screen-printings of conducting layer ($25{\mu}m$), active material layer ($40{\mu}m$ for anode and $80{\mu}m$ for cathode), and electrolyte/separator/electrolyte layer ($100{\mu}m$), were adopted to give better performances of the 1.5 V-class film-type Leclanch$\acute{e}$ primary battery for battery-assisted passive (BAP) RFID tag. Lithium (Li) metal is used as an anode material in a 3.0 V-class film-type $MnO_2||$Li primary battery to increase the operating voltage and discharge capacity for application to active sensor tags of a radio frequency identification system. The fabricated 3.0 V-class film-type Li primary battery passes several safety tests and achieves a discharge capacity of more than 9 mAh $cm^{-2}$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.350-352
• /
• 2007

Modularized charge equalization converter for HEV lithium-ion battery cells is proposed in this paper, in which intra-module and inter-module charge equalization can be achieved at the same time. For intra-module charge equalization, the conventional flyback DC/DC converters of low power and small size are employed, in which all of the primary sides are coupled in parallel for selective charge of the specific under charged cell within the module. For inter-module charge equalization, the flyback DC/DC converters are also added, in which all the secondary windings are electrically linked in parallel for automatic charge balancing among the modules. An engineering sample of forty cells hiring the proposed cell balancing scheme is implemented and its experimental result shows that the proposed modularized charge equalization circuit has good cell balancing performance.