• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.19-19
• /
• 2002

Perovskite-type titanate dielectrics have attracted much attention in memory devices such as DRAMs or FeRAMs due to their high dielectric constants. However, low volatility of the Ba, Sr, Pb or Zr precursors with only thd ligands has limitations in obtaining high quality thin films by liquid source metal organic chemical vapor deposition (LS-MOCVD) processes. To improve the volatility of these precursors, many attempts have been made such as adding polyether ligands to satisfy the coordinative saturation. We report the synthesis of new precursors Ba(thd)₂(tmeea) and Sr(thd)₂(tmeea), where tmeea = tris[2-(2-methoxyethoxy)ethyl]amino, and LS-MOCVD of barium strontium titanate (BSTO) thin films using these precursors. Due to increased basicity of amines compared with ethers, it is expected that the nitrogen-donor ligand will make a strong bond to a metal than an analogous oxygen-donor ligand, consequently improving the volatility and thermal behavior of these precursors. Thin films of BSTO were grown on Pt(111)/SiO₂/Si(100) substrates by LS-MOCVD using a cocktail source consisting of the conventional Ti precursor Ti(thd)₂(O/sup i/Pr), and these new Ba and Sr precursors. As-grown films were characterized by XPS, SEM, XRD, XRF, and C-V and I-V measurements. BSTO films grown at 420℃ were stoichiometric barium strontium titanate with very smooth surface morphology and their dielectric constants were found to be as targe as 450. Dependence of the composition, microstructure and the electrical properties of the BSTO films on the growth temperature, annealing temperature, working pressure, and the composition of the cocktail source will be discussed.

• Archives of Pharmacal Research
• /
• 제11권3호
• /
• pp.240-243
• /
• 1988

The hexane extract from Nutmeg, the seed of Myristica fragrans significantly inhibited hepatic drug-metabolizing enzyme activity. Through systematic fractionation by $SiO_2$ column and vacuum liquid chromatography monitoring by bioassay, three components, myristicin, (I), licarin-B (II) and dehydrodiisoeugenol (III) were isolated as active principles. Compounds II and III, with a single treatment (200mg/kg, i.p.) showed not only a significant prolongation of hexobarbital-induced sleeping time but also a significant inhibition of aminopyrine N-demethylase and hexobarbital hydroxylase activities in mice. Compounds I and II provoked a sleep episode at a subhypnotic dose of HB, suggesting that they possess CNS-depressant properties.

• 한국방사선학회논문지
• /
• 제4권2호
• /
• pp.27-30
• /
• 2010

방사선 광변조기는 방사선량에 비례하여 액정셀의 광투과율의 변화를 이용하여 선량을 측정하는 소자이다. 본 연구에서는 이러한 방사선 광변조기 적용을 위해 광도전체 필름을 제작하여 전기적 특성을 비교하였다. 필름제조는 침전법과 인쇄법을 이용하여 ITO 유리기판 위에 $200{\mu}m$의 두께로 형성하였다. 전기적 특성을 분석하기 위해 I-V측정을 하였으며, 측정된 누설전류와 민감도 값을 이용하여 신호대잡음비(SNR)를 얻었다. 측정결과, 인쇄법에 비해 침전법에 의해 제조된 $HgI_2$ 필름이 약 40%의 누설전류 저감효과를 보였으며, 민감도는 $1V/{\mu}m$의 전기장에서 2배 높은 값을 얻었다. 또한, 침전법에 의해 제조된 $PbI_2$, PbO, CdTe 필름에 비해 $HgI_2$ $1V/{\mu}m$에서 10~25배 높은 신호대잡음비를 가짐을 알 수 있었다. 이러한 결과로부터 침전법에 의해 제조된 $HgI_2$ 광도전체를 방사선 광변조기에 적용함으로써 방사선량 검출기의 우수한 특성을 가질 수 있을 것으로 기대된다.

• 전기화학회지
• /
• 제13권2호
• /
• pp.145-152
• /
• 2010

본 연구에서는 organophosphate를 기반으로 한 과불소화된 아크릴레이트 가교제를 사용하여 제조한겔 고분자 전해질의 이온 전도도 및 전기화학적 특성을 평가하였다. 과불소화된 아크릴레이트 가교제를 사용하여 만든 겔 고분자 전해질은 액체전해질의 함량이 최대 97 wt%까지 안정한 겔 상태를 유지하였다. 본 연구에서 제조한 겔 고분자 전해질의 이온전도도는 $30^{\circ}C$에서 $1.0\;{\times}\;10^{-2}\;S/cm$의 값을 가졌다. 또한 전기화학적 안정성 테스트에서도 약 4.5V로 이상까지 산화에 의한 열화가 없이 안정하였다. 합성된 겔고분자 전해질을 리튬이온 고분자 전지에 적용하여 그 활용성을 평가하였다. 양극으로는 $LiCoO_2$를 사용하였으며 음극으로는 카본을 사용하였다. 이렇게 만든 리튬이온 고분자 전지는 0.1C에서 136.11 mAh/g의 용량으로 이론용량과 거의 비슷한 값을 나타내었으며, 2C 방전에서도 초기 용량의 91%를 유지하였다. 또한 500번의 충방전 후에도 초기 용량의 70%정도의 용량을 유지하였다.

• 연구논문집
• /
• 통권33호
• /
• pp.5-16
• /
• 2003

Fuel distribution, combustion, and flame propagation characteristics of heavy duty engine with the liquid phase LPG injection(LPLI) were studied in a single cylinder engine. Optically accessible single cylinder engine and laser diagnostics system were built for quantifying fuel concentration by acetone PLIF(planar laser induced fluorescence) measurements. In case of Otto cycle engine with large bore size, the engine knock and thermal stress of exhaust manifold are so critical that lean burn operation is needed to reduce the problems. It is generally known that fuel stratification is one of the key technologies to extend the lean misfire limit. The formation of rich mixture in the spark plug vicinity was achieved by open valve injection. With higher swirl strength(Rs=3.4) and open valve injection, the cloud of fuel followed the flow direction and the radial air/fuel mixing was limited by strong swirl flow. It was expected that axial stratification was maintained with open-valve injection if the radial component of the swirling motion was stronger than the axial components. The axial fuel stratification and concentration were sensitive to fuel injection timing in case of Rs=3.4 while those were relatively independent of the injection timing in case of Rs2.3. Thus, strong swirl flow could promote desirable axial fuel stratification and, in result, may make flame propagation stable in the early stage of combustion.

• Journal of Applied Biological Chemistry
• /
• 제62권4호
• /
• pp.399-406
• /
• 2019

현삼(Scrophularia buergeriana) 뿌리를 80% Methanol수용액으로 추출한 뒤, 감압 농축한 추출물을 EtOAc, n-BuOH과 H₂O층으로 계통 분획을 실시하였다. n-BuOH분획에 대하여 silica gel, octadecyl SiO₂ column chromatograph 및 중압분취(MPLC) 장비를 반복 실시하여 4종의 phenylethanoid glycoside 및 iridoid glycoside계의 화합물을 분리하였다. NMR 및 Mass데이터를 해석하여, harpagoside (1), angoroside C (2), aucubin (3) 및 acetoside (4)로 구조 동정하였다. 분리한 4종의 화합물에 대하여 HPLC 분석법을 이용하여 정량분석한 결과, 11.5 mg/g (1), 7.6 mg/g (2), 41.2 mg/g (3), 및 4.8 mg/g (4) 이 현삼 뿌리에 함유된 것을 확인하였다. 현삼으로부터 분리된 화합물 중 angoroside C 및 acetoside는 에탄올에 의해 저해된 세포 성장률을 검증한 결과, 간암세포종인 HepG2세포에 대해서 간세포를 보호하는 효과가 있음을 확인하였다.

• 센서학회지
• /
• 제16권6호
• /
• pp.395-400
• /
• 2007

Ambient drying sol-gel processing was used for monolithic silica ambigels in the temperature range of $130-250^{\circ}C$. A new method of mesopore ambigels, which mean the aerogels prepared by ambient pressure drying process synthesis, is suggested at first. This method includes two important approaches. The first point is that $SiO_{2}$ surface modification of wet gel was performed by trimethylchlorosilane in n-butanol solution. This procedure is provided the silica gel mesopore structure formation. The second point is a creation of the ternary azeotropic mixture water/n-butanol/octane as porous liquid, which is effectively provided removing of water such a low temperature by 2 step drying condition under ambient pressure. The silica aerogels, which were prepared by ambient pressure drying from azeotropic mixture of water/n-butanol/octane, are transparent, crack-free and mesoporous (pore size ${\sim}$ 5.6 nm) with surface area of ${\sim}$ $923{\;}m^2/g$, bulk density of $0.4{\;}g/cm^3$ and porosity of 85 %.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.123-127
• /
• 1993

New lipophilic Crown-4 compounds of 16-membered rings containing furan (neutral carrier,I), tetrahydrofuran (neutral carrier,II) and lithium complex of the latter (neutral carrier,III) have been synthesized and tested as the active sensors for lithium ion in poly(vinyl chloride) (PVC) membrane electrode, in the presence and absence of an anion excluder, tetrakis(4-chloro-phenyl)borate (KTClPB), 2-nitrophenyl phenyl ether (NPPE), tris(2-ethylhexyl)phosphate (TEHP), o-nitrophenyl octyl ether (NPOE), dioctyl adipate (DOA), bis(2-ethylhexyl)adipate (BEHA), di-n-octylphenyl phosphonate (DOPP) were used as plasticizing solvent mediators. The electrode response function had a nearly Nernstian slope of 54-61 mV per decade (25$^{\circ}$C) within the concentration range of $10^{-1}-10^{-4}$ M LiCl and the detection limits for all electrodes were ca. $5{\times}10^{-4}$ M. The response time of the electrode was faster at the higher lithium concentration and the response of the electrode was stable for longer than 6 months. The sensor membranes exhibit improved response times and increased lifetimes as compared to the system described earlier.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.171-182
• /
• 1995

Five eucryptite and ten spodumene compositional powders were syntehsized from three sillimanite group, two kaolin group, and five pyrophyllite group silicate minerals. Those powders were isotatically pressed and fired at 1200~135$0^{\circ}C$ for 2 hrs, and then the sintered bodies were characterized. Silicate minerals with molar ratio of Al2O3 to SiO2 correspond to those of eucryptite and spodumene are kaolin and pyrophyllite group silicate minerals, respectively. Sintering characteristics of eucryptite from kaolin group and spodumene from pyrophyllite group mineral were superior to those from other silicate minerals. Eucryptite sintered bodies with 95~97% relative densities and densified microstructures can be obtained using Hadong pink kaolin as starting materials by sintering over broad temperature zone(1250~135$0^{\circ}C$). The eucryptite sintered bodies which were fired at 130$0^{\circ}C$ for 2hrs, from Hadong pink kaolin had within 3.0wt% microstructural compositional variations compaired with stoichiometric compound, and had good negative thermal expansiion property with -3.55$\times$10-6/$^{\circ}C$ thermal expansion coefficient. Spodumene sintered bodies which were prepared from pyrophyllite group silicate minerals, had dense microstructures and high densities by densification through liquid phase sintering with enlarged temperature range. The specimens which were fired at 130$0^{\circ}C$ for 2 hrs from Gusipyrophillite, had dense microstructure with crystallines mainly, and low thermal expansion property with 0.62$\times$10-6/$^{\circ}C$ thermal expansion coefficient. The porous texture and residual glass phase in LAS system ceramics which were prepared from silicate minerals, tend to increase the thermal expansion properties of sintered bodies to positive direction.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.214-217
• /
• 1999

We investigated the quench characteristics of meander line type resistive superconducting fault current limiters based on YBCO thin films grown on 2" diameter LaAlO$_3$ substrates. A gold layer was deposited onto the 0.4 ${\mu}$ m thick YBCO film to disperse the heat generated at hot spots, prior to patterning into 1 mm wide meander lines by photolithography. The limiters were tested with simulated fault currents of various amplitudes. The quench started at 10 A and was completed within 1 msec at the fault current of 65 A$_{peak}$. The dynamic quench characteristics were explained based on the heat conduction within the film and the heat transfer between the film and the surrounding liquid nitrogen. The heat transfer coefficient per unit area was estimated to be 3.0 W/cm$^2$K.