• 대한의용생체공학회:의공학회지
• /
• 제7권1호
• /
• pp.21-34
• /
• 1986

In this paper, we described the ECG telemetry system via the Public Telephone Line. The system consist of a signal acquisition and measurement section, a signal processing section, and a signal transmission section. It used 8 bits microprocessor. The transmission section is composed of 3 ch. analog modulators and 1 ct. digital modem. Especially, using the digital modem, signal is transmitted with about 50n data reduction ratio by the TP (Turning Point) algorithm. The acoustic coupler or inductive coil for linking the public telephone line are used. The speed of the digital modem is 300 baud rate. The MCBS (Multi Channel Biotelemetry System) is tested and evaluated through the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.297-299
• /
• 2003

This paper proposes a totally new method in the chaos characteristics analysis of power systems, the introduction of topological invariants. Using a return histogram the bifurcation graph was drawn, the periodic orbits and topological invariants the local crossing number, relative rotation rates, and linking number during the process of period-doubting bifurcation and chaos were extracted. This study also examined the effect on the topological invariants when the sensitive parameters were varied. In addition, the topological invariants of a three-dimensional embedding of the strange attractor was extracted and the result was compared with those obtained from differential equations. This could be a new way for a state detection and fault diagnosis in a dynamical system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.253-257
• /
• 2000

This paper reports on the development of the analysis program of the piston skirt system, PS-LAP. It is essential to verify the stability of the design and to improve the performance of the system. In order to do that efficiently, it is required that integrated and interactive simulation analysis program. PS-LAP is developed in the base of the object-oriented, capsulation, modulization, OLE(objected linking and embedding) and variational design theory. So it contain the expandability and flexibility of the structure. In addition to that, it is programed to make the convenient user interface by using the visualization programming. It can support the modification of the piston skirt shape, lubrication condition and so on. It is expected to reduce the money and effort for design the piston skirt system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.1081-1083
• /
• 2009

건축 현장에서 사용되는 데이터들은 정보를 단순히 시각화하거나 하나로 취합하는 작업에 중점을 두고 있어, 전체 건설 프로세스 상에서 관리할 수 있는 시스템의 개발이 매우 필요하다. 본 논문에서는 건축 공사 전반에 공통적으로 사용 되는 자료들을 축적함으로써 건설 단계별 전반적인 정보의 흐름을 효과적으로 구현 할 수 있는 웹기반 BPMS(Building Process Management System)의 프로토타입을 개발하고자 한다.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.34-38
• /
• 2020

In this paper, we implement a Dashcam system capable of shooting 360 degrees using a Raspberry Pi, shock sensors, distance sensors, and rotating camera with a servo motor. If there is an object approaching the vehicle by the distance sensor, the camera rotates to take a video. In the event of an external shock, videos and images are stored in the server to analyze the cause of the vehicle's accident and prevent the user from forging or tampering with videos or images. We also implement functions that transmit the message with the location and the intensity of the impact when the accident occurs and send the vehicle information to an insurance authority with by linking the system with a smart device. It is advantage that the authority analyzes the transmitted message and provides the accident handling information giving the user's safety and convenience.

• 산업공학
• /
• 제12권2호
• /
• pp.319-328
• /
• 1999

Today, offshore design field is concerned with system integration such as CIM(Computer Integrated Manufacturing), PDMS(Product Data Management System) and EDMS(Engineering Data Management System) in order to cope with the change of engineering specification as owner's requirements during construction stage of the project. This paper deals with the case study that describes about the efficient interface between material control system and 3D CAD system to support the design process in offshore industry using design rules involved the designer's knowledge. In this paper, we constructed an information system, called knowledge-based CAD interface systems, which is composed material code management system and 3D specification generator which automatically creates 3D catalogue anti specification by linking the material code, called short code, and the specification components of the 3D CAD system. As a result of the construction, it is possible to maintain consistency of the design process, and through reduction of the design processing time and improvement of the design process, competitiveness is improved.

• 통상정보연구
• /
• 제8권4호
• /
• pp.71-88
• /
• 2006

This article want to discuss on comparative research between CHIPS and Fedwire as the cross-border payment systems which America have and use at present. CHIPS is a New York-based automated private-sector clearing facility for large-dollar transfers. It is a central switch communication and settlement system whose 53 participating banks exchange same-day payment messages over dedicated communication lines linking each one to the CHIPS central computer. On January 22, 2001, CHIPS introduced immediate finality for payment released from the CHIPS queue. Unlike the Fedwire system, The CHIPS system is not a real-time gross settlement system. Instead, CHIPS is hybrid system that uses a computer program to select payment order in a queue for release to the receiving bank. CHIPS are governed by CHIPS Rules and Administrative Procedures. Fedwire system is a nationwide electronic fund-transfer system facilitating same-day transfers throughout the United States. It is a gross settlement system providing immediate credit to the receiving bank's master account. Communicating between a Federal Reserve Bank and Fedwire users can be either on-line or off-line. Fedwire transfers are governed by Subpart B of Regulation J, issued by the Federal Reserve Board, which incorporates U.C.C. Article 4A but preempts or supersedes any of its inconsistent provisions.

• Journal of Community Nutrition
• /
• 제5권4호
• /
• pp.209-217
• /
• 2003

The food and nutrition system is a network of processes linking agriculture, food, eating, nutrition, and health. The system includes a series of nine stages (production, processing, distribution, acquisition, preparation, consumption, digestion, transport, and utilization) and two types of contexts (biophysical and sociocultural). Analysis of whole food and nutrition systems provides information about the structure and processes involved in the complete scope of food and nutrition, assisting in the identification of ″upstream″ influences and ″downstream″ consequences in the system. The current analysis gathered existing data about the food and nutrition system in South Korea from public sources and professional publications, and interpreted that information to consider how different elements of the system contribute to health. The findings revealed that South Korea has substantial domestic food production and processing supplemented by imports, widespread food distribution in markets and a growing number of Korean and Western restaurants, a relatively low percentage of household income spent on food, growing use of new food preparation methods such as microwave ovens, a rice/vegetable/fish based three-meal consumption pattern, few recorded digestive problems, increasing calorie storage as body fat, and a relatively low chronic disease prevalence compared to other developed societies. Examination of the full scope of the food and nutrition system provides a broad perspective using whole system thinking that can identify potential strategies for future research and intervention.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.370-374
• /
• 2015

Various protective equiptments are used for the power system control and protection. Numerous facilities are monitored at the same time in real time and introduction of optimization method and analysis of the method are required for generation control and facility management considering the demand fluctuations. However, the existing system analysis programs are difficult to link with the other sw and there are some problems with user convenience. To solve these problems the present conditions of the system are figured out in real time and the equipment insert method was estimated by optimization method, and the system that showed the system analysis program is developed. PSS/E has been used as system anlysis program for stabilizing system development which applied the optimization. method and Python language is applied in order to link the input and output values with the DB automatically. Lastly, DLL of matlab has been made included in C++ for solving the objective function using opmization method.By linking this to DB, power flow was calculated in PSS/E and the result was represented by Intouch screen.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.209-213
• /
• 2005

현재 우리나라는 선박자동식별장치(AIS)를 육상기지국 22개소, 운영시스템 11기 및 전국 통합망 구축사업을 완료하여 AIS 망과 시스템이 본격적으로 운용되고 있다. 그러나 항만 또는 항만 인근에서 레이더 탐지구역의 제한으로 인하여 한정된 서비스 범위를 갖는 해상교통관리제도(VTS)와 AIS를 연계하여, 서비스 범위를 인접해역과 연안수역까지 확대하여 선박교통을 관리할 필요성이 제기되고 있다. 따라서 본 논문에서는 기 구축된 AIS 시스템의 현황을 분석하고, 현행 시스템의 기술적 개선사항과 운영적 개선사항을 제시한다.