• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.1
• /
• pp.9-15
• /
• 2003

This Paper deals with the design of Moving Magnet type Linear Oscillatory Actuator(MM-LOA) using spring damper based on the design procedure and the characteristic analysis. MM-LOA is applied to variable load such as vaccum pump and compressor, The structure of piston type is selected to reduce a noise. MM-LOA has over-displacement in starting state because of the low inertia of mover To improve the starting characteristic, spring damper is used. The optimum spring constant of spring damper is detected and in consideration of spring damper, MM-LOA redesigned. The parameter is calculated by Finite Element Method(FEM). For the dynamic characteristic analysis, time differential method composed of voltage and kinetic equation is used. The propriety of the improved model is verified through the experimental results.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.355-372
• /
• 2013

The Gringorten estimator has been extensively used in extreme value analysis of wind speed records to obtain unbiased estimates of design wind speeds. This paper reviews the derivation of the Gringorten estimator for the mean plotting position of extremes drawn from parents of the exponential type and demonstrates how it eliminates most of the bias caused by the classical Weibull estimator. It is shown that the coefficients in the Gringorten estimator are the asymptotic values for infinite sample sizes, whereas the estimator is most often used for small sample sizes. The principles used by Gringorten are used to derive a new Consistent Linear Unbiased Estimator (CLUE) for the mean plotting positions for the Fisher Tippett Type 1, Exponential and Weibull distributions and for the associated standard deviations. Analytical and Bootstrap methods are used to calibrate the bias error in each of the estimators and to show that the CLUE are accurate to better than 1%.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1055-1057
• /
• 2004

This paper deals with a qualitative analysis of iron loss in Transverse Flux Linear Motor (TFLM). 3D equivalent magnetic circuit network method (EMCNM) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of an optional material. The results of iron loss analysis can be used as a criterion to decide the manufactural shape such as lamination or solid type core, skew position, etc.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.456-459
• /
• 2003

This paper deal with the biped walking stability by inverted pendulum type balancing joints. This model is hard to interpretation for the nonlinearity caused by upper direction movement then conventional model which have roll and prismatic joints. We can interpret this model by a linear approximation or interpolation method. This paper use a linear approximation method that can decide a movement of upper direction. Inverted pendulum type balancing joints have a advantage of less movement for keep stability and similar with human than conventional model and this model can be used for humanoid robot. We can see a stability of biped by ZMP(Zero Moment Point). Genetic algorithm is used for trajectory planning that is important for stable walking of biped.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1177-1179
• /
• 2005

This paper presents the characteristic analysis of slotless tubular type Linear DC Motor with Permanent Magnet excitation as variation of magnetic pole-pitch ratio. The stator armature winding of this motor is designed to wind at inner stator around the mover mounted with permanent magnet. First the practical model of this motor is made and its parameter is measured, after this simulation is carried out. Comparing the simulation results as variation of pole-pitch ratio, it can be seen that the reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a specially constrained environment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.277-280
• /
• 2008

Recently, a demand of nano/micro patterned polymer for display or biochip has been rising. Then many studies have been carried out. Nano/micro-embossing is a deformation process where the workpiece materials is heated to permit easier material flow and then forced over a planar patterned tool. In this work, the hot-emboss process is performed with different forming conditions; forming temperature, load, press hold time, to get the proper condition for linear pattern fabrication on plated-type polymers (PC). Replicated pattern depth increases in proportion to the forming temperature, load and time. Reduction of the workpiece thickness increases according to press hold time. In process of time, reduction ratio of workpiece thickness decreases because of surface area increment of the workpiece and pressure decline on it.

• Kyungpook Mathematical Journal
• /
• v.58 no.4
• /
• pp.733-746
• /
• 2018

The concept of f-statistical convergence which is, in fact, a generalization of statistical convergence, has been introduced recently by Aizpuru et al. (Quaest. Math. 37: 525-530, 2014). The main object of this paper is to prove an f-statistical analog of the classical Korovkin type approximation theorem of Boyanov and Veselinov. It is shown that the f-statistical analog is intermediate between the classical theorem and its statistical analog. As an application, we estimate the rate of f-statistical convergence of the sequence of positive linear operators defined from $C^*[0,{\infty})$ into itself.

• Communications for Statistical Applications and Methods
• /
• v.26 no.2
• /
• pp.91-102
• /
• 2019

In this paper, we propose a new estimation method based on a weighted linear regression framework to obtain some estimators for unknown parameters in a two-parameter Rayleigh distribution under a progressive Type-II censoring scheme. We also provide unbiased estimators of the location parameter and scale parameter which have a nuisance parameter, and an estimator based on a pivotal quantity which does not depend on the other parameter. The proposed weighted least square estimator (WLSE) of the location parameter is not dependent on the scale parameter. In addition, the WLSE of the scale parameter is not dependent on the location parameter. The results are compared with the maximum likelihood method and pivot-based estimation method. The assessments and comparisons are done using Monte Carlo simulations and real data analysis. The simulation results show that the estimators ${\hat{\mu}}_u({\hat{\theta}}_p)$ and ${\hat{\theta}}_p({\hat{\mu}}_u)$ are superior to the other estimators in terms of the mean squared error (MSE) and bias.

• Communications of the Korean Mathematical Society
• /
• v.37 no.1
• /
• pp.303-326
• /
• 2022

Our aim is to construct Hermite-type exponentially fitted interpolation formulas that use not only the pointwise values of an 𝜔-dependent function f but also the values of its first derivative at three unequally spaced nodes. The function f is of the form, f(x) = g₁(x) cos(𝜔x) + g₂(x) sin(𝜔x), x ∈ [a, b], where g₁ and g₂ are smooth enough to be well approximated by polynomials. To achieve such an aim, we first present Hermite-type exponentially fitted interpolation formulas I_N built on the foundation using N unequally spaced nodes. Then the coefficients of I_N are determined by solving a linear system, and some of the properties of these coefficients are obtained. When N is 2 or 3, some results are obtained with respect to the determinant of the coefficient matrix of the linear system which is associated with I_N. For N = 3, the errors for I_N are approached theoretically and they are compared numerically with the errors for other interpolation formulas.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.107-113
• /
• 2019

In this study, we examined the feasibility of considering the transverse edge effect of flat type linear induction motor as 2D finite element analysis (FEA) by changing the resistivity of secondary conductor. For this purpose, the 3D FEA analysis results were compared with the 2D FEA analysis results with the change of the resistivity of the secondary conductors. As a result, simply changing the resistivity could not accurately account for the transverse edge effect of LIM because of leakage components that could not be considered by 2D FEA.