• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.1685-1689
• /
• 2016

Physical wedges still can be used as missing tissue compensators or filters to alter the shape of isodose curves in a target volume to reach an optimal radiotherapy plan without creating a hotspot. The aim of this study was to investigate the dosimetric properties of physical wedges filters such as off-axis photon fluence, photon spectrum, output factor and half value layer. The photon beam quality of a 6 MV Primus Siemens modified by 150 and 450 physical wedges was studied with BEAMnrc Monte Carlo (MC) code. The calculated present depth dose and dose profile curves for open and wedged photon beam were in good agreement with the measurements. Increase of wedge angle increased the beam hardening and this effect was more pronounced at the heal region. Using such an accurate MC model to determine of wedge factors and implementation of it as a calculation algorithm in the future treatment planning systems is recommended.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.296-299
• /
• 2003

본 논문에서는 수중 음향 디지털 송수신기를 설계하고 DSP를 이용하여 구현하였으며 한국해양연구원 해양시스템안전연구소에서 보유하고 있는 무향수조 및 강원도 고성, 동해, 소양호 등에서 실험을 수행하였다. Quadrature phase shift keying (QPSK) 변조기술을 채택하였고, look-up table 기반의 효율적인 송신기 구조를 설계하였다. 13-symbols Barker code를 이용하여 에너지 검출 방식으로 프레임 동기를 획득하였고, FIR 필터 기반의 광대역 빔형성기, 적응 등화기 등과 같은 기저대역 디지털 신호처리 기법을 적용하였다. 광대역 빔형성기의 배열 센서 구조는 선형 등간격이며 4개의 센서를 이용하였다. 수중 음향 채널의 페이딩 특성을 극복하기 위해서 오류 정정 부호로써 1/2 길쌈부호화 방식을 채택하였으며 널리 사용되고 있는 Viterbi 복호기를 구현하였다. 무향수조 실험 및 실해역 실험을 통하여 설계한 디지털 송수신기 성능을 분석하였다.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.790-796
• /
• 2014

통신채널의 인식문제는 현재 이론적 부분과 실제 관점 부분의 문제점을 가지고 있다. 최근에 이 문제를 해결키 위해 제안된 기법들은 안테나 구조와 시간 오버샘플링에 의해 유도된 다이버시티를 이용하고 있다. 이 방법은 선형 제한조건을 가진 적응필터를 이용하고 있다. 본 논문에서는 값 분할에 근거한 기법이 제안되었다. 수신신호 상관행렬의 최소 단일값에 의한 단일벡터는 채널 임펄스 응답을 포함하며 상기 문제를 해결키 위한 적응 알고리즘을 보인다. 제안된 기법은 기존 기법의 성능보다 우수함을 알 수 있다.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.381-388
• /
• 2003

본 논문에서는 IED(Intelligent Electronic Devices)에서의 고조파 문제를 연구하였다. 최근 전력전자 기술의 급격한 발전으로 비선형부하에 의한 전력 품질의 왜곡이 심각해지고 있다. 연속적인 고조파 전류는 전련기기의 수명을 단축시키고 발열 문제가 발생하며 비정상적인 동작을 유발한다. 이러한 문제를 해결하기 위한 디지털 보호계전 시스템에서 전통적인 방법으로 전력을 계측하면 고조파의 영향을 고려할 수 없다. 이러한 문제를 해결하기 위하여 본 연구에서는 TMS320C32 DSP와 CPLD를 이용한 IED prototype을 구현하여 실험을 통해 성능을 확인하였다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1363-1371
• /
• 2017

In this paper, an improved Direct Power Control (DPC) algorithm is presented for grid connected three phase PWM rectifiers. The new DPC approach is based on two main tasks. First the optimization of the look-up table, which is well-known in conventional DPC, is outlined for selecting the optimum converter output voltage vectors. Secondly a very simple and effective method is used to directly calculate their duty cycles from the power errors. Therefore, the measured active and reactive powers are made to track their references using hysteresis controllers. Then two vectors are selected and applied during one control cycle to minimize both the active and reactive power ripples. The main advantages of this method are that there is no need of linear current controllers, coordinates transformations or modulators. In addition, the control strategy is able to operate at constant switching frequencies to ease the design of the power converter and the AC harmonic filter. The control exhibits a good steady state performance and improves the dynamic response without any overshoot in the line current. Theoretical principles of the proposed method are discussed. Both simulation and experimental results are presented to verify the performance and effectiveness of this control scheme.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.755-764
• /
• 1996

A multispectral imaging system with selected wavelength optical filter was demonstrated feasible for food safety inspection. Intensified multispectral images of carcasses were obtained with visible/near-infrared optical filters(542-847 nm wavelengths) and analyzed. The analysis of textural features based on co-occurrence matrices was conducted to determine the feasibility of a multispectral image analyses for discriminating unwholesome poultry carcasses from wholesome carcasses. The mean angular second moment of the wholesome carcasses scanned at 542 nm wavelength was lower than that of septicemic (P$\leq$0.0005) and cadaver(P$\leq$0.0005) carcasses. On the other hand, for the carcasses scanned at 700nm wavelength , the feature values of septicemic and cadaver carcasses were significantly (P$\leq$0.0005) different from wholesome carcasses. The discriminant functions for classifying poultry carcasses into three classes (wholesome, septicemic , cadaver) were developed using linear and quadr tic covariance matrix analysis method. The accuracy of the quadratic discriminant models, expressed in rates of correct classification, were over 90% for the classification of wholesome, septicemic, and cadaver carcasses when textural features from the spectral images scanned at the wavelength of 542 and 700nm were utilized.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.70-75
• /
• 1998

The comparison of Topex/Poseidon sea surface heights and Tide Gauge sea levels was studied in the South Indian Ocean after Topex/Poseidon mission of about 3 years (11- 121 cycles) from January 1993 through December 1995. The user's handbook (AVISO) for sea surface height data process was used in this study Topex/Poseidon sea suface heights ($\zeta$$^{T/P}$), satellite data at the point which is very closed to Tide Gauge station, were chosen in the same latitude of Tide Gauge station. These data were re-sampled by a linear interpolation with the interval of about 10 days, and were filtered by the gaussian filter with a 60 day-window. Tide Gauge sea levels ($\zeta$$^{Argos}$, $\zeta$$^{In-situ}$ and $\zeta$$^{Model}$), were also treated with the same method as satellite data. The main conclusions obtained from the root-mean-square and correlation coefficient were as follows: 1) to Produce Tide Gauge sea levels from bottom pressure, in-situ data of METEO-FRANCE showed very good values against to the model data of ECMWF and 2) to compare Topex/Poseidon sea surface heights of Tide Gauge sea levels, the results of the open sea areas were better than those of the coast and island areas.

• 자원환경지질
• /
• 제20권3호
• /
• pp.197-201
• /
• 1987

3층 구조 대지의 음수 유도분극 반응을 디지탈 선형 필터법으로 구하여 검토하였다. 음수의 유도분극 반응은 전기비저항 구조가 K니 Q형일 때 나타나며, K형 구조의 경우 Q형보다 더 뚜렷한 음수의 반응을 보여 준다. 이러한 구조일 때, 유도분극 계수는 전기비저항 분포와 전극 배치의 함수로 주어지며, 표층의 계수만이 음수의 값을 가질 수 있다. 따라서 음수의 유도분극 반응은 표층이 분극성일 때 생길 가능성이 있으며, 그 외의 층의 분극성은 오히려 음수의 유도분극 반응을 줄이는 역할을 한다.

• 대한후두음성언어의학회지
• /
• 제13권1호
• /
• pp.52-58
• /
• 2002

The pitch range of the human voice is variable, extending from chest register to falsetto. Although numerous studies have investigated after laryngeal mechanism description of registers, systematic and objective studies were lack. The purpose of this study was to analyze and compare head register with chest register of singers acoustically. Fifteen healthy tenor major students were selected. Fifteen healthy untrained adults were the control group for this study. Long term average(LTA) power spectrum using the Fast Fourier transform(FFT) algorithm and Linear predictive coding (LPC) filter response were made during /a/ sustained in both head(G4, 392Hz) md chest registers (C3, 131Hz). Statistical analysis was performed using Mann-Whitney test. In the LTA power spectrum, head register of singer has increased level(energy gain) in the frequency band of 2.2-3.4kHz(p<0.01), and 7.5-8.4kHz(p<0.01, p<0.05). Chest register of singer has increased level in the frequency band of 2.2-3.1kHz(p<0.01), 7.8-8.4kHz(p<0.05) and around 9.6kHz(p<0.01). LTA power spectrum reveals a peak of acoustic energy around 2500Hz known as the singer's formant and another peak of acoustic energy around 8000Hz in singer's voice.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.