• ETRI Journal
• /
• 제44권2호
• /
• pp.260-273
• /
• 2022

This study presents a novel multilayer structure of parallel coupled-line bandpass filtercentered at 2.42 GHz with a fractional bandwidth value of approximately 19.4%. The designed filter can suppress harmonics with an appropriate frequency response by incorporating different techniques based on the multilayer technique. A combination of different techniques such as radial microstrip stubs and defected ground structure (DGS) and defected microstrip structure techniques are employed to suppress harmonics up to 5f₀. These techniques are used in two layers to suppress up to 5f₀. In addition, in this study, the effects of different parameters, such as the width of slot-line DGS, the angle of diagonal line slots in the upper layer, and the air gap between the two layers on the filter performance, are investigated. To verify the correct circuit operation, the designed filter is implemented and tested. The measurement results of the proposed filter are compared with the simulation results.

• 한국수자원학회논문집
• /
• 제41권7호
• /
• pp.653-667
• /
• 2008

본 연구는 변형수제 중 하나로서 "ㄱ" 모양을 갖는 L형 수제(L-type Groyne)에 대한 수리실험 연구이다. 연구 목적은 수제설계를 위한 기초자료인 수제주변(수로부, 수제역)의 흐름특성을 파악하는 것이다. 이를 위해 수리실험을 통하여 수제설계의 주요 수리특성인 주수로의 유속변화, 흐름중심선의 변화 및 흐름분리영역을 분석하였다. 본 연구에서 흐름중심선은 수로내의 최대유속이 발생되는 유선으로 정의하였으며 흐름분리영역은 본류영역인 주흐름과 수제영역인 재순환영역(recirculation zone)의 경계를 나타낸다. 5가지 수제 팔길이 조건에 대하여 유속을 변화시키면서 수리실험을 수행하였고, LSPIV(Large Scale Particle Image Velocimetry)기법을 적용하여 수제주변 흐름장을 측정 및 분석하였다. 실험결과 주흐름의 유속은 최대 1.5배 증가되는 것으로 나타났으며 수제 팔길이의 영향은 적었다. 흐름중심선의 폭은 수로폭의 $55{\sim}58%$ 구간으로 변화되었으며 흐름중심선과 흐름분리영역은 Froude 수에 큰 변화를 보이지 않는 것으로 나타났다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• 한국의학물리학회지:의학물리
• /
• 제30권1호
• /
• pp.14-21
• /
• 2019

Purpose: To report the initial experience of patient-specific quality assurance (pQA) for the wobbling and line-scanning proton therapy at Samsung Medical Center. Materials and Methods: The pQA results of 89 wobbling treatments with 227 fields and 44 line-scanning treatments with 118 fields were analyzed from December 2015 to June 2016. For the wobbling method, proton range and spread-out Bragg peak (SOBP) width were verified. For the line-scanning method, output and two-dimensional dose distribution at multiple depths were verified by gamma analysis with 3%/3 mm criterion. Results: The average range difference was -0.44 mm with a standard deviation (SD) of 1.64 mm and 0.1 mm with an SD of 0.53 mm for the small and middle wobbling radii, respectively. For the line-scanning method, the output difference was within ${\pm}3%$. The gamma passing rates were over 95% with 3%/3 mm criterion for all depths. Conclusions: For the wobbling method, proton range and SOBP width were within the tolerance levels. For the line-scanning method, the output and two-dimensional dose distribution showed excellent agreement with the treatment plans.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.924-931
• /
• 2002

본 논문에서, 기존의 λ/4 전원 전송선로의 접지면에 아령 모양의 DGS(Defected Ground Structure)를 추가한 새로운 형태의 λ/4 전원 전송선로를 제안하였다. DGS A/4 전원 전송선로는 높은 특성 임피던스 값을 유지하면서, 기존의 전원 선로보다 폭은 더 넓어지고 길이는 더 짧아졌다. 제안된 전원 선로가 신호 전송선로에 부착되면, 2차 고조파 성분뿐만 아니라 3차 고조파 성분 역시 감쇄시킬 수 있다. 증폭기에서 고조파 감쇄 특성을 갖는다면, 효율과 선형성이 개선되어진다. 제안된 전원 선로는 IMT-2000 기지국 송신 대역 전력 증폭기에 적용하였다. 본 논문에서는 제안된 새로운 DGS 구조 λ/4 전원 선로를 이용한 전력 증폭기의 검증을 위해, DGS 시뮬레이션과 실험 결과들을 제시하였다. 실험 결과, 기존의 구조에 비해 3차 고조파 성분은 26.5 dB 감쇄되었고, 효율은 약 9.1% 정도 향상되었으며, 3차 혼변조 왜곡 특성은 4.5 dB 개선되었다.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.347-354
• /
• 2012

Using a single-line pulsed laser beam is well known as a useful noncontact method to generate a directional surface acoustic wave. In this method, different laser beam energy profiles produce different waveforms and frequency characteristics. In this paper, we considered two typical kinds of laser beam energy profiles, Gaussian and square-like, to find out a difference in the frequency characteristics. To achieve this, mathematical models were proposed first for Gaussian laser beam profile and square-like respectively, both of which depended on the laser beam width. To verify the theoretical models, experimental setups with a cylindrical lens and a line-slit mask were respectively designed to produce a line laser beam with Gaussian spatial energy profile and square-like. The frequency responses of the theoretical models showed good agreement with experimental results in terms of the existence of harmonic frequency components and the shift of the first peak frequencies to low.

• 천문학회보
• /
• 제35권2호
• /
• pp.73.1-73.1
• /
• 2010

Using the spectroscopic data secured with the Hamilton Echelle Spectrograph attached to a 3-m telescope at the Lick Observatory, we derived the expansion velocities from various line profiles in the 3600 $\AA$ to 10,000 $\AA$ based on the full width at half maximum and double peak of the high dispersion line profiles. The symmetrical shapes of the permitted line profiles indicate that the permitted line zone is symmetrical e.g., a spherical shell or bipolar + torus structures, which might be evidence of relatively recent ejection from the central star. Most other stronger forbidden lines might be coming from a main shell which appears as a bilateral symmetrical morphology, seen in HST and other ground-based telescopic images. The overall expansion velocities of this main shell structure that are responsible for most lines, seem to show the Hubble type expansion, i.e., accelerating shell. The faster expansion velocities of the permitted OII, NII, NIII and perhaps CII lines that do not suit to the Hubble type expansion, imply the existence of a somewhat smaller inner shell inside the outer main shell. We conclude that the nebular shell consists of a swiftly expanding inner shell and an outer normal shell excited by a central star of about 55,000K. The former compact zone appears to be responsible for the permitted C, N, and O lines while the latter extended shell appears to be responsible for H, He, and forbidden lines. We present some evidence that NGC 6833 be a member of the Galactic halo.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.93-101
• /
• 2015

This study aims to suggest the patternmaking method of men's slim-fit six-panel jacket sloper in their 30's. The researcher collected four kinds of existing slopers and carried out appearance evaluations twice. The researcher's sloper was developed by modifying and supplementing the existing sloper with high scores from the evaluations. The results are as follows: first, when comparing the four kinds of existing slopers, dimensions and patternmaking methods of 18 areas, especially width of back chest and side chest, were varied according to the existing slopers. Second, the researcher's sloper had excellent scores in the appearance evaluations such as placements of side line on the chest, waist, hip line, measurement in dimension from the center back hip line and from waist line, and appearance of neck line. Third, the suggested sloper are as follows: the ease on the chest is 10.5 cm, 8~10 cm extends for the jacket length, the measure in dimension from the back waist is 2.2 cm, dart intake at the back side is 4 cm, dart intake at the front side is 1.5~2 cm, and dart intake at the front waist is 1 cm. This suggested six-panel jacket sloper is expected to be useful for the various slim-fit jacket designs which have the side panels.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.69-75
• /
• 2001

후막광식각 기술은 스크린 인쇄 등의 일반적 후막공정에 노광 및 현상등의 리소그라피 공정 을 접목시킨 새로운 기술이다. 그린시트를 적층한 후 감광성 Ag 페이스트를 도포하고, 패턴을 노광, 현상, 동시소성하여 스크린 인쇄법으로는 어려운 25 $\mu\textrm{m}$ 선폭과 25 $\mu\textrm{m}$ 선간공백을 구현하였다. 알루미나 기판을 사용하였을 경우에도 유사한 방법으로 20 $\mu\textrm{m}$에 가까운 선폭이 구현 가능하였으며, 노광량과 현상시간이 미세라인 형성에 있어서 가장 중요한 공정변수임을 확인하였다. 또한, 광식각 기술을 이용하여 정밀도가 높고 고주파 대역에서 전송특성이 우수한 microstrip 전송선로와 series gap 공진기를 제작하여, 이로부터 기판의 유전률 및 유전손실을 계산하였다.

• 복식
• /
• 제56권4호
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.