• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.31-39
• /
• 2016

We investigate an internal flow pattern of an evaporating droplet where the contact line non-uniformly recedes. By using tomographic Particle Image Velocimetry, we observe a three-dimensional azimuthal vortex pair that is maintained until the droplet is completely dried. The non-uniformly receding contact line motion breaks the flow symmetry. Finally, a simplified scaling model presents that the mechanical stress along the contact line is proportional to the vorticity magnitude, which is validated by the experimental results.

• 대한전자공학회논문지SP
• /
• 제38권4호
• /
• pp.87-87
• /
• 2001

일반화 대칭 변환 (generalized symmetry transform, GST)은 주어진 영상에서 사전 분할이 없이 국부성과 반사 대칭성을 결합하여 대칭을 측정하고 관심 영역을 추출한다. GST의 거리 가중치 함수에서 국부적인 대칭성이 반영되며 이 함수의 표준 편차 u에 의해 GST의 수행 범위가 조절된다. 넓은 관심영역을 추출하기 위해 반지름 r이 큰 검색영역 내에서의 대칭성이 추출될 필요가 있다. 이에 따라서 GST의 수행시간은 r에 따라 2차적으로 증가하게 된 본 논문에서는 이를 개선하기 위해 선택적 방향 주의를 가지는 수정된 스캔라인 GST를 제안한다. 제안된 GST는 기존의 GST와 유사한 대칭 특성을 추출하지만 선택적 방향의 기울기만을 고려한 스캔라인 위의 에지 화소쌍에서 GST를 수행함으로써 r에 따라서 이의 수행시간이 선형적으로 증가된다 특히 r이 큰 경우에 선택적 방향에 대해서만 적용하면 기존의 GST의 계산량이 비대해지는 단점을 보완해 줄 수 있다. 제안된 GST가 기존의 GST보다 시간적으로 효과적이며 유용하다는 것이 여러 종류의 영상에 대한 실험으로 확인되었다.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.469-475
• /
• 2010

This paper presents a method of classifying discolored defects of metal pads using geometric texture for AFVI (Automated Final Vision Inspection) systems. In PCB manufacturing process, the metal pads on PCB can be oxidized and discolored partly due to various environmental factors. Nowadays the discolored defects are manually detected and rejected from the process. This paper proposes an efficient geometric texture feature, SUTF (Symmetry and Uniformity Texture Feature) based on the symmetric and uniform textural characteristics of the surface of circular metal pads for automating AFVI systems. In practical experiments with real samples acquired from a production line, 30 discolored images and 1232 roughness images are tested. The experimental results demonstrate that the proposed method using SUTFs provides better performance compared to Gabor feature with 0% FNR (False Negative Rate) and 1.46% FPR (False Positive Rate). The performance of the proposed method shows its applicability in the real manufacturing systems.

• 산업기술연구
• /
• 제1권
• /
• pp.39-45
• /
• 1981

The typical characteristic shape of the Koryo inlaid celadon Maebyong was reviewed and the symmetry of S curve was analyzed by the method of geometric basis. The contours of Maebyongs sampled were drawn and divided with geometric rectangular proportion. The analytical results showed the static and dynamic symmetric of the vase and the ratios of height and base of the rectangles established for the analysis of their shapes were almost 1:1, 1:${\sqrt{2}}$ and 3:5(known as the Golden Ratio). The excellent beauty of the curve was principally caused by the balanced and harmonius division of the proportional rectangles. The contour line was developed along with the logarithmic spiral modified and introduced lately into the shape of Yi dynasty's liquor bottle.

• 지구물리와물리탐사
• /
• 제25권1호
• /
• pp.44-49
• /
• 2022

이 논문에서는 선형 이상체에 대한 벡터 중력과 중력 변화율 텐서 반응식을 유도하였다. 축대칭성을 가지는 이상체를 멀리서 관측하면 선형 이상체로 근사가 가능하므로 선형 이상체에 대한 중력 및 중력 변화율 해석해가 필요하다. 선형 이상체에 대한 중력 퍼텐셜을 1차원 적분식으로 정의하고 이를 직교 좌표계에서 미분하여 벡터 중력을 유도한다. 중력 변화율 텐서 반응식은 벡터 중력을 직교 좌표계에서 한번 더 미분하여 유도한다.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.81-85
• /
• 2001

Uniformity of critical currents of YBa$_2$Cu$_3$O$_{7}$ step-edge Josephson junctions on SrTiO$_3$(100) substrates have been studied at various step-line angles. 15 identical junctions were made in series on each substrate that has a long straight step-edge line. Step-line angles studied were 0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, and 45$^{\circ}$with respect to the crystal major axes of the substrate. Scattering of junction critical currents among the junctions on the same substrate increased with the step-line angle. Current-voltage curves showed standard resistively-shunted-junction (RSJ) characteristics in most of the 0$^{\circ}$junctions. However, the number of junctions showing RSJ behavior decreased with increasing step-line angle. Variations of detailed microstructure of the step-edge among junctions, which are coupled with the d-wave symmetry of YBa$_2$Cu$_3$O$_{7}$, are believed to be the main cause for the nonuniformity in the critical current.ent.

• Archives of Plastic Surgery
• /
• 제46권2호
• /
• pp.122-128
• /
• 2019

Background The masseter nerve is a useful donor nerve for reconstruction in patients with established facial palsy, with numerous advantages including low morbidity, a strong motor impulse, high reliability, and fast reinnervation. In this study, we assessed the results of masseter nerve-innervated free gracilis muscle transfer in established facial palsy patients. Methods Ten patients with facial palsy who received treatment from January 2015 to January 2017 were enrolled in this study. Three patients received masseter nerve-only free gracilis transfer, and seven received double-innervated free gracilis transfer (masseter nerve and a cross-face nerve graft). Patients were evaluated using the Facial Assessment by Computer Evaluation software (FACEgram) to quantify oral commissure excursion and symmetry at rest and when smiling after muscle transfer. Results The mean time between surgery and initial movement was roughly 167.7 days. A statistically significant increase in excursion at rest and when smiling was seen after muscle transfer. There was a significant increase in the distance of oral commissure excursion at rest and when smiling. A statistically significant increase was observed in symmetry when smiling. Terzis' functional and aesthetic grading scores showed significant improvements postoperatively. Conclusions Masseter nerve innervation is a good option with many uses in in established facial palsy patients. For some conditions, it is the first-line treatment. Free gracilis muscle transfer using the masseter nerve has excellent results with good symmetry and an effective degree of recovery.

• 대한치과교정학회지
• /
• 제26권2호
• /
• pp.197-204
• /
• 1996

이 연구는 악안면 영역의 심미적 개선에 필요한 미소의 형태에 대한 기준을 설정하기 위하여 시행하였다. 성인 정상교합자 62명(남자;30명, 평균연령;22.7세, 여자;32명, 평균연령;21.8세)을 대상으로 안정위시와 미소시의 얼굴 정면 사진을 촬영하였고, 미소시 입술의 형태변화, 그리고 입술과 치아와의 관계를 계측, 분석하였다. 이 연구로 부터 얻어진 결과는 다음과 같다. 1. 하순 상연의 만곡과 상악 절단연과의 평행관계인 smile line ratio는 0.09이었고, buccal corridor ratio는 0.63, smile symmetry ratio는 0.96이었다. 2. 미소시 양 구각주 간의 거리는 안정위시 구각부 간 거리의 1.31배였으며, 얼굴 폭의 0.48배였다. 3. 미소시 상순의 수직길이는 안정위시 길이의 0.69배였고, 하순의 수직길이는 안저위시 길이의 0.96배였다. 4. 상악 전치의 노출량은 9.96mm이었고, 상악 전치의 노출은 미소시 상순의 수직길이의 변화율이 었고, 미소시 구각부 길이의 비, buccal corridor ratio등과 관계 깊었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1990-1993
• /
• 2003

In this paper, we propose a technique for automatic spinal deformity detection from $moir\acute{e}$ topographic images. Normally the $moir\acute{e}$ stripes show symmetry as a human body is almost symmetric. According to the progress of the deformity of a spine, asymmetry becomes larger. Numerical representation of the degree of asymmetry is therefore useful in evaluating the deformity. First, displacement of local centroids and difference of gray values are evaluated statistically between the left- and the right-hand side regions of the $moir\acute{e}$ images with respect to the extracted middle line. We classify the moire images into two categories i.e., normal and abnormal cases from the features, employing discriminant analysis. An experiment was performed employing 1,200 $moir\acute{e}$ images and 85% of the images were classified correctly.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.293-298
• /
• 2005

We calculate the coordinates of an axisymmetric nozzle with a central body. This nozzle ensures a transonic flow with a plane sound surface, which is orthogonal to the symmetry axis and has a wall kink at the sonic point, The Chaplygin transformation in the subsonic part of the flow leads the Dirichlet problem for a system of nonlinear equations. The definition domain of the solution in the velocity-hodograph plane is taken as a rectangle. This enables one to obtain the nozzle with a monotonic distribution of velocity along its subsonic part. In the nonlinear differential equation, the linear Chaplygin operator for plane flows is separated, which allows the iterative calculation of the solution. The supersonic part of the nozzle is calculated under the assumption that the flow at the nozzle exit is uniform and parallel to the symmetry axis; i.e., the supersonic jet outflows to the submerged space with the same pressure. The calculation is performed by the characteristic method. The exact solution of Tricomi equation for near-sonic flows with the straight sonic line is used to 'move away' the sound plane. The velocity distribution alone the supersonic part of the nozzle is also monotonic, which ensures the absence of the boundary-layer separation and, therefore, the adequacy of the ideal-gas model. calculations show that the flow in the supersonic part of the nozzle is continuous (compression shocks are absent)