• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.385-397
• /
• 2016

Scaffolds are essential in bone tissue engineering, as they provide support to cells and growth factors necessary to regenerate tissue. In addition, they meet the mechanical function of the bone while it regenerates. Currently, the multiple methods for designing and manufacturing scaffolds are based on regular structures from a unit cell that repeats in a given domain. However, these methods do not resemble the actual structure of the trabecular bone which may work against osseous tissue regeneration. To explore the design of porous structures with similar mechanical properties to native bone, a geometric generation scheme from a reaction-diffusion model and its manufacturing via a material jetting system is proposed. This article presents the methodology used, the geometric characteristics and the modulus of elasticity of the scaffolds designed and manufactured. The method proposed shows its potential to generate structures that allow to control the basic scaffold properties for bone tissue engineering such as the width of the channels and porosity. The mechanical properties of our scaffolds are similar to trabecular tissue present in vertebrae and tibia bones. Tests on the manufactured scaffolds show that it is necessary to consider the orientation of the object relative to the printing system because the channel geometry, mechanical properties and roughness are heavily influenced by the position of the surface analyzed with respect to the printing axis. A possible line for future work may be the establishment of a set of guidelines to consider the effects of manufacturing processes in designing stages.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.244-260
• /
• 2018

Issues in the electrical characterization of semiconducting photoanodes in a photoelectrochemical (PEC) cell, such as the cell geometry dependence, scan rate dependence in DC measurements, and the frequency dependence in AC measurements, are addressed, using the example of a $TiO_2$ photoanode. Contrary to conventional constant phase element (CPE) modeling, the capacitive behavior associated with Mott-Schottky (MS) response was successfully modeled by a Havriliak-Negami (HN) capacitance function-which allowed the determination of frequency-independent Schottky capacitance parameters to be explained by a trapping mechanism. Additional polarization can be successfully described by the parallel connection of a Bisquert transmission line (TL) model for the diffusion-recombination process in the nanostructured $TiO_2$ electrode. Instead of shunt CPEs generally employed for the non-ideal TL feature, TL models with ideal shunt capacitors can describe the experimental data in the presence of an infinite-length Warburg element as internal interfacial impedance - a characteristic suggested to be a generic feature of many electrochemical cells. Fully parametrized impedance spectra finally allow in-depth physicochemical interpretations.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.18-25
• /
• 2002

One of the most serious concern in nuclear power plant piping maintenance is thickness reduction due to flow-accelerated corrosion (FAC). Since the FAC occurs under specific conditions of pH, dissolved oxygen, temperature, flow velocity, steam quality of the fluid and materials and geometry of the piping, a systematic approach is required for managing the FAC problem. In this study, construction of a secondary piping database, analyzing the FAC rate using the database and predicting the residual life was performed for a domestic CANDU nuclear power plant. Also FAC mechanism and factors affecting FAC were reviewed. By showing a case study on analysis for a pipe line between a separator and a flash tank, a procedure for managing FAC problem is suggested. The procedure proposed in this paper can be widely applied to the secondary piping of other domestic nuclear polder plants.

• Journal of Educational Research in Mathematics
• /
• v.24 no.4
• /
• pp.607-622
• /
• 2014

The purpose of this paper is that it analyzes the historical development of the concept of trigonometric functions and discuss some didactical implications. The results of the study are as follows. First, the concept of trigonometric functions is developed from line segments measuring ratios to numbers representing the ratios. Geometry, arithmetic, algebra and analysis has been integrated in this process. Secondly, as a result of developing from practical calculation to theoretical function, periodicity is formalized, but 'trigonometry' is overlooked. Third, it must be taught trigonometry relationally and structurally by the principle of similarity. Fourth, the conceptual generalization of trigonometric functions must be recognized as epistemological obstacle, and it should be improved to emphasize the integration revealed in history. The results of these studies provide some useful suggestions to teaching and learning of trigonometry.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.107-113
• /
• 2016

In this paper, we suggest a design method of a wide-band Butler matrix working at 5.9 GHz for V2X communication antennas. Since V2X communication needs beam-forming and beam-steering antennas to make transportation systems, mobile comm platforms, saturated frequency-resources, and signal TX-and-RX smart, multi-functional, resolved, and efficient utmost, respectively, the proper Butler matrix and its radiating elements as a low-profile geometry are realized. The constitutive components of the basic Butler matrix of a narrow band are designed first. And then, it is extended to a wide-band version to make its frequency-shift less affected by the event of the antenna system being mounted on a car body. The beam-forming and beam-steering performance is presented as the common feature tagged along with the different bandwidths of the frequency responses as the comparison between the narrow- and wide-band cases.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.47-53
• /
• 2005

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verity the validity of the developed program the numerical calculations for Wigley hull and Series 60(C${_B}$=0.6) hull had been performed and the results obtained after the numerical calculations had been compared with the original hulls.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4321-4326
• /
• 2011

A new series of heteroleptic cyclometalated iridium(III) complexes has been synthesized and characterized by absorption, emission and cyclic voltammetry studies: $(pqx)_2Ir(acac)$ (1), $(dmpqx)_2Ir(acac)$ (2) and $(dfpqx)_2Ir(acac)$ (3) where pqx=2-phenylquinoxalinate, dmpqx=2-(2,4-dimethoxyphenyl)quinoxalinate, dfpqx=2-(2,4-difluorophenyl) quinoxalinate and acac=acetylacetonate anion. The reaction of excess acetylacetone with ${\mu}$-chloride-bridged dimeric iridium complex, $[(C\^N)_2Ir({\mu}-Cl)]_2$, gives a complex 1 and an unusual hydridoiridium(III) complex, $(pqx)IrH(acac)_2$ (4). The complex 1, 2 and 3 show their emissions in an orangered region (${\lambda}_{PL,max}$ = 583-616 nm), and the emission maxima can be tuned by the change of substituent at phenyl ring of 2-phenylquinoxaline ligand. The phosphorescent line shape indicates that the emissions originate predominantly from $^3MLCT$ states with little admixture of ligand-based $^3({\pi}-{\pi}^*)$ excited states. The structures of complex 3 and 4 are additionally characterized by a single crystal X-ray diffraction method. The complex 3 shows a distorted octahedral geometry around iridium(III) metal ion. A strong trans influence of the phenyl ring is examined. In complex 4, there are two discrete molecules which are mirror images each other at the ratio of 1:1 in an unit cell. We propose that the phosphorescent complex 1, 2 and 3 are possible candidates for the phosphors in OLEDs applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1712-1718
• /
• 2013

This paper proposes a compact dual-band 3-way power divider that helps lowering the weight of a transceiver for the L-band or multi-purpose satellite communication. Instead of the multi stages or tapering which ends up with loss accumulation and size-growth, the non-linear dispersive phases from the metamaterial CRLH(composite right and left-handed) properties are obtained by the accurate formulation and implemented by the short transmission line segments. Firstly, the CRLH dual-band two-way unequal power divider and equal power divider are separately designed. And then, the input of the two-way equal power divider is plugged in the output port of the unequal one, and the entire geometry is slightly adjusted for the desirable performance. The circuit analysis and full-wave simulation are used to predict the frequency responses and validated by the measurement of the prototype. Besides, the size-reduction effect is addressed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1379-1386
• /
• 2005

For efficient welding it is necessary to maintain stability of the welding process and control the shape of the welding bead. The welding quality can be controlled by monitoring important parameters, such as, the Arc Voltage, Welding Current and Welding Speed during the welding process. Welding systems use either a vision sensor or an Arc sensor, both of which are unable to control these parameters directly. Therefore, it is difficult to obtain necessary bead geometry without automatically controlling the welding parameters through the sensors. In this paper we propose a novel approach using fuzzy logic and neural networks for improving welding qualify and maintaining the desired weld bead shape. Through experiments we demonstrate that the proposed system can be used for real welding processes. The results demonstrate that the system can efficiently estimate the weld bead shape and remove the welding detects.

• Journal of the Korean School Mathematics Society
• /
• v.16 no.4
• /
• pp.841-862
• /
• 2013

This study analyzed issues in the mathematics curriculum concerning the cognitive development of the vector and inner product concepts in the light of Tall's and Watson's research(Tall, 2004a; Tall, 2004b; Watson et al., 2003; Watson, 2002). Some suggestions in teaching the vector and inner product concepts were elaborated in the terms of these analyses. First, the position vector needs to be represented by an arrow on the coordinate system in order to introduce the component form of a vector represented by a directed line segment. Second, proofs of the vector operation law should be carried out by symbolic manipulations based on the algebraic concept of a vector in the symbolic world. Third, it is appropriate that the inner product is defined as $\vec{a}{\cdot}\vec{b}=a_1b_1+a_2b_2$ (when, $\vec{a}=(a_1,a_2)$, $\vec{b}=(b_1,b_2)$) when it comes to considering the meaning of the inner product relevant to vector space in the formal world. Cognitive growth of concepts of the vector and inner product can be properly induced through revising explanation methods about the concepts in the curriculum in the basis of the above suggestions.