• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.30-49
• /
• 2001

This paper considers a recent environment in the manufacturing process in which data in large amounts can be obtained on-line in real-time. Under this environment an on-line real-time Statistical Process Control (SPC) scheme equipped with detection of a process change, change-point estimation, and recognition of the change pattern is proposed. The proposed SPC scheme is composed of a Cusum chart, filtering methods and Akaike Information Criterion (AIC). We examine the performance of this scheme by Monte Carlo simulation and show its usefulness.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.948-953
• /
• 2002

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or a housing project near an existing railroad is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise on conventional line.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.294-300
• /
• 1996

In hydro-generator, a groundwall insulation of stator windings gradually deteriorates due to mechanical, thermal, electrical and environmental stresses. These stresses combine to result in loose windings, delamination of the stator insulation and/or electrical tracking of the endwinding, all of which can lead to stator insulation failures. Conventionally, off-line tests such as partial discharge measurement, DC/AC current and .DELTA.tan.delta. tests has been used for estimation of winding condition. However, off-line test requires large power supply and generator outage. In addition, major cause of insulation problems such as loose wedges and slot dischages may not be found with off-line diagnoses. This paper introduces the on-line partial discharge measurement techniques using frequency spectrum analyzer(FSA) for the generator stator windings. The experimental results from the UIAM #1 hydro-generator confirms a optimistic application of on-line generator diagnosis method as a reliable tool for evaluation of winding condition.

• 제어로봇시스템학회논문지
• /
• 제20권12호
• /
• pp.1284-1289
• /
• 2014

In this Paper, outdoor position estimation system was implemented using GPS (Global Positioning System) and INS (Inertial Navigation System). GPS position information has lots of errors by interference from obstacles and weather, the surrounding environment. To reduce these errors, multiple GPS system is used. Also, the Discrete Wavelet Transforms was applied to INS data for compensation of its error. In this paper, position estimation of the mobile robot in the straight line is conducted by EKF (Extended Kalman Filter). However, curve running position estimation is less accurate than straight line due to phase change in rotation. The curve is recognized through the rate of change in heading angle and the position estimation precision of the initial curve was improved by UPF (Unscented Particle Filter). In the case of UPF, if the number of particle is so many that big memory gets size is needed and processing speed becomes late. So, it only used the position estimation in the initial curve. Thereafter, the position of mobile robot in curve is estimated through switching from UPF to EKF again. Through the experiments, we verify the superiority of the system and make a conclusion.

• 한국통신학회논문지
• /
• 제37권2A호
• /
• pp.119-127
• /
• 2012

본 논문에서는 대역 확산 (spread spectrum) 방식의 실시간 위치 추적 시스템 (RTLS: real-time locating system)을 위한 초 분해능 지연 시간 추정 (super-resolution time delay estimation) 알고리즘을 개발하고 다중 경로 환경에서 성능을 분석한다. 기존의 코릴레이션 방식은 주변에 장애물이 없는 line-of-sight (LOS) 환경에서는 비교적 정확한 지연 시간 추정이 가능하나 지연 시간의 차이가 한 칩 이내인 근접 다중 경로 환경에서는 성능이 급격히 저하되는 문제점이 있다. 따라서 본 논문에서는 도래각 추정에 이용되는 MUSIC 알고리즘을 이용하여 근접 다중 경로 환경에서도 신호의 지연 시간을 추정할 수 있는 초 분해능 지연 시간 추정 알고리즘을 개발하고 이를 ISO/IEC 24730-2.1 RTLS 시스템에 적용하여 성능을 분석한다.

• 전자공학회논문지SC
• /
• 제45권3호
• /
• pp.20-31
• /
• 2008

본 논문에서는 단일 카메라를 이용하여 영상 내에 존재하는 객체의 3차원 공간 상에서의 위치 및 높이를 추출하기 위한 기법을 제안한다. 본 논문에서 제안하는 방법은 영상으로 사영된 3차원 장면(scene)에 대한 기준 좌표계를 마커(marker)를 이용해서 설정한 다음, 대상 물체의 2차원 영상을 기준 좌표계로 직접 역사영(back-projection) 시킴으로써 대상 물체에 대한 3차원 공간에서의 위치 및 높이를 계산한다. 그리고 부정확한 카메라 교정으로 인하여 발생하는 역사영 오차를 마커의 기하학 정보를 이용해서 보정한다. 제안된 방법은 기존의 방법에서 주로 이용되던 소실점(vanishing point) 및 소실선(vanishing line) 등을 이용하지 않으며, 3차원 공간 내에서의 객체의 높이 및 위치의 동시 추정이 가능한 장점이 있다. 또한 단일 카메라만을 이용하여 필요한 위치 및 높이 정보를 추출하기 때문에 다중 카메라를 이용한 기법에서 발생할 수 있는 3차원 좌표계 상에서의 대응점의 모호성, 다수의 카메라를 정확히 교정시켜야 하는 어려움 등의 문제가 발생하지 않는다. 실험 결과를 통하여 제안된 기법의 정확도 및 안정성을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.376-383
• /
• 2012

A number of scientific researches are currently being conducted on the potential health hazards of power frequency electric and magnetic field (EMF). There exists a non-objective and psychological belief that they are harmful, although no scientific and objective proof of such exists. This possible health risk from ELF magnetic field (MF) exposure, especially for children under 17 years of age, is currently one of Korea's most highly contested social issues. Therefore, to assess the magnetic field exposure levels of those children in their general living environments, the personal MF exposure levels of 436 subjects were measured for about 6 years using government funding. Using the measured database, estimation formulas were developed to predict personal MF exposure levels. These formulas can serve as valuable tools in estimating 24-hour personal MF exposure levels without directly measuring the exposure. Three types of estimation formulas were developed by applying evolutionary computation methods such as genetic algorithm (GA) and genetic programming (GP). After tuning the database, the final three formulas with the smallest estimation error were selected, where the target estimation error was approximately 0.03 ${\mu}T$. The seven parameters of each of these three formulas are gender (G), age (A), house type (H), house size (HS), distance between the subject's residence and a power line (RD), power line voltage class (KV), and the usage conditions of electric appliances (RULE).

• 한국측량학회지
• /
• 제38권6호
• /
• pp.543-551
• /
• 2020

본 논문에서는 레이더를 이용한 표적 길이 추정 정확도를 향상시키기 위한 방법에 관해 소개한다. 레이더 수신신호를 통해 만들어지는 고해상도 거리측면도(HRRP: High Resolution Range Profile)은 표적의 1차원적인 산란 특성을 나타내며, HRRP에서의 피크(peak)는 전자기파를 강하게 산란시키는 산란점(scattering center)을 의미한다. 추출된 산란점을 이용하여 레이더 가시선 방향(RLOS: Radar Line of Sight)의 길이인 표적 종방향 거리(downrange) 길이를 추정하며, 표적과 레이더 가시선 방향이 이루는 각도를 통해 표적의 실제 길이를 추정한다. 길이 추정의 정확도를 향상시키기 위해, HRRP를 이용하는 방법보다 정확하게 산란점을 추출하기 위한 방법인 매개변수 추정방법(parametric estimation method)을 이용할 수 있다. 매개변수 추정방법은 산란점 개수가 결정된 후에 적용되며, 따라서 산란점 개수 추정의 정확도에 크게 영향을 받는다. 본 논문에서는 레이더를 통한 표적 길이 추정 정확도를 향상시키기 위해, 정보 이론적 판단 기준에 바탕을 둔 신호원 수 추정방법인 AIC (Akaike Information Criteria), MDL (Minimum Descriptive Length), GLE (Gerschgorin Likelihood Estimators)방법들을 이용하여 산란점 개수를 추정하였다. 매개변수 추정방법으로 ESPRIT기법을 이용하여, 간단한 표적 캐드 모델에 대한 길이 추정 시뮬레이션을 수행하였으며, GLE방법이 산란점 개수 추정과 표적 길이 추정에 우수한 성능을 보임을 확인하였다.

• 지질공학
• /
• 제24권2호
• /
• pp.171-178
• /
• 2014

In seismic reflection data processing, the crossdip correction effectively focuses the stacking energy near the sharp bends of a crooked survey line. Additionally, approximate 3-D information on the reflector (e.g., true crossdip angle and lateral continuity) are locally investigated as a by-product of the crossdip correction procedure. Improvement of the signal-to-noise ratio and estimation of reflector crossdip attitude are tested, in terms of both common midpoint bin direction and processing-line type, using synthetic seismic reflection data. To effectively image the reflection energy near bends in seismic survey lines, straight-line binning is preferred to slalom-line binning.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.213-216
• /
• 2006

During the last decade several different methods have been proposed for the estimation of thermal deformations in the line heating process. These are mainly based on the assumption of residual strains in the heat-affected zone or simulated relations between heating conditions and residual deformations. However these results were restricted in the application from the too simplified heating conditions or the shortage of the data. The purpose of this paper is to develop a simulator of thermal deformation in the line heating using the artificial neural network. Two neural network predicting the maximum temperature and deformations at the heating line are studied. Deformation data from the line heating experiments are used for learning data for the network. It was observed that thermal deformation predicted by the neural network correlate well with the experimental result.