• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.128-135
• /
• 2004

This paper proposes a phase measurement algorithm which is based on the recursive implementation of sliding-DFT. The algorithm is designed to have a robust behavior against the erroneous factors of frequency drift, additive noise, and twiddle factor approximation. The size of phase error caused by the finite wordlength implementation of DFT twiddle factors is shown significantly lower than that of magnitude error. The drastic reduction of the phase error is achieved by the exploitation of the quadruplet symmetry characteristics of the approximated twiddle factors in the complex plane. Four channel power-line phase measurement system is also designed and implemented based on the time-multiplexed sharing architecture of the proposed algorithm. The operation of the developed system is also verified by the experiment performed under the test environment implemented with the multi-channel function generator and the on-line interfaced host processor system. The proposed algorithm's features of phase measurement accuracy and its robustness against the finite wordlength effects can provide a significant impact especially for the ASIC or microprocessor based embedded system applications where the enhanced processing speed and implementation simplicity are crucial design considerations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.170-178
• /
• 2010

In this paper, we propose the modeling of the power/ground plane which includes complex dielectric permittivity and loss tangent for the power/ground coupled noise. In order to estimate the effects of the dielectric substrate for the coupled noise, we used full-wave simulators, HFSS(High Frequency Structure Simulation) and MWS(MicroWave Studio). The simulated results for the commercial substrates are compared with the measured values. TLM(Transmission Line Method) was used for the calculation of power plane impedance using Debye model which depicts the dielectric loss of PCB. Finally, impedance from proposed circuit model showed very good coincidence to the measured data.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.8
• /
• pp.579-587
• /
• 1988

Conventional methods of automatic recognition of Korean characters consist of the thinning processing, the segmentation of connected fundamental phonemes and the recognition of each fundamental character. These methods, however require the thinning processing which is complex and time consuming. Also several noise components make worse effects on the recognition of characters than in the case of no thinning. This paper describes the extraction method of the feature components of Korean fundamental characters of the Gothic Korean letter without the thinning. We regard line-components of the contour which describes the character's external boundary as the feature-components. The line-component includes the directional code, the length and the start point in the image. Each fundamental character is represented by the string of directional codes. Therefore the recognition process is only the string pattern matching. We use the Gothic-hangul in the experiment. The ecognition rate is 92%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.663-669
• /
• 2012

To solve the energy problem and finding new growth engines, interest for the smart grid is increasing and related technologies are making great efforts to secure in the world. AMI (Advanced Metering Infrastructure) Among them is the first to be constructed and getting attention as a key component of smart grid. A fusion of various technologies in technology development and demonstration is underway on Jeju Island Smart Grid Demonstration Complex in Korea, and focusing on broadband power line communication technology infrastructure is actively underway in Korea Electric Power Corporation. AMI system using power line communication technology without building a separate communication lines are available for power supply lines, but communication is impossible in occurs because admission to the power company or the ideal infrastructure for communication is not considered. In this paper, we analyze the requirements to build AMI system using Binary CDMA and powerline communications technology, and design the basic communication protocol based on Binary CDMA, implement network management and relay feature. By doing so, ways to apply Ad-hoc Binary CDMA indigenous technology to the AMI system were derived, and could build a system to make use of Wired (PLC) and wireless (Binary CDMA) simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.982-989
• /
• 2013

Omni-directional antennas of UHF-Band are located on the top and bottom side of the Smart UAV in order to connect a link always. Therefore one of each antennas should be connected to a ground antenna. Because the communication link of the omni-directional antennas is influenced by the objectives around aircraft, the clearance of LOS(Line of Sight) should be achieved in order to avoid a loss of link. In this paper, the analysis results on the influence of the complex objectives placed around the antenna on the communication link are presented according to the change of attitude angles. The best positions of antennas are selected based on the electromagnetic analysis using XGTD tool which supports the modeling of antenna pattern. The flight tests of the Smart UAV were successfully performed with the selected antenna position.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.317-326
• /
• 1995

The purpose of this study was to establish a method for in vitro culture of C parvum isolated in Korea by determination of suitable cell model to complete development of this parasite. The result obtained were summerized as follows: 1. To determine the most suitable cell line, six types of cell line were examined by microscopy. All cell lines were infected with C parvum and showed the highest infection score in HmLu cells. 2. The staining methods including DMSO-modified acid-fast(A-F) stain, hematoxylin-eosin(H & E) stain and immunofluorescence antibody(IFA) stain were applied to examine the infection of C parvum in cell culture. These staining methods were possible to examine the infection of C parvum in cell culture. The most sensitive one was IFA staining technique. 3. Developmental stages of C parvum in HmLu cell were observed. After the initial 8 hour incubation period, some trophozoites were observed. The meronts and gametes were appeared at 24-48 hour post inoculation(PI), and oocysts were observed firstly at 48-72 hour PI. 4. In H & E stain, the parasite appeared as basophilic within parasitophorous vacuole membrane(PVM) and lying in cytoplasm at near the nucleus of the host cells. It was able to distinguish the type I, type II meronts and gametes. 5. In DMSO-modified acid-fast stain, specific stained parasites were appeared firstly after 48 hour PI. The parasites were showed with different degrees of staining bright red color within PVM. 6. The endogenous stages of parasites in HmLu cell recovered at 48, 96, 120 and 144 hour after inoculation were reacted with rabbit immunized serum in immunofluorescence antibody and avidin-biotin complex peroxidase staining technique.

• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.131-142
• /
• 2016

Recently, a variety of methodologies based on the use of educational coding robots have been proposed and experimented in newly emerging korean educational coding markets. Due to imprecise movement accuracy of the existing coding robots, however, such robots are mainly used as a toy. Inspired by these observations, we developed a simple adjustment method during robot movements, which is based on the observation results of 6 line-tracking sensors: 3 sensors in the center of a robot and other 3 sensors at the front. These sensors help to determine whether the robot is in the right location and whether it rotates as expected. Through the well-designed experiments, we report the effectiveness of our proposed solution: the average distance error of 1.57cm and the average degree error of 2.38 degree before and after complex movements. In near future, we hope our method to be popularly used in various educational coding robot platforms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.25-36
• /
• 2015

The complex analysis of the pedigree records of Czech Landrace (CLA), Czech Large White-dam line (CLWd), Czech Large White-sire line (CLWs), Duroc (DC), and Pietrain (PN) was performed to determine trends of genetic diversity (GD), and to find the main sources of the GD loss. The total size of the pedigree was 132,365, 391,151, 32,913, 13,299, and 7,160 animals in CLA, CLWd, CLWs, DC, and PN, respectively. Animals born in the years 2011 through 2013 were assumed as the reference population. The average pedigree completeness index for one generation back was 95.9%, 97.4%, 91.2%, 89.8%, and 94.2% for appropriate breeds. Number of ancestors explaining 100% of gene pool was 186, 373, 125, 157, and 37 in CLA, CLWd, CLWs, DC, and PN, respectively. The relative proportion of inbred animals (58%, 58%, 54%, 47%, and 25%), the average inbreeding (2.7%, 1.4%, 2.5%, 3.6%, and 1.3%) and the average co-ancestry (3.1%, 1.6%, 3.3%, 4.2%, and 3.3%) were found over the past decade in analysed breeds. The expected inbreeding under random mating increased during the last 10 years in CLWs and PN and varied from 1.27% to 3.2%. The effective population size computed on the basis of inbreeding was 76, 74, 50, 35, and 83 in 2012 in CLA, CLWd, CLWs, DC, and PN, respectively. The shortest generation interval (1.45) was observed for CLWd in sire to son selection pathway. The longest generation interval obtained PN (1.95) in sire to daughter pathway. The average relative GD loss within last generation interval was 7.05%, 4.70%, 9.81%, 7.47%, and 10.46%, respectively. The relative proportion of GD loss due to genetic drift on total GD loss was 85.04%, 84.51%, 89.46%, 86.19%, and 83.68% in CLA, CLWd, CLWs, DC, and PN, respectively. All breeds were characterized by a high proportion of inbred animals, but the average inbreeding was low. The most vulnerable breeds to loss of GD are DC and PN. Therefore, a breeding program should be more oriented to prevent the increase of GD loss in these breeds.

• Korean Parent-Child Health Journal
• /
• v.4 no.1
• /
• pp.19-34
• /
• 2001

The childbearing process is not only a biological phenomenon of a woman who gives birth to a child but also a sociocultural phenomenon which is reflected on her value, belief in the sociocultural context according to social change and acculturation. The familial relation and sociocultural context in the multigravidas are more complex and intermingled than in the primigravidas. The purpose of this ethnographic research study was to explore the experience of identity from the first trimester of pregnancy to the third trimester of pregnancy in the Korean multigravidas and to understand deeply the perspectives of pregnant women reflected on Korean sociocultural values, beliefs, norms and familial culture. The participants of 10 pregnant women in Seoul, Korea were observed for 10 months from January to October 2000 and interviewed in their homes and comfortable place. Data analysis was accomplished 'line by line method' and significant concepts were classified according to themes, categories, and domains. The results of this study were as follows : The participants experienced 4 categorized subjects : understanding the oneself - mother to be, performing the dual role, drifting the emotion, and living disheartened during pregnancy. The participants were showed universality and diversity pattern in the self understanding process. The universal pattern were 'mother to be' showing maturation, life along family and priority on motherhood between being a mother and a woman. The diverse pattern were taking the dual role in working mothers having the higher self actualized value and personal identity rather than maternal identity, drifting emotion in resigned mothers, and living disheartened in mothers who have two daughters and no son. In conclusion, the Korean multigravidas experienced womanhood as well as motherhood through the self understanding process with familial connections during pregnancy. Therefore it is suggested that if the harmony and the balance between a mother and a woman is accomplished, the woman will lead a healthy and high quality of life. Also, this study sought to confirm the sociocultural factors affecting during pregnancy in the perspectives of the women with children. Therefore, the health care providers have to divert their attention from biomedical perspectives to biocultural perspectives integrating bio-psycho-sociocultural aspects of pregnant women in a clinical setting.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.229-239
• /
• 1992

This study was performed to define the adaptation patterns of each skeletal components to the flexures of cranial bases, using 91 males from the ages of 17 to 36 and 64 females from the ages of 16 to 34, without orthodontic or prosthetic treatment experiences and with pleasant profiles as subjects. The conclusions are as follow: 1. When considering the changes of flexure of cranial base (Ba-SE-FMN) in both sexes, changes in the anterior cranial base angle to the PM Vertical line (SE-FMN/PMV) were greater than the changes in the posterior cranial base angle to the PM Vertical line (Ba-SE/PMV). Subsequently the nasomaxillary complex showed antero-superior rotating effect as the cranial base angles were increased and postero-inferior rotating effect as they were decreased. 2. Horizontal mandibular angle (Ba-SE-Me) was increased in both sexes as cranial base angle increases (Ba-SE-FMN) and it decreased as the latter was decreases. There by indicating compensatory effects. 3. Maxillary angle (SE-FMN-A) was decreased in both sexes as cranial base angle (Ba-SE-FMN) increases and it increased as the latter was decreased. There by indicating compensatory effects. 4. Mandibular ramus angle to posterior cranial base was decreased in both sexes as cranial base angle increases. There by indicating compensatory effect to anteriorly displaced maxilla and the mandibular ramus angle was increased as the cranial base angle decreases. There by indicating compensatory effect to posteriorly displace maxilla. 5. The length of posterior upper facial height was decreased in both sexes as the cranial base angle increases and it increased as the latter was decreased.