• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1333-1337
• /
• 2003

The present headway on KNR lines varies from 6 to 10 minutes. Therefore, KNR would like to reduce the headway of all the lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. In Korea, thanks to the operation of the High Speed Line in 2004, the bottleneck phenomenon will occur only in a few sections such as Seoul-Siheung, which will be the common route between KTX and conventional trains. Therefore, we will analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS trackside and ETRMS/ETCS on-board system within the Seoul-Siheung section.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1411-1421
• /
• 1995

A rigid visco-plastic finite element method has been developed for modeling superplastic forming processes. The optimum pressure-time relationship for a target strain rate and thickness distributions was predicted using two-node line element based on membrane approximation for plane strain and axisymmetric condition. Analysis of superplastic forming was carried out using the developed program and the numerical results were compared to the values available in the literature for plane strain problems. For description of the contact between the dies and sheet, the direct projection method was applied to the complicated problem and the validity of the scheme was tested. Experiments for the various geometries such as hemisphere and cone were performed with the developed forming machine using the calculated optimum pressure-time curves. Comparison between analysis and experiments showed good agreement.

• 대한물리치료과학회지
• /
• 제13권1호
• /
• pp.21-27
• /
• 2006

The purpose of this study was to identify the above mentioned therapy on the reduction of functional leg length inequality, by the manipulation(Thonpson technique). In 8 patients who have been chronically ill with low back pain and functional leg length inequality, for past 12 weeks, we analyzed and observed the progress of symptom and sign on pelvis(femur head line level, ilium length, ilium rotation), using by X-ray. The results after 12 week treatment, compared with before treatment, were as follows : 1. The improved in femur head line in the manipulation after 12 week treatment was very significant(p<.01) 2. The improved in ilium length in the manipulation after 12 week treatment was very significant(p<.01) 3. The improved in ilium rotation in the manipulation after 12 week treatment was significant(p<.05).

• 전기학회논문지
• /
• 제57권3호
• /
• pp.527-535
• /
• 2008

Many signal processing techniques have been described in the literature for estimating amplitude, frequency and duration variables of the surface EMG signal detected during constant voluntary contractions. They have been used in different application areas for the non-invasive assessment of muscle function. The main purpose of our research is to compare the most frequently used algorithms for information extraction from surface EMG signals under varying conditions in terms of the different window lengths, muscle contraction levels, muscles and subjects. In particular we focus on the issue of estimating the slope and intercept to resolve an linear regression line with utilizing real SEMG signals which represents voluntary contractions during thirty seconds.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.811-825
• /
• 1998

An approximate line search is presented for dynamic response optimization with Augmented Lagrange Multiplier(ALM) method. This study empolys the approximate a augmented Lagrangian, which can improve the efficiency of the ALM method, while maintaining the global convergence of the ALM method. Although the approximate augmented Lagragian is composed of only the linearized cost and constraint functions, the quality of this approximation should be good since an approximate penalty term is found to have almost second-order accuracy near the optimum. Typical unconstrained optimization algorithms such as quasi-Newton and conjugate gradient methods are directly used to find exact search directions and a golden section method followed by a cubic polynomial approximation is empolyed for approximate line search since the approximate augmented Lagrangian is a nonlinear function of design variable vector. The numberical performance of the proposed approach is investigated by solving three typical dynamic response optimization problems and comparing the results with those in the literature. This comparison shows that the suggested approach is robust and efficient.

• 아동학회지
• /
• 제23권5호
• /
• pp.1-17
• /
• 2002

The influence on children's analogical problem solving of structural highlighting during encoding and retrieval of sources was studied with 379 9-year-old participants. Performance on the first 2 of 4 tests determined the analogical level of each child. For the remaining 2 tests, the child was assigned to 1 of 12 different structural highlighting conditions, including 4 encoding conditions (reading, line, self-line, and self-explain) and 3 retrieval conditions (reminding, cued, and thematic comparison). Results showed that retrieval conditions, not encoding conditions, improved the analogical ability of the child. Children initially low in analogical ability improved in cued retrieval conditions; children initially high in analogical ability improved both in thematically compared and in cued retrieval conditions. Practical implications of the results were discussed.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.51-56
• /
• 1998

In this paper, we analyze the effects of scaling factors on the performance of a fuzzy logic controller(FLC). The quantitative relation between input and output variables of FLC is obtained by using a qualsi-linear fuzzy model, and an approximate transfer function of FLC is dervied from the comparison of it with the conventional PID controller. Then we analyze in detail the effects of scaling factor using this approximate transfer function and root locus method. Also we suggest an on-line tuning method for scaling factors which employs an sample performance function and a variable reference for tuning index.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.680-684
• /
• 1998

This paper presents an efficient method which estimates the systems with unmodeled dynamics using D-L networks. This method is applied for estimating the system with unmodeled dynamics from only input-output information , so it can exclude additional procedure for system description and reduce the computational burden required for real-time estimation. Higher convergence speed is achieved in this manner in comparison with widely-used conventional methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1055-1056
• /
• 2011

This paper deals with optimum design criteria for maximum torque density & minimum current density of a single phase line-start permanent-magnet motor (LSPMM) using RSM (Response Surface Methodology) & FEM (Finite Element Method). The focus of this paper is to find a design solution through the comparison of torque density and minimum current density resulting from rotor shape variations. And then, a central composite design (CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• Nuclear Engineering and Technology
• /
• 제29권2호
• /
• pp.158-166
• /
• 1997

Integrated performance test of Chemical and Volume Control System was successfully performed in 1994. However, an extensive effort to correct hardware and software problems in the letdown line was required mainly due to the lack of adequate simulation code to predict the test accurately. Although the LTC computer code was used during the YGN 3'||'&'||'4 NSSS design process, the code can not satisfactorily predict the test due to it insufficient letdown line modeling. This study developed a numerical model to simulate the letdown test by modifying the current LTC code, and then verified the model by comparing with the test data. The comparison shows that the modified LTC computer code can predict the transient behavior of letdown system lese very well. Especially, the model was verified to be able to predict the "Stiction (composition of stick and friction)" phenomena which caused instantaneous fluctuations in the letdown backpressure and flowrate. Therefore, it is concluded that the modified LTC computer code with the ability of calculating the "Stiction" phenomena will be very useful for future plant design and test predictions.predictions.