• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.873-877
• /
• 2019

본 논문에서는 휴대단말기 안테나의 대표적 형태인 역 F 안테나(Inverted F Antenna, IFA)와 루프(Loop) 안테나에 따른 디지털 노이즈의 결합(coupling) 정도를 특성모드(characteristic mode)를 사용하여 분석한다. 우선, 안테나를 포함한 인쇄회로기판(Printed Circuit Board, PCB)의 특성모드 전류와 디지털 신호라인의 방향에 따른 결합 정도를 비교 분석하고, 이를 토대로 휴대단말기의 WiFi 안테나와 전방 카메라(front camera)의 결합에 대해서 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프형 피더(feeder)로 모델링 했고, 안테나 타입(type)에 따른 노이즈 결합 변화에 대해서 분석을 했다.

• 한국해양학회지:바다
• /
• 제11권4호
• /
• pp.145-151
• /
• 2006

밀물시 조간대 갯벌에서 이동하는 수륙 경계선은 간조와 만조 정선사이에서의 등고선을 나타낸다. 이를 연속 촬영한 영상에서 수륙 경계선을 추출하여 기하보정을 하면 각 등고선에 대한 실제 공간 좌표를 획득할 수 있으며 이를 모두 통합함으로서 조간대 지형에 대한 3차원 지형 정보를 얻는다. 새만금 1호 방조제 외측 갯벌은 방조제 건설이후 방조제 외측에서 가장 뚜렷한 갯벌 지형 변화를 보이는 곳이다. 이 지역의 갯벌 지형에 대하여 디지털 카메라를 이용한 영상 관측을 수행하여 지형을 관측하였으며, 이를 현장 관측한 자료와 비교한 결과 유사한 높이를 나타내었다. 또한 다른 시기에 영상 관측된 지형 자료로부터 그 변화를 검토하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.791-793
• /
• 2006

In the satellite camera, the incoming light source is converted to electronic analog signals by the electronic component for example CCD (Charge Coupled Device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the video processor (A/Ds). The outputs of the A/Ds are digitally multiplexed and driven out using differential line drivers (two pairs of wires) for cross strap requirement. The MSC (Multi-Spectral Camera) in the KOMPSAT-2 which is a LEO spacecraft will be used to generate observation imagery data in two main channels. The MSC is to obtain data for high-resolution images by converting incoming light from the earth into digital stream of pixel data. The video data outputs are then MUXd, converted to 8 bit bytes, serialized and transmitted to the NUC (Non-Uniformity Correction) module by the Hotlink data transmitter. In this paper, the video data streams, the video data format, and the image data processing routine for satellite camera are described in terms of satellite camera control hardware. The advanced satellite with very high resolution requires faster and more complex image data chain than this algorithm. So, the effective change of the used image data chain and the fast video data transmission method are discussed in this paper

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.438-444
• /
• 2018

Structured light vision system has been widely used in 3D surface profiling. Usually, it is composed of a camera and a laser which projects a line on the target. Calibration is necessary to acquire 3D information using structured light stripe vision system. Conventional calibration algorithms have found the pose of the camera and the equation of the stripe plane of the laser under the same coordinate system of the camera. Therefore, the 3D reconstruction is only possible under the camera frame. In most cases, this is sufficient to fulfill given tasks. However, they require multiple images which are acquired under different poses for calibration. In this paper, we propose a calibration algorithm that could work by using just one shot. Also, proposed algorithm could give 3D reconstruction under both the camera and laser frame. This would be done by using newly designed calibration structure which has multiple vertical planes on the ground plane. The ability to have 3D reconstruction under both the camera and laser frame would give more flexibility for its applications. Also, proposed algorithm gives an improvement in the accuracy of 3D reconstruction.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.397-405
• /
• 2004

Texture mapping is the process of covering 3D models with texture images in order to increase the visual realism of the models. For proper mapping the coordinates of texture images need to coincide with those of the 3D models. When projective images from the camera are used as texture images, the texture image coordinates are defined by a camera calibration method. The texture image coordinates are determined by the relation between the coordinate systems of the camera image and the 3D object. With the projective camera images, the distortion effect caused by the camera lenses should be compensated in order to get accurate texture coordinates. The distortion effect problem has been dealt with iterative methods, where the camera calibration coefficients are computed first without considering the distortion effect and then modified properly. The methods not only cause to change the position of the camera perspective line in the image plane, but also require more control points. In this paper, a new iterative method is suggested for reducing the error by fixing the principal points in the image plane. The method considers the image distortion effect independently and fixes the values of correction coefficients, with which the distortion coefficients can be computed with fewer control points. It is shown that the camera distortion effects are compensated with fewer numbers of control points than the previous methods and the projective texture mapping results in more realistic image.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.788-792
• /
• 2004

In this study, the performance of the DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. But the measurement errors of the DPRMs are caused by the strong impact for the pile driving. Therefore, the DPRMs should guarantee its measurement values for the pile driving. For this reason, the performance of the DPRMs by the vibration signal analysis is studied. It is found from this study that the measurement values of the DPRMs are reliable.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.25-31
• /
• 2009

The image processing methods are widely used in many industrial fields to detect defections in inspection devices. In this study an image processing method was conducted for the detection of abnormal pixels in a OLED(Organic Light Emitting Diode) type panel which is used for small size displays. The display quality of an OLED device is dependent on the pixel formation quality. So, among the so many pixels, to find out the faulty pixels is very important task in manufacturing processing or inspection division. We used a line scanning type BW(Black & White) camera which has very high resolution characteristics to acquire an image of display pixel patterns. And the various faulty cases in pixel abnormal patterns are considered to detect abnormal pixels. From the results of the research, the normal BW pixel image could be restored to its original color pixel.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1259-1265
• /
• 1997

삼각측량의 원리를 이용하 거리 탐색기를 사용하여 거리 영상을 취득하는 경우에 발생하는 측정오차를 직관적으로 이해할 수 있도록 기하학적 방법으로 분석하였다. 그 결과로 추정 오차는 카메라에서 물체까지의 거리에 비례하는 것을 보였다. 또한 카메라 초점과 물체를 지나는 직선이 광원과 물체를 연결하는 직선과 직각인 경우 측정값이 가장 정밀한 것을 보였다. 또한 이 결과가 해석학의 기법을 사용하여 분석한 결과와 일치함을 보였고 실험을 통하여 이를 확인하였다. 본 연구 결과는 동일한 카메라가 광원을 사용한 경우에도 카메라의 방향과 물체까지의 거리를 변화시켜서 측정 정밀도를 향상시킬 수 있다는 것을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.231-234
• /
• 2003

This paper describes the structure, operation, image processing, and decision making techniques of a color machine vision system designed for the automatic sorting of soybeans. The system consists of feeder, conveyor belt, line-scan camera, lights. ejector, and a PC Unlike manufactured goods, agricultural products including soybeans have quite uneven features. The criteria for sorting good and bad beans also vary depending on inspectors. We tackle these problem by letting the system learn the inspecting parameters from good samples selected manually by a machine user before running the system for sorting. Real-time processing has another importance In the design. Four parallel DSPs are employed to increase the processing speed. When the designed system was tested with real soybeans and the result was successful.