• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.98-103
• /
• 2005

The Flight Model of MAC (Medium-sized Aperture Camera), a 2.5m GSD class earth observation camera has been aligned and assembled. Topics discussed in this paper include the ground MTF performance of the MAC system, and the alignment of the focal plane assembly. MTF was measured by a knife-edge scanning technique, and a 450 mm diameter Cassegrain collimator with diffraction-limited performance was made and used for the MTF measurements. System MTF was used as the figure-of-merit to find the best focus of the focal plane assembly.

• The Journal of Engineering Geology
• /
• v.6 no.1
• /
• pp.15-22
• /
• 1996

Frequency content of seismic waves observed in field seismic survey in Korea has almost not exceeded 4kHz(wave length 1m). The limited frequency content not only restricts the minimum size of objects which can be surveyed in seismic tomogrpahic application, but also makes a fundamental limit in the resolution of tomogram. This paper shows the resonable result obtained by confirmimg and resolving the problems which can be occured m measuring procedure for the small - sized section through field application. Seismic tomographic field survey was performed for a concrete construction for railroad bridge in Korea, and to this the tomographic measurements for the stone-build foundation construction for a bell house of church in Germany were compared.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.451-461
• /
• 1997

The soil NO flux measurements in Korea were made from 17 May 1997 to 16 June 1997 on grass land at Kunsan National University in southwestern Korea by using flow-through chamber technique. The experiment was conducted in an effort to determine the role of natural emissions of NO on rural atmospheric photochemistry, and to understand the soil NO emission mechanism with respect to soil parameters. Soil NO fluxes were measured every minutes and averaged in every 15 minutes as well as soil temperature. Soil samples were analyzed for $NO_3^-, NH_4^+$, and moisture in soil. Soil nitrate was not detected in most times, and total N-containing was limited in site soils. There was a optimum range of soil moisture and temperature for soil NO flux. The overall average of soil NO emission rates were found to be 1.30 $\pm 0.92 ngNm^{-2}s^{-1}$ (n=1219), and ranged from 0.01 ngNm^{-2}s^{-1}$ to 5.62 ngNm^{-2}s^{-1}$. Diurnal variation of soil NO emission was typical, which was in higher level during daytime, and was in lower level over the night. NO flux showed a strong soil temperature dependence $(r^2=0.78)$, but not with soil moisture and soil N-containing during this experimental period; NO fluxes increased exponentially as soil temperature increased. In order to assure the relevant relationship between soil NO flux and the soil parameters, long-term soil flux measurement on different types of land use should be planned and conducted continuously.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.131-141
• /
• 2002

The present study, first, reviews theoretically previous studies about the concept and quality of services as well as tools to measure the quality. Second, it reviews theoretically previous studies about the concept and quality of special services as well as tools to measure the quality. According to the results of reviewing previous studies on service quality, it is considered that the variance among several researchers concerning the measurements of service quality is affected significantly by factors such as the procedures of data collection and analyses utilized in the studies. In addition, the fact that dimensions are different, or some dimensions are not independent, is highly likely to be based on the unique characteristics of business categories, in addition to research procedures. Accordingly, when measuring service quality in future studies, it may be desirable to adapt measuring tools partially for the characteristics of each service category, and to generalize the adjusted tools over the specific category. Especially studies on the quality of special service have been carried out in limited scope so far. Thus, it is required to develop and refine comprehensive and appropriate criteria and detailed questions to measure the quality of fashion education service. Furthermore, studies are necessary with regard to relations among relevant factors such as customers' satisfaction and perception on education service quality after they experience the services.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.983-993
• /
• 2001

This paper proposed a novel chip type ceramic dielectric antenna by using the advanced meander line technique that the radiational metals are formed on the face of ceramic dielectric(8$\times$4$\times$1.5 mm, alumina) and both faces of substrate(1.0 mm thickness, FR-4). The performance of the antenna model has a good agreements between measurements and computed results. Resultly, it has a 10 dB return-loss bandwidth(2.4∼2.4835 GHz) and 1.7 dBi measured radiation gain for Bluetooth application. The proposed antenna model can overcome the limited radiation of the small-sized antenna.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4386-4404
• /
• 2016

Most existing salient object detection algorithms commonly employed segmentation techniques to eliminate background noise and reduce computation by treating each segment as a processing unit. However, individual small segments provide little information about global contents. Such schemes have limited capability on modeling global perceptual phenomena. In this paper, a novel salient object detection algorithm is proposed based on region merging. An adaptive-based merging scheme is developed to reassemble regions based on their color dissimilarities. The merging strategy can be described as that a region R is merged with its adjacent region Q if Q has the lowest dissimilarity with Q among all Q's adjacent regions. To guide the merging process, superpixels that located at the boundary of the image are treated as the seeds. However, it is possible for a boundary in the input image to be occupied by the foreground object. To avoid this case, we optimize the boundary influences by locating and eliminating erroneous boundaries before the region merging. We show that even though three simple region saliency measurements are adopted for each region, encouraging performance can be obtained. Experiments on four benchmark datasets including MSRA-B, SOD, SED and iCoSeg show the proposed method results in uniform object enhancement and achieve state-of-the-art performance by comparing with nine existing methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.40-47
• /
• 2001

Optical measurement methods make it possible to detect object displacements with high resolution and noncontact measurements. Also, they are very robust against EMI noises and have long operation range. An optical triangulation sensor is one of widely used displacement measurement sensors for its sub-micron resolution, fast response, simple structure, and low cost. However. there are several errors caused by inclinations of a surface. speckle effects, power fluctuations of light sources, and noises of detectors. In this paper, in order to minimize error effects, we performed error analysis and proposed a new structure. Then, we setup a new modeling method and verify it through simulations and experiments. Based on the new model. we propose a new sensor structure and establish design criteria. Finally, we design a signal processing system to overcome a resolution-limited problem of light detectors. The resolution of the proposed system is 0.2${\mu}{\textrm}{m}$ in 5mm operating range.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.7
• /
• pp.923-928
• /
• 2000

Objective : The reliability of transcranial doppler sonography(TCD) for predicting delayed ischemic neurologic deficit( DIND) was investigated in patients with aneurysmal subarachnoid hemorrhage(SAH). Methods : The velocity of blood flow through the middle cerebral artery was measured by TCD in 70 patients treated surgically within 72 hours due to ruptured cerebral aneurysm. A correlation between measured maximal mean blood flow velocities and clinical factors including age, hypertension, Hunt-Hess grade, Fisher grade, DIND, and outcome was made. Results : An age-dependent reduction of the measured maximal mean velocities was found(r＝-0.4043, p<0.001). Flow velocities in hypertensive patients were significantly lower than in the normotensive individuals(two-tailed T test, p<0.05). There was no significant difference between the flow velocities and evaluated other clinical factors. When the flow velocities of 14 patients who developed DIND were compared with those of patients without deficits, no significant difference was seen. A significant increase in flow velocities in the days before the onset of DIND was found only in 4 of 14 cases. High flow velocities did not necessarily mean impending neurological deficits : 6 of 70 patients tolerated flow velocities over 160cm/s. Conclusion : We suggest that TCD readings have limited utility for predicting DIND following SAH, especially in older or hypertensive patients. More direct measurements of blood flow are necessary to adequately predict which patients are at high risk of DIND.

• Journal of Oriental Neuropsychiatry
• /
• v.28 no.4
• /
• pp.303-318
• /
• 2017

Objectives: To establish a base for further research by reviewing studies on traditional Chinese medicine treatment for Tourette Syndrome. This is the purpose of this study. Methods: Clinical studies involving the effects of traditional Chinese medicine treatment for Tourette Syndrome, published January 2010~June 2017, were obtained from CNKI, Pubmed. Selected Studies were evaluated by the Jadad Scale. Results: Among a total of 252 articles, 39 articles that meet the criteria were selected. 'Diagnostic and Statistical Manual for Mental Disorders, 4th edition (DSM-IV)' was most frequently used as diagnosis criteria. 'Yale Global Tic Severity Scale (YGTSS)' was primarily used for outcome measurements. Most of the studies showed effective results of traditional Chinese medicine therapy. However, the quality of a selected clinical studies was low. Conclusions: Despite several limitations, various studies to prove limited yet effective traditional Chinese medicine treatment on Tourette Syndrome provides much significance. Subsequent studies conducted by the complementary systematic review and well-designed clinical trials using the methodological quality will be needed to more firmly validate the effect of traditional Chinese medicine therapy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.80-89
• /
• 1998

The residual gas in an spark-ignition engine is one of important factors on emissions and performance such as combustion stability. With high residual gas fractions, flame speed and maximum combustion temperature are decreased and these are deeply related with combustion stability especially at idle and NOx emission at relatively high engine load. Therefore, there is a need to characterize the residual gas fraction as a function of the engine operating load. Therefore, there is a need to characterize the residual gas fraction as a function of the engine operating parameters. In the present study, the quantitative measurement technique of residual gas fraction was studied by using Fast Response Flame Ionization Detector(FRFID). The measuring technique and model for estimation of residual gas fraction were reported in this paper. By the assuming that the raw signal from FRFID saturates with the same slope for firing and misfiring cycle, in-cylinder hydrocarbon(HC) concentration can be estimated. Residual gas fraction can be obtained from the in-cylinder HC concentration measured at firing and motoring condition. The developed measurement and calibration procedure were applied to the limited engine operating and design condition such as intake manifold pressure and valve overlap. The results show relevant trends by comparing those from previous studies.