• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.487-497
• /
• 2011

Numerical analysis has been performed to investigate the rotor speed and pitch range variations when the airspeed is increased in autorotation. Transient Simulation Method(TSM) was used to obtain the steady states of autorotation. The rotor blade was analyzed by the two-dimensional compressible Navier-Stokes solver in order to adapt to the airspeed increase and the results were used in the transient simulation method. Meanwhile, the Pitt/Peters inflow theory was used to supply the induced velocity fields. For the prescribed torque equilibrium state, the combinations of velocity, shaft angle, and pitch angle were produced to investigate the rotor speeds and variable ranges. The rotor tip Mach number and rotor speed were correlated and the trim range of pitch angle was observed with respect to the shaft angle decrease.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.559-564
• /
• 2011

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 90km/h for estimating the curving performance and running safety of depressed center flat car of 3-axle bogie. As the test results, could confirm the curving performance and running safety of depressed center fiat car of 3-axle bogie from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.6, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.957-960
• /
• 2004

From a water-environmental point of view, with a change of understanding and concern about vegetation, it changes that vegetation acts as stability of channel and bed, providing habitats and feed for fauna, and means improving those with appreciation of the beautiful but resistant factor to the flow So, it becomes important concern and study subjects that turbulent structure by vegetation, shear stress and transport as well as roughness and average velocity by vegetation. But from a hydraulic point of view, vegetation causes resistance to the flow and can increase the risk of flooding, Therefore, this thesis concern the flow characteristics in vegetated open channels. According to the experimental results, $z_0$ was on an average $0.4h_p$ in a vegetated open channel. So, the elevation corresponding to zero velocity in a vegetated channel was the middle of roughness element. The limit for logarithmically distributed profile over the roughness element was from $z_0$ to $0.80h_{over}$ for a vegetated channel. Among the existing theory, the method of Kouwen et al.(1969), Haber(1982), and El-Hakim and Salama(1992) except Stephan(2001) gave a very good value compared to the measured velocity profile.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.89-94
• /
• 2001

A new design method of the microwave multisection impedance transformer is proposed. This method is based on the inverse scattering theory using the frequency domain reflection coefficient of the transformer to be designed. In the first step, the permittivity profile of a virtual one-dimensional dielectric medium is reconstructed using the desired reflection coefficient. In the second step, the transformer which is equivalent to the reconstructed dielectric medium in view of reflection characteristics is synthesized. Theoretically, this method can be used to design the impedance matching transformers with arbitrary passband characteristics within the limit of the Bode-Fano criteria[1]. Our approach is examined for two design examples to show that it is valid.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1141-1149
• /
• 1992

This paper presents a robust centralized control scheme for a magnetic bearing system which supports a rigid rotor at both shaft ends in the radial direction. The negative stiffness element and the inductive force associated with bearing magnetic field are considered in the dynamic model of the system. For this model, the controllability and observability are examined, and then a robust control theory is applied to design two types of multi-input multi-output servocontrollers. A general servocompensator is embedded in the first one and a centralized PID controller is suggested as a second one. By simulation study, the performance of two types of servocontrollers are compared in the aspects of disturbance rejection, reference tracking and the robustness limit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.669-675
• /
• 2003

To increase fishery resources in coastal waters, juvenile fish and bivalves are artificially released every year in Korea. This study provides a methodology to estimate an optimal release quantity based on the carrying capacity of the receiving basins. Carrying capacity was defined by E.p. Odum's theory of ecosystem development as the upper limit of biomass, where total system respiration equals total primary production. The Ecopath trophic ecological model was used to determine carrying capacity in the surfzone ecosystem of Bangjukpo on the southern coast of Korea. Using a top-down control method, various biomasses of fish groups were given to the simulation, with primary production constant and no catch. The results showed that biomass of selected fish groups increased by two orders of magnitude, yielding a five-fold increase in overall consumer biomass. The resultant values are 10 times higher than those estimated in open seas. This can be explained by higher primary production in the Bangjukpo surfzone ecosystem. This method can be used for strategic releases and ecosystem management, particularly when based on an ecological background.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.145-152
• /
• 1996

In this study, the technique to evaluate the extreme design wave height of certain return period is developed from the given measured or hindcasted sea state data of concerned area for limited period. By using the order statistics and Monte Carlo Simulation method, the best fit probability distribution function with proper parameters describing the given wave height data is chosen, from which extreme design wave height can be predicted by extrapolation to the desired return period. The fitness and the confidence limit of the chosen probability function are also discussed. Application calculation is carried out for the wave height data given by applying the Wilson wave model theory to major 50 typhoon wind data affecting Korean South coast during the year from 1938 to 1987.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.411-418
• /
• 2006

There are mainly two types of bang-bang controllers for nominal linear time-invariant (LTI) system. Optimal bang-bang controller is designed based on optimal control theory and suboptimal bang-bang controller is obtained by using Lyapunov stability condition. In this paper, the suboptimal bang-bang control method is extended to LTI system involving both control input saturation and structured real parameter uncertainties by using Lyapunov robust stability condition. Two robust optimal bang-bang controllers are derived by minimizing the time derivative of Lyapunov function subjected to the limit of control input. The one is developed based on the classical quadratic stability(QS), and the other is developed based on the affine quadratic stability(AQS). And characteristics of the two controllers are compared. Especially, bounds of parameter uncertainties which theoretically guarantee robust stability of the two controllers are compared quantitatively for 1DOF vibrating system. Moreover, the validity of robust optimal bang-bang controller based on the AQS is shown through numerical simulations for this system.

• Journal of Korean Academy of Nursing
• /
• v.24 no.1
• /
• pp.70-84
• /
• 1994

People experience health behaviors for themselves and theses have diversity according to each culture and people and further there is an inherent meaning in health behavior The purpose of this study was to explore the health cconcept of Korean people and their pattern of health behavior The research method was a questionaire including open questions and the subjests were 164 adults age from 21 to 61. The result of this study are as follows : 1. Perceived health concepts by adults were “possibility”, “responsibility”, “being free”, “happiness”, “brightness”, “power”, “life”, “importance”, “mental rest”, “state of nnonilliness”, “death” 2. Health behaviors carried out by Korean adults were “maintance of psychological comfort”, “exercise”, “work”, “maintance of balanced diet”, “having a hobby”, “eating health food”, “health check up”, “prevention of hazards”, “eating natural food”, “maintenance of personal relationships”, “rest”, “having religion”, “making contract with nature”, “relaxation”, “limit one’s tastes”. 3. The perceived purposes of health behavior by Koran adults were maintenance of a joyful life, health maintenance, health restoration, prevention of illness, achievement of reponsibility, haying a hobby, longevity, peaceful death. Korean health concepts in this study showed a trend that reflects the rule of family and forcused harmony and eating habits. Korean health behavior in this study showed a trend that forcuses on emotional comfort which reflects oriental thinking. The result of this study will contribute to build a theory of health behavior and to derive strategies of health behavior to promote health.

• Korean Journal of Social Welfare
• /
• v.47
• /
• pp.334-368
• /
• 2001

The purpose of this study is to apply to the phenomenological self-evaluation method in the social welfare agency. It means that the phenomenological self-evaluation method accepts "the reality" which occurs in the social welfare setting, and functions for the social worker to play dual role of practitioner-evaluator. This paper examines two dimensions of social work evaluation theory and practice. Firstly, this study is to investigate a trend of evaluation in social work setting, and seeks theoretical aspect of phenomenological self-evaluation method, with emphasis on the strength and limit of the positivism evaluation methods. Although qualitative evaluation was suggested to make an alternative to the positivism by qualitative researchers, they did not suggest the specific methods and roles of the practitioner-evaluator. In this study, two directions of the phenomenological self-evaluation method are suggested to overcome the limitations. which are "environment-relation self-evaluation" and "program-oriented self-evaluation". Secondly, the result of phenomenological self-evaluation studies for the social welfare community center program and organization in kangnam district from June, 1994 (Program-oriented self-evaluation) to march, 2000 (Environment-relation self-evaluation) are presented. the phenomenological self-evaluation study showed the expected outcome such as; reflective self-training, making a practice knowledge, enhancing service quality, and reinforcing the identity of social welfare profession.