• 멤브레인
• /
• 제19권3호
• /
• pp.183-188
• /
• 2009

아크릴폐수를 광촉매로 전처리하여 막오염인자를 최소화 한 후 막조합공정에 적용하였다. 한외여과막과 정밀여과막을 역삼투막과 조합을 이루어 막조합공정을 구성하였으며 광촉매처리수를 온도 및 압력변화에 따라 막조합공정에 적용하여 분리특성을 확인하였다. 정밀여과막 모듈 혹은 한외여과막 모듈의 투과수는 역삼투모듈로 보내지며 역삼투 모듈의 최종적인 투과량은 모듈 set 2 (MWCO 200,000 UF+RO)의 역삼투 모듈이 우수하였다. UF 및 MF 모듈에서 TDS, T-N 및 COD의 제거효율은 온도 및 압력변화에 영향을 받지 않고 제거효율 또한 낮음을 알 수 있었다. 그러한 결과로 RO 모듈에서 TDS, T-N 및 COD가 우수한 제거효율을 보였다. UF 및 MF모듈에서의 탁도 제거효율은 우수한 경향(제거효율 99% 이상)을 보였다. 막조합공정에서 처리된 광촉매처리수는 배출 허용기준치를 충족하고, 재활용이 가능하였다.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.329-350
• /
• 2016

A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

• Preventive Nutrition and Food Science
• /
• 제17권4호
• /
• pp.274-279
• /
• 2012

For the quantitative analysis of genetically modified (GM) maize in processed foods, primer sets and probes based on the 35S promoter (p35S), nopaline synthase terminator (tNOS), p35S-hsp70 intron, and zSSIIb gene encoding starch synthase II for intrinsic control were designed. Polymerase chain reaction (PCR) products (80~101 bp) were specifically amplified and the primer sets targeting the smaller regions (80 or 81 bp) were more sensitive than those targeting the larger regions (94 or 101 bp). Particularly, the primer set 35F1-R1 for p35S targeting 81 bp of sequence was even more sensitive than that targeting 101 bp of sequence by a 3-log scale. The target DNA fragments were also specifically amplified from all GM labeled food samples except for one item we tested when 35F1-R1 primer set was applied. A reference plasmid pGMmaize (3 kb) including the smaller PCR products for p35S, tNOS, p35S-hsp70 intron, and the zSSIIb gene was constructed for real-time PCR (RT-PCR). The linearity of standard curves was confirmed by using diluents ranging from $2{\times}10^1{\sim}10^5$ copies of pGMmaize and the $R^2$ values ranged from 0.999~1.000. In the RT-PCR, the detection limit using the novel primer/probe sets was 5 pg of genomic DNA from MON810 line indicating that the primer sets targeting the smaller regions (80 or 81 bp) could be used for highly sensitive detection of foreign DNA fragments from GM maize in processed foods.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(환경)
• /
• pp.440-449
• /
• 1994

Current risk assessment practices largely reflect the need for a consistent set of relatively rapid, first-cut procedures to assess 'plausible upper limits' of various risks. These practices have important roles to play in 1) screening candidate hazards for initial attention and 2) directing attention to cases where moderate-cost measures to control exposures are likely to be warranted, in the absence of further extensive (and expensive) data gathering and analysis. A problem with the current practices, however, is that they have led assessors to do a generally poor job of analyzing and expressing uncertainties, fostering 'One-Number Disease' (in which everything from one's social policy position on risk acceptance to one's technical judgment on the likelihood of different cancer dose-response relationships is rolled into a single quantity). At least for analyses that involve relatively important decisions for society (both relatively large potential health risks and relatively large potential economic costs or other disruptions), we can and should at least go one further step - and that is to assess and convey both a central tendency estimate of exposure and risk as well as our more conventional 'conservative' upper-confidence-limit values. To accomplish this, more sophisticated efforts are needed to appropriately represent the likely effects of various sources of uncertainty along the casual chain from the release of toxicants to the production of adverse effects. When the effects of individual sources of uncertainty are assessed (and any important interactions included), Monte Carlo simulation procedures can be used to produce an overall analysis of uncertainties and to highlight areas where uncertainties might be appreciably reduced by further study. Beyond the information yielded by such analyses for decision-making in a few important cases, the value of doing several exemplary risk assessments in. this way is that a set of benchmarks can be defined that will help calibrate the assumptions used in the larger number of risk assessments that must be done by 'default' procedures.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.904-913
• /
• 2005

This paper deals with an integrated problem of inventory control and dynamic pricing strategies for a commodity with price and sales-period dependent demand pattern, where a seller and customers have complete information of each other. The problem consists of two parts; one is each buyer's benefit problem which makes the best decision on price and time for buyer to purchase items, and the other one is a seller's profit problem which decides an optimal sales strategy concerned with inventory control and discount schedule. The seller's profit function consists of sales revenue and inventory holding cost functions. The two parts are closely related into each other with some related variables, so that any existing general solution methods can not be applied. Therefore, a simplified model with single seller and two customers in considered first, where demand for multiple units is allowed to each customer within a time limit. Therewith, the model is generalized for a n-customer-classes problem. To solve the proposed n-customer-set problem, a dynamic programming algorithm is derived. In the proposed dynamic programming algorithm, an intermediate profit function is used, which is computed in case of a fixed initial inventory level and then adjusted in searching for an optimal inventory level. This leads to an optimal sales strategy for a seller, which can derive an optimal decision on both an initial inventory level and a discount schedule, in $O(n^2)$ time. This result can be used for some extended problems with a small customer set and a short selling period, including sales strategy for department stores, Dutch auction for items with heavy holding cost, open tender of materials, quantity-limited sales, and cooperative buying in the on/off markets.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.157-167
• /
• 2015

In order to provide simple and accurate wave theory in design of offshore structure, an analytical approximation is introduced in this paper. The solution is limited to flat bottom having a constant water depth. Water is considered as inviscid, incompressible and irrotational. The solution satisfies the continuity equation, bottom boundary condition and non-linear kinematic free surface boundary condition exactly. Error for dynamic condition is quite small. The solution is suitable in description of breaking waves. The solution is presented with closed form and dispersion relation is also presented with closed form. In the last century, there have been two main approaches to the nonlinear problems. One of these is perturbation method. Stokes wave and Cnoidal wave are based on the method. The other is numerical method. Dean's stream function theory is based on the method. In this paper, power series method was considered. The power series method can be applied to certain nonlinear differential equations (initial value problems). The series coefficients are specified by a nonlinear recurrence inherited from the differential equation. Because the non-linear wave problem is a boundary value problem, the power series method cannot be applied to the problem in general. But finite number of coefficients is necessary to describe the wave profile, truncated power series is enough. Therefore the power series method can be applied to the problem. In this case, the series coefficients are specified by a set of equations instead of recurrence. By using the set of equations, the nonlinear wave problem has been solved in this paper.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.659-665
• /
• 2016

풋월 비탈면 설계 시 해석시간이 짧고, 간편하여 한계평형법을 주로 이용하였으나, 쟁기형태파괴를 모사하기에는 어려움이 따른다. 따라서, 본 연구에서는 2차원 DEM (Distinct Element Method) 해석프로그램인 UDEC을 이용해 수치해석을 수행하여 풋월 비탈면에서 발생되는 쟁기형태파괴에 미치는 영향인자를 분석하였다. 매개변수분석은 암반절리(층면절리, 공액절리, 비탈면의 하단에 위치한 절리)의 구조 및 암반절리상태 등을 변경하여 수행하였으며, 비탈면의 안전율은 강도감소법(Strength Reduction Method)을 이용하여 산정하였다. 수치해석 결과를 통해 쟁기형태파괴는 공액절리(conjugate joint)의 경사각에 주로 의존하고 있음을 확인할 수 있었으며, 층리의 한계간격 및 슬래브의 한계길이가 공액절리의 경사각에 영향을 받는 것으로 나타났다. 본 연구결과는 비탈면 보강을 포함한 풋월 비탈면의 최적설계 및 시공에 적용될 수 있을 것으로 판단된다.

• 한국병원경영학회지
• /
• 제18권3호
• /
• pp.1-26
• /
• 2013

To improve the competitiveness of the hospital provides high quality medical services in a hospital coordinator role is emphasized. This study on customer orientation of the role ambiguity in order to identify the impact of degree of customer orientation were analyzed for demographic differences. Dependent variable, customer orientation affects role ambiguity as independent variables, and regression analysis were set. And the control variables are set to support situational factors, customer orientation on the role ambiguity and hierarchical regression analysis was performed. Obtained through empirical results are as follows: First, according to the demographic characteristics of the hospital coordinator customer orientation, the difference between gender and medical subjects are not shown. Age, education, work experience, job title, and the hospital on the pattern of customer orientation has shown a difference. Second, according to the hospital coordinator role ambiguity about its impact on customer orientation analysis can be a role implementation, job implementation, opinion communication in achieving customer orientation was negatively affected. Third, role ambiguity, and customer orientation factors for the moderating effects of organizational support for the role of customer orientation can role implementation, job implementation, opinion communication was a statistically significant. Fourth, the role ambiguity factors and customer orientation for the administrative support for the moderating effect of customer orientation and role implementation is significant, but job implementation, opinion communication were statistically significant. Fifth, the role ambiguity factors and customer support for customer orientation and customer orientation for the moderating effects of role performance and the opinion communication was not statistically significant. However, job implementation was statistically significant. The limitations of this study are as follows: First, role ambiguity, situational factors and support due to limitations of the variable factors that may affect the customer orientation of a number of factors were excluded. So many exogenous variables in the measurement process can affect. Second, the variables measured as problems of self-assessment by the variable measuring the respondent's bias may occur. Third, This study is difficult to generalize. In other words, several areas of the province conducted by the empirical results of the survey as a limit on the overall generalization can follow.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.223-232
• /
• 1997

The accuracy and precision of a modified method of NIOSH Method 7600 and EPA method 218.6 was determined for analyzing hexavalent chromium, Cr(VI), collected on PVC filter from workplace air. The method was designed to extract from Cr(VI) on PVC filter with a alkali solution, 2% NaOH/3% $Na_2CO_3$, and to analyze it using ion chromatography/visible absorbance detection(IC/VAD). The results and conclusion are as the following. 1. The peak of Cr(VI) was separated sharply on chromatogram and was linearly related with Cr(VI) concentration in sloution. The correlation coefficient was 0.9999 in a calibration curve. The limit of detection was 0.25 $0.25{\mu}g/sample$. 2. The accuracy(% recovery) was 93.3% in a set of sample($9-50{\mu}g$) stored for a day, and 100.1%($10-60{\mu}g$) in another set of samples stored for 2 hours. It is assumed that the difference in recovery by storage time was due to reduction of Cr(VI) to Cr(III). 3. The precision(coefficient of variation, CV) of the method was 0.015 in spiked samples with Cr(VI) standard solution, and 0.010 in spiked samples with plating solution from a chrome electroplating factory. The overall CV in all types of samples was 0.0013. 4. The Cr(VI) was stable in 2% NaOH/3% $Na_2CO_3$ at least for 10 hours. In conclusion, the IC/VAD method is appropriate for determining low-level Cr(VI) in workplace air containing various interferences.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.423-430
• /
• 2010

표면의 균열, 겹침결함, 금형의 코너반경이 작아 재료의 유동성이 낮을 때 발생하는 콜드셧, 부분충진등의 단조결함이 없는 자동차용 단조 플랜지를 생산하기 위해서 열전달, 단류선 흐름, 응력분포를 고려하여 형단조 공정과 금형에 대한 해석을 수행하였다. 축박기(up-set) 단조, 예비성형, 최종성형, 단조압력으로 구성된 단조과정은 유한요소법으로 해석되었다. 예비성형과 상하 금형의 높이비율이 단조공정과 금형에 미치는 영향을 평가하여 예비금형의 각 $10^{\circ}$와 최종 금형의 상하비율 1.5:1이 단조결함이 없는 결과를 나타내었다. 이를 반영한 새로 설계된 금형은 재료강도, 완전충진, 하중한계 13,000 KN 이라는 공정변수를 모두 만족시켰다. 이론 입증을 위해서 개선된 금형과 플랜지가 제작되었으며, 단조결함이 발견되지 않았다.