References
- Petrov, P., Perfilov, V. and Sebunov, S., 2006, "Prevention of Lap Formation in near Net Shape Isothermal Forging Technology of Part of Irregular Shape Made of Aluminium Alloy A92618," Journal of Materials Processing Technology, Vol. 177, No. 1-3, pp. 218-223. https://doi.org/10.1016/j.jmatprotec.2006.03.206
- Cho, H. Y., Kim, Y. T., Kim, K. W. and Kim, W. J., 2008, "Finite Element Analysis for Multi -stage Forging Process Design of Bolt with Nonaxisymmetric Washer Cam," Journal of the Korean Society of Marine Engineering, Vol. 32, No. 4, pp. 585-595. https://doi.org/10.5916/jkosme.2008.32.4.585
- Yeom, S. H., Nam, K. O., Hwang, D. S., Kwon, H. S. and Hong, S. I., 2006, "A Study on the Process Development of Mono Steel Forged Piston for Diesel Engine," Trans. of KSAE, Vol. 14, No. 3, pp. 44-50.
- Monaghan, J., 2001, "A Finite Element Analysis of Cold-Forging Dies Using Two and Three Dimensional Models," Journal of Materials Processing Technology, Vol. 118, No. 1-3, pp. 286-292. https://doi.org/10.1016/S0924-0136(01)00960-8
- Biswas, S. K. and Rao, K. V. J., 1985, "Flow of Metal into the Flash Gap in the Last Stages of a Plane-strain Closed-die Forging Operation," Journal of Mechanical Working Technology, Vol. 11, No. 3, pp. 319-331. https://doi.org/10.1016/0378-3804(85)90004-X
- Kim, H. Y., Kim, J. J. and Kim N. S., 1993, "An Analysis of Hot Closed-die Forging to Reduce Forging Load and Die Wear," Proc. of the KSME Spring Annual Meeting (1), pp.839-844.
- Joun, M. S., Hwang, S. M. and Moon, H. G., 1995, "Automatic Computer Simulation of Multi -stage Hot Forging Processes Flow, Temperature and Die Analyses," Proc. of the KSME Spring Annual Meeting (1), pp. 337-340.
- Lee, S. R., Lee, Y. G., Park, C. H. and Yang, D. Y., 2000, "Optimal Design of Preform in Hot Forging," Proc. of the KSME Spring Annual Meeting (A) pp. 780-785.
- Park, J. G., Park, J. H., Choi, S. G., Na, K. H. and Kim, Y. S., 2006, "Application of FE Analysis for Optimal Design of Caulking Process," Journal of Materials Processing Technology, Vol. 15, No. 3, pp. 257-279.
- Park, J. G., Hwang, H. S., Lee, S. J., Hong, S. C., Lim, S. H., Lee, K. S. and Lee, K. J., 2003, "FE Analysis of Hot Forging Process and Microstructure Prediction for Lower Arm Connector," Trans. of the KSME (A), Vol. 27, No. 7, pp. 1243-1250. https://doi.org/10.3795/KSME-A.2003.27.7.1243
- Byun, H. S., Kim, B. M. and Ko, D. C., 2005, "A Study on Transfer Process Design on Hot Forging of Bearing Hub," Proc. of KSPE Autumn Annual Meeting (1), pp. 999-1002.
- Kim, Y. S., Yang, S. H., Shan, D., Choi, S. O., Lee, S. M. and You, B. S., 2006, "Three-Dimensional Rigid-Plastic FEM Simulation of Metal Forming Process," Journal of Materials Engineering and Performance, Vol. 15, No. 3, pp. 275-279. https://doi.org/10.1361/105994906X108738
- Incropera, F. P. and Dewitt, D. P., 2002, Fundamentals of Heat and Mass Transfer, 5th Ed., John Wiley and Sons, N.J., p. 8.
- http://www.matweb.com/