• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.190-195
• /
• 2004

The compression-compression fatigue properties of the closed cell Al-Si-Ca alloy foams have been studied. The monotonic and cyclic compressive properties were compared with each other and the fatigue stress-life (S-N) curves were presented. In compression-compression fatigue, the crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting which is in accordance with the findings of previous researchers [1-3]. Young's modulus of the foam was found to decrease with the increasing strain in case of fatigue test however in case of monotonic compression test the value of Young's modulus increased with the strain (number of cycles). The endurance limit on the basis of $10^{7}$ cycles obtained by extrapolating the experimental results were 0.98 MPa and 1.70 MPa for load ratios 0.1 and 0.5 respectively which are 34 % and 59 % of the plateau stress.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC) are recently focused on communication systems due to its good performance. The standard of WiBro has also included LDPC codes as a channel coding. The weak point of implementation for LDPC encoder is that conventional binary Matrix Vector Multiplier has many clock cycles which limit throughput. In this paper, we propose semi-parallel architecture by using cyclic shift registers and exclusive-OR without conventional Matrix Vector Multipliers over the standard parity check matrices with Circulant Permutation Matrices(CPM). Furthermore, multi-rate encoder is designed by using proposed architecture. Our encoder with multi-rate for IEEE 802.16e LDPC has lower clock cycles and higher throughput.

• Economic Analysis
• /
• v.26 no.4
• /
• pp.39-64
• /
• 2020

Typical business cycle models have difficulties in explaining key macroeconomic labor market variables, such as employment and unemployment, as they usually consider labor hour choices only. In this paper, we introduce labor market search and matching frictions into a New Keynesian nominal rigidity model and estimate it by Bayesian methods to examine the dynamics of the key labor market variables and business cycles in Korea. The results show that unemployment rates are largely explained by technology shocks, which affect the labor demand side, as well as labor supply shocks. In addition, wage bargaining shocks originating from the bargaining process between firms and workers have non-negligible negative effects on output and employment growth, and careful measures need to be taken to limit their adverse effects.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.623-624
• /
• 2006

The behavior of hardmetals under cyclic loads is investigated. Unnotched specimens were employed to obtain practical information regarding fatigue in hardmetals. All the tested hardmetals exhibit an increase in the number of cycles until failure with a decrease in the maximum stress, i.e., the hardmetals exhibit a high fatigue sensitivity. The fatigue strength increases with the cobalt content. Although distinct fatigue limits, as observed in metals, cannot be observed, the calculated fatigue limit stress at $10^7$ cycles is found to be approximately 70% of the flexural strength, and the stress value exhibits a linear relationship with the flexural stress.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.67-70
• /
• 2007

A methodology to evaluate fatigue vulnerability of steel bridge members affected by corrosion and truck traffic variation is proposed. A fatigue limit state function including corrosion and traffic variation effects is established to make the criterion whether the steel bridge member is damaged by fatigue. Corrosion effects are expressed as increase of the average corrosion depth, and the traffic variation effects are modeled as the accumulated number of stress cycles. Reliability analysis is carried out by Monte-Carlo simulation method for the fatigue limit state function. The methodology Proposed is verified by comparing reference study and applying for the steel bridge in service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1692-1699
• /
• 2004

In this paper, we propose a method to avoid obstacles that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. We also show computer simulation results of Arnold equation, Chua's equation, Hyper-chaos equation, Hamilton equation and Lorenz chaos trajectories with one or more Van der Pol obstacles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.82-87
• /
• 2012

For different ferrite-pearlite matrix structure, contain more than 90% spheroidal ratio of graphite, GCD 45-3, GCD 50, GCD 60 series and 70%, 80%, 90% spheroidal ratio of graphite, GCD 40, GCD 45-1, GCD 45-2 series, this paper has carried out rotary bending fatigue test, estimated maximum and mean size of spheroidal graphite, investigated correlation. It was concluded as follows. (1) Fatigue limit in $10^7$cycles and numbers of spheroidal graphite per 1$mm^2$ was linear relation. (2) projection area of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of projection area of defects may be used as a guideline for the control of inclusion size in the steelmaking processes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1619-1625
• /
• 1997

This paper concerns a 2-axis PR type pneumatic manipulator system translating in vertical and rotating in horizontal directions. A simplified linear model is mathematically formulated similar to the pneumatic acturators in dynamic responses in order to devise an appropriate position control scheme. A PD controller preceding the on/off solenoid valve turns out not only economical but also effective in reducing rise time and amplitude of limit cycles, if its control gains are determined on the basis of frequency response. And, additional implementation of symmetric or asymmetric deadband at the PD controller output greatly helps minimize valve opening numbers, positional error, and undesirable direction-dependent property due to the gravitational load. Such a control concept is synthesized through numerical simulations and next applied to the experimental set-up, featuring enhanced positional servo characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.584-588
• /
• 2003

In this paper, we propose a method to avoid obstacles that have unstable limit cycles in a Hyperchaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. When a chaos robot meets an obstacle in a hyper-chaos equation trajectory, the obstacle reflects the robot. We also show computer simulation result of hyperchaos equation trajectories with one or more Van der Pol obstacles.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.206-214
• /
• 2003

In this paper, we propose a method to avoid obstacles that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. When a chaos robot meets an obstacle in an Arnold equation or Chua's equation trajectory, the obstacle reflects the robot. We also show computer simulation results of Arnold equation and Chua's equation and random walk chaos trajectories with one or more Van der Pol obstacles and compare the coverage rates of each trajectory. We show that the Chua's equation is slightly more efficient in coverage rates when two robots are used, and the optimal number of robots in either the Arnold equation or the Chua's equation is also examined.