• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.267-275
• /
• 2007

In this study, relationship between the air pollution of Siheung city and the relative contribution of automobiles to the city's pollution was evaluated for the first time. Then, new air pollution exposure index was developed through simulation. Using the newly developed index, two different urban development scenarios were compared to present a sustainable urban development plan to reduce air pollution from the land utilization point of view. According to the result of this simulation, air quality of the city was found to be affected significantly by human activities. More populated area showed worse level of air quality. Any development in the city resulted in more automobile activity and deterioration of air quality. This simulation result thus explains that a rapid increase of automobiles accompanied by the land development near local roadsides in the city is the major cause of air pollution in Siheung city. In this study, if urban activities are vigorous in an area with high air pollution, people are more likely to be exposed to air pollutant under the bad environmental conditions. On the other hand, if urban activities are less vigorous in an area with high pollution or if urban activities are vigorous in an area with less pollution, the environmental condition was positive. The APEI (Air Pollution Exposure Index) was developed based on these considerations. Scenarios 1 and 2 were compared and analyzed using APEI. In result, scenario 1 is the case in which land is developed and used in an environmentally favorable manner. From this study, it was proved that the impact of air pollution on human health can be minimized with proper land use. The result form the current study can be used as the basic information to solve problems from improper land utilization and air pollution (by road traffic). It also can be utilized to evaluate air pollution level according to land use and road characteristics and to help to choose the best location of land use to comply with the road function and status.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4951-4957
• /
• 2016

Background: Apart from reducing occupational exposure to cytotoxic hazards, the PhaSeal(R) closed-system transfer device (CSTD) can extend the beyond-use dates (BUDs) of unfinished vials of antineoplastic drugs for up to 168 hours (seven days). In this study, the total material cost incurred by its use in a Malaysian government-funded hospital was calculated. Methods: A list of vial stability following initial needle punctures of 29 commonly-used antineoplastic drugs was compiled. The amount of the materials used, including drugs, infusion bottles, the PhaSeal(R) CSTD and other consumables, was recorded on a daily basis for three months in 2015. The total cost was calculated based on the actual acquisition costs, and was compared with that of a hypothetical scenario, whereby conventional syringe-needle sets were used for the same amounts of preparations. Results: The use of the PhaSeal(R) CSTD incurred a cost of MYR 383,634.52 (USD 92,072.28) in three months, representing an average of MYR 170.5 (USD 40.92) per preparation or an estimated annual cost of MYR 1,534,538.08 (USD 368,289.14). Compared with conventional syringe-needle approach, it is estimated to lead to an additional spending of MYR 148,627.68 (USD 35,670.64) yearly. Conclusion: Although there was a reduction of drug wastage achieved by extending BUDs of unfinished vials using the PhaSeal(R) CSTD, cost saving was not observed, likely attributable to the wide use of lower-priced generic drugs in Malaysia. Future studies should further evaluate the possibility of cost saving, especially in health settings where branded and high-cost antineoplastic drugs are more commonly used.

• Journal of Distribution Science
• /
• v.18 no.3
• /
• pp.87-97
• /
• 2020

Purpose: The aim of this study is to understand the internal and external responses that consumers experience when they are exposed to an innovative system in retail stores. This study considered the SST(Self-Service Technology) system in a retail setting as a type of functional environmental stimuli and selected a smart shopping cart as an example of SST system. The influences of functional environmental stimuli on consumers' emotional, cognitive, and behavioral responses were examined by applying S-O-R model. In addition, this study attempted to extend the traditional S-O-R model by (a) incorporating personal characteristics variables such as time pressure and perceived crowding and (b) considering not only emotional but also cognitive aspects of consumers' internal responses. Research Design, Data, and Methodology: This study used a video-scenario technique. Participants watched a video about grocery shopping situations using a smart shopping cart and responded to their emotional, cognitive, and behavioral responses. An online survey was conducted using Amazon's Mechanical Turk (N = 185). All participants were US consumers over 20 years old and had been shopping at the grocery store in the last month. Data were analyzed through structural equations modeling with AMOS 20. Results: Test results showed that consumers who perceived higher levels of time pressure and perceived crowding in usual shopping situations were more likely to evaluate the SST system favorably. The results showed that personal characteristics have a significant impact on consumers' evaluation of functional environmental stimuli in retail setting. As consumers evaluated the SST system favorably, they experienced more positive affect and less negative affect during their shopping behaviors. Positive affect led to good service quality inference, which further increased patronize intention. However, negative affect did not show a significant impact on service quality inference, but only on patronize intention. Conclusions: This study attempted to investigate the influence of SST system by extending the traditional S-O-R model. This study classified the SST system as functional environmental stimulus of retail stores and analyzed the effect of stimulus on consumers' internal and external responses. The results of this study showed that the introduction of innovative SST can serve as an effective store differentiation strategy in an increasingly competitive retail environment.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.5-13
• /
• 2014

This paper introduces emergy(spelled with "m") that is a new environmental indicator in architecture, aiming to clarify conflicting claims of building design components in the process of energy-retrofit. Much of design practitioners' attention on low energy use in operational phases, may simply shift the lowered environmental impact within the building boundary to large consumption of energy in another area. Specifically, building energy reduction strategies without a holistic view starting from natural formation, may lead to the depletion of non-renewable geobiological sources (e.g. minerals, fossil fuels, etc.), which leaves a building with an isolated energy-efficient object. Therefore, to overcome the narrow outlook, this research discusses the total ecological impact of a building which embraces all process energy as well as environmental cost represented by emergy. A case study has been conducted to explore emergy-driven design work. In comparison with operational energy-driven scenarios, the results elucidate how energy and emergy-oriented decision-making bring about different design results, and quantify building components' emergy contribution in the end. An average-size ($101.9m^2$) single family house located in South Korea was sampled as a benchmark case, and the analysis of energy and material use was conducted for establishment of the baseline. Adoption of the small building is effective for the goal of study since this research intends to measure environmental impact according to variation of passive design elements (windows size, building orientation, wall materials) with new metric (emergy) regardless of mechanical systems. Performance simulations of operational energy were developed and analyzed separately from the calculation of emergy magnitudes in building construction, and then the total emergy demand of each proposed design was evaluated. Emergy synthesis results verify that the least operational energy scenario requires greater investment in indirect energy in construction, which clearly reveals that efficiency gains are likely to be overwhelmed by increment of material flows. This result places importance on consideration of indirect energy use underscoring necessity of emergy evaluation towards the environment-friendly building in broader sense.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.223-231
• /
• 2005

A quantitative risk assessment tool was used to provide estimates of the probability that foot-and-mouth (FMD) virus-contaminated, smuggled animal products are fed to susceptible swine in Korea. Sensitivity analyses were conducted to attempt to distinguish between parameter uncertainty and variability, using different assumptions on the effect of cooking at home, the effect of the fresh meat, and the effect of heat treatment at garbage processing facility. The median risk estimate was about 20.1% with a mean value of 27.4%. In a scenario regarding all beef and pork were considered as fresh meat the estimated median risk was 3.4%. The risk was greatly dependent on the survival parameters of the FMD virus during the cooking or heat treatment at garbage processing facility. Uncertainty about the proportion of garbage that is likely contaminated with FMD had a major positive influence on the risk, whereas conversion rate representing the size of a load had a major negative effect. This model was very useful in assessing the risk explored. However, the model also requires enhancements, such as the availability of more accurate data to verify the various assumptions considered such as FMD prevalence in a specific country, proportion of garbage which is recycled as feed, proportion of food discarded as garbage. Other factors including the effect of selection of animals for slaughter, ante- and post-mortem inspection, the domestic distribution of the smuggled products, and susceptible animals other than pigs, are need to be taken into account in the future model development.

• Journal of Distribution Science
• /
• v.14 no.9
• /
• pp.111-120
• /
• 2016

Purpose - This study aimed to investigate the effects of customer relationship quality and perceived power on complaint behaviors in a context of service failures in a restaurant. Two different types of complaint behaviors were employed: personal complaining that disappointed customers directly approach to a service manager and public complaining that customers ask for related institutions, like consumer protection organization, for help. This study also examined the moderation effects of brand reputation on the relationships between customer perceived power and two types of complaint behaviors. Research design, data, and methodology - The author developed a structural model in which customer relationship quality is proposed to affect customer perceived power, thus influencing personal and public complaint behaviors. The model also includes the moderating role of brand reputation; the effect of customer perceived power on two types of complaint behaviors becomes stronger when brand reputation is high. To analyze the research model, a survey based on a scenario regarding the contexts of service failures in a restaurant was conducted toward 126 female college students. SPSS 22.0 and AMOS 21.0 were utilized to test the hypotheses. Results - The findings are as follows. First, customers who had positive relationships with a restaurant are more likely to perceive that they have strong power to influence the service provider. Second, customer perceived power had a significant and positive effect on both personal and public complaint behaviors. Finally, when the brand reputation for a restaurant is high, dissatisfied customers who think they can exercise influence to the restaurant complain more actively toward the service provider. Conclusions - The findings of this study are against the traditional viewpoint on customer loyalty that loyal customers compared respond more generously to the mistakes of a company, but consistent with the 'love becomes hate' effect proposed by Grégoire, Tripp, and Legoux(2009). In complaining contexts, companies should manage customers with positive and strong relationship more carefully and strategically to prevent the expansion of economic and social risks from customers' complaining behaviors. This is more significant for companies with strong brand reputations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.245-248
• /
• 2011

Voice over Internet protocol(VoIP) is call's contents using the existing internet. Thus, in common with the Internet service has the same vulnerability. In addition, unlike traditional PSTN remotely without physical access to hack through the eavesdropping is possible. Cyber terrorism by anti-state groups take place when the agency's computer network and telephone system at the same time work is likely to get upset. In this paper is penetration testing for security threats(Call interception, eavesdropping, misuse of services) set out in the NIS in the VoIP. In addition, scenario writing and penetration testing, hacking through the Voice over Internet protocol at the examination center will study discovered vulnerabilities. Vulnerability discovered in Voice over Internet protocol presents an attack and defense plan.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.499-510
• /
• 2011

Any server offering a routing service in the Internet would naturally be in competition for clients, and clients may need to utilize service from a specific server in order to achieve a desired result. We study the various properties of this competition, such as the fraction of route requests handled by a routing service provider and the fraction of total revenue obtained. As the routing service providers (i.e., servers or routers in this context) compete, they may alter behavior in order to optimize one of the above properties. For example, a service provider may lower the price charged for its service, in order to increase the number of clients served. Our models are based on servers offering a routing service to clients within representative network topologies based on actual Internet sub-graphs. These models provide, a framework for evaluating competition in the Internet. We monitor key aspects of the service, as several variables are introduced into the models. The first variable is the fraction of client requests that will pay more for a better quality route. The remaining requests are normal client requests that are satisfied by the most economical route. The second variable is the fraction of servers who choose to lower service prices in order to maximize the number of client requests served. As this fraction increases, it is more likely that a server will lower the price. Finally, there are some resource constraints applied to the model, to increase the difficulty in providing a routing solution, i.e., to simulate a realistic scenario. We seek to understand the effect on the overall network, as service providers compete. In simple cases, we show that this competition could have a negative impact on the overall efficiency of a service. We show that the routing variety present in the larger models is unable to mask this tendency and the routing service performance is decreased due to competition.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.679-690
• /
• 2013

Smartphones have features that users feel free to install/delete the program they want. Their emergence makes many developers rush into the Smartphone application development market. Thus, developing good applications quickly is becoming even more intense competition in the market. Because, however, the application development and deployment procedures are simple in the Android environments and anyone can participate in the development easily, applications not validated thoroughly are likely to be deployed. Therefore, a systematic approach that can verify Android-based applications with fewer burdens is required. In this paper, we propose a method that generates automatically GUI-based testing scenarios for the Android applications. The automated test scenario generation can reduce the time which the developer spends on testing, thus it can improve the productivity of the development in the testing phase.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.407-407
• /
• 2019

According to Asian Development Bank report Pakistan is among water scarce countries. Climate scenario on the basis IPCC fifth assessment report (AR5) revealed that annual mean temperature of Pakistan from year 2010-2019 was $17C^o$ which will rise up to $21C^o$ at the end of this century, similarly almost 10% decrease of annual rainfall is expected at the end of the century. It is a changing task in underdeveloped countries like Pakistan to meet the water demands of rapidly increasing population in a changing climate. While many studies have tackled scarcity and stream flow forecasting of the Upper Indus Basin (UIB) Pakistan, very few of them are related to socio-economic and climate change impact on sustainable water management of UIB. This study investigates the pattern of current and future surface water availability for various demand sites (e.g. domestic, agriculture and industrial) under different socio-economic and climate change scenarios in Upper Indus Basin (UIB) Pakistan for a period of 2010 to 2050. A state-of-the-art planning tool Water Evaluation and Planning (WEAP) is used to analyze the dynamics of current and future water demand. The stream flow data of five sub catchment (Astore, Gilgit, Hunza, Shigar and Shoyke) and entire UIB were calibrated and validated for the year of 2006 to 2011 using WEAP. The Nash Sutcliffe coefficient and coefficient of determination is achieved ranging from 0.63 to 0.92. The results indicate that unmet water demand is likely to increase severe threshold and the external driving forces e.g. socio-economic and climate change will create a gap between supply and demand of water.