• Journal of Life Science
• /
• v.16 no.6
• /
• pp.960-963
• /
• 2006

The purpose of this study is to evaluate the different type of exercise training on the changes of blood variables and leptin in SD rats. For this study, SD rats were divided into three groups: control group (CG: n=10), swim trained group (SG: n=10), and treadmill trained group (TG: n=10). The animals were housed in a pathogen-free animal facility ($22-24^{\circ}C$, 50-60% relative humidity, 08:00-20:00 lighting hours) at D university animal center, Pusan, Korea). Food and water were available ad libitum. The trained rats underwent a 8-wk endurance swim training (5 times/wk) in water at $26-29^{\circ}C$ (SG) and treadmill training (5 times/wk) in DAEJONG treadmill for 60 min. All data were expressed as mean and standard deviation by using SPSS package program (ver 10.0). The result through the statistical analysis of this data were summarized as follows: 1. In the weight changes, there were significant differences among CG, SG and TG(p<.05) after regular swim and treadmill training. TG showed the lowest weight than the other groups. 2. In the epididymal & perirenal adipose tissue levels, there were significant differences among CG, SG and TG(p<.05) after regular swim and treadmill training. TG showed the lowest adipose tissue levels than the other groups. 3. In the triglyceride changes, For the SG and TG, there were significantly decreased after regular swim and treadmill training. TG showed the lowest triglyceride levels than the other groups. 4. In the insulin hormone, For the SG and TG, there were significantly decreased after regular swim and treadmill training. TG showed the lowest insulin levels than the other groups. 5. In the leptin changes, For the SG and TG, there were significantly decreased after regular swim and treadmill training. TG was the lowest than the other groups. Based on the results, Regular swim and treadmill training decrease body weight, epididymal & perirenal adipose tissue levels significantly, this is caused but by decreased triglycerides, insulin, and leptin hormone levels not by the other factors. Regular treadmill training decreased insulin hormone levels compare to swim training, however there was no direct insulin effect on the weight changes. and it might be the direct effect of leptin hormones.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.24-32
• /
• 2008

The ultimate purpose of the study is to develop a discomfort glare forecasting formula that can be practically used in Korea in order to effectively forecast discomfort glare considering the optical characteristics of the Koreans. The study was to examine the relations between discomfort glare and the variables such as luminance, background luminance, solid angle, luminous area and louver. To this end, experiments were conducted in a mock-up office that emulates the lighting environment of an ordinary office. The study was conducted by four steps as follow. First, previous studies on discomfort glare rating to define and rate discomfort glare were analyzed and modified to be applied to the experiments of this study. Second, experiment variables, variable scope, evaluation objects and evaluation points were determined after review on existing discomfort glare evaluation experimental formulas. Third, experiments were conducted in a mock-up office to be able to control variables. Finally, sensitivity of experiment variables were analyzed through examination of the relation between discomfort glare and the variables such as luminance, solid angle, louver, luminous area and subject's position. The result showed that the most influential variables on discomfort glare of an artificial light source is luminance and louver, luminous area and subject's position(solid angle) followed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2016

This study evaluated a digital locking device design using detection distance of 13.4mm of a human body sensing type magnetic field coil. In contrast to digital locking devices that are used nowadays, the existing serial number entering buttons, lighting, number cover, corresponding pcb, exterior case, and data delivery cables have been deleted and are only composed of control ON/OFF power switches and emergency terminals. When the magnetic field coil substrates installed inside the inner case detects the electric resistance delivered from the opposite side of the 12mm interval exterior contacting the glass body part, the corresponding induced current flows. At this time, the magnetic field coil takes the role as a sensor when coil frequency of the circular coil is transformed. The magnetic coil as a sensor detects a change in the oscillation frequency output before and after the body is detected. This is then amplified to larger than 2,000%, transformed into digital signals, and delivered to exclusive software to compare and search for embedded data. The detection time followed by the touch area of the body standard to a $12.8{\emptyset}$ magnetic field coil was 30% contrast at 0.08sec and 80% contrast at 0.03sec, in which the detection distance was 13.4mm, showing the best level.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.117-130
• /
• 2011

The purpose of this study is to produce a better way to detect crossroad accidents, which involves an efficient method to produce background images in consideration of object movement and preserve/demonstrate the candidate accident region. One of the prior studies proposed an employment of traffic signal interval within crossroad to detect accidents on crossroad, but it may cause a failure to detect unwanted accidents if any object is covered on an accident site. This study adopted inverse perspective mapping to control the scale of object, and proposed different ways such as producing robust background images enough to resist surrounding noise, generating candidate accident regions through information on object movement, and by using edge information to preserve and delete the candidate accident region. In order to measure the performance of proposed algorithm, a variety of traffic images were saved and used for experiment (e.g. recorded images on rush hours via DVR installed on crossroad, different accident images recorded in day and night rainy days, and recorded images including surrounding noise of lighting and shades). As a result, it was found that there were all 20 experiment cases of accident detected and actual effective rate of accident detection amounted to 76.9% on average. In addition, the image processing rate ranged from 10~14 frame/sec depending on the area of detection region. Thus, it is concluded that there will be no problem in real-time image processing.

• Korean Journal of Poultry Science
• /
• v.42 no.3
• /
• pp.205-214
• /
• 2015

This study aimed to investigate the effects of reducing feed intake on performance and meat quality in old laying hens. A total of 200 Hy-Line Brown laying hens (100 weeks old) were randomly allotted to five dietary treatments: control (100% daily feed intake), 90%, 60%, 50%, and 20% daily feed intake. Each treatment was replicated four times with 10 birds per replication and two birds per cage. Ten-bird units were arranged according to a randomized block design. The feeding trial lasted for 4 weeks under a 16L:8D lighting regimen. The results indicated that the daily feed intake correlated with hen-day egg production and feed conversion ratios (P<0.05). The carcass yields and partial ratios were also correlated with daily feed intake (P<0.05). The levels of leukocytes (without basophils) were higher in the 50% and 20% daily feed intake groups than in the other groups. The concentrations of dry matter, crude ash, crude fat, and crude protein, water holding capacity, cooking loss, and fatty acids in the breast meat did not decrease as the daily feed intake decreased. In conclusion, reducing daily feed intake decreased laying performance and carcass yield but had no effect on breast meat quality.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.123-127
• /
• 2013

A new spray chrysanthemum (Dendranthema grandiflorum) 'Blue Hope' was bred by the Flower Research Institute, Gyeongsangnam-do Agricultural Research & Extension Services in 2009. The cultivar 'Blue Hope' was initially derived from the cross in 2005 between 'Ford', a spray chrysanthemum cultivar, with white anemone type, and 'Chopin', a spray chrysanthemum cultivar with white anemone type. The cultivar has anemone type with white petals. After the evaluation of the characteristics under shade culture in summer and retarding culture in spring and consecutive selection from 2007 to 2009, 'Blue Hope' was selected finality. The natural flowering time of 'Blue Hope' was October 24th, and year-round flowering is possible by shading or lighting treatment. The growth of plant was very vigorous and response time 6.5 weeks. The diameter of flower was 4.9 cm. Number of flowers per stem was 19.1 in autumn. Days to flowering under the short day treatment was about 45 in spring and its vase life was 23.8 days in the autumn season. This cultivar was resistance white rust and consumer's preference of new spray is high level than the control.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.23-35
• /
• 2006

This work presents o novel method which extract facial region und features from motion picture automatically and controls the 3D facial expression in real time. To txtract facial region and facial feature points from each color frame of motion pictures a new nonparametric skin color model is proposed rather than using parametric skin color model. Conventionally used parametric skin color models, which presents facial distribution as gaussian-type, have lack of robustness for varying lighting conditions. Thus it needs additional work to extract exact facial region from face images. To resolve the limitation of current skin color model, we exploit the Hue-Tint chrominance components and represent the skin chrominance distribution as a linear function, which can reduce error for detecting facial region. Moreover, the minimal facial feature positions detected by the proposed skin model are adjusted by using edge information of the detected facial region along with the proportions of the face. To produce the realistic facial expression, we adopt Water's linear muscle model and apply the extended version of Water's muscles to variation of the facial features of the 3D face. The experiments show that the proposed approach efficiently detects facial feature points and naturally controls the facial expression of the 3D face model.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.339-353
• /
• 2003

The rapid increase in food borne illness outbreaks in Korea has been one of the major threats to the Nation's Health. Foodservice establishments have been identified as the major place for these outbreaks, mainly due to the lack of sanitary management and sanitary facility management practices. The purposes of the study were to develop hospital foodservice facility evaluation tools, based on the general HACCP-based standards and guidelines, for hospital food service establishments, to ensure the safety of these foodservices and to reduce the risk of food home illness. The scope of this study included: 1) an assessment of the current foodservice sanitation practices and managements for 6 general hospitals, with more than 400 beds, and 3 general hospitals, with less than 400 beds; 2) the development of foodservice establishments sanitation evaluation tools and sanitation standards, based on the HACCP system. The survey data showed varied results between the hospitals surveyed. Most of the hospital foodservice operations had many problems with ventilation and the plumbing. The total dimensional mean scores for the hospitals with more than 400 beds and less than 400 beds were 31.5 and 27.0, respectively. The highest dimension scores were for the water supply facility and lighting, with the lowest for insect and rodent control and toxic materials management. The levels of the mean scores were very low, especially for the general hospitals with less than 400 beds. These low mean scores may have arisen from critical problems within the hospital foodservice operations. The most needed facility management items for improvement were: storage shelf should be spaced 6 inches from the floor and walls, the use of three compartment sinks, utility sinks and cleaning facilities, with a floor drain for cleaning mops or liquid wastes, a ventilation hood designed to prevent dripping onto food, cooking facilities should be disassembled for washing and sanitizing, a separated hand washing sink and a sanitized food board for each area should be provided, all toxic material must have warning labels attached, and be stored in an area away from food preparation under padlock. The evaluation tool consisted of 14 dimensions, with 65 check-off items. The results of this study will provide basic facilities' guidelines to regulators, or foodservice industry personnel, wishing to build, or expend, and establish an efficient flow of food. As a result, food borne illnesses will be effectively prevented, and the Nation's health will be promoted for the development of their own sanitation standards, with a checklist for the safe production of foods.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.23-27
• /
• 2010

The control of stem length is most important external quality aspect in cut chrysanthemum. The present work in conducted in growth chamber and aims at investigating the effect of light intensity on the photosynthesis capacity and stem elongation in cut chrysanthemum. To evaluate the effect, different level of assimilation lighting (LEDs) was given to canopy level 60, 100, 140, and $180mol{\cdot}m^{-2}{\cdot}s^{-1}$, individually, under short-day conditions, and the light treatments were initiated from 7days after planting. There was a positive linear-regression relationship between the light intensity and the net assimilation rate. On the other hand, there was not significant difference in flower buds induction. The growth of stem length, leaf area, and dry weight was increased by increasing the light intensity, whereas the plants grown under 140 and $180mol{\cdot}m^{-2}{\cdot}s^{-1}$ was not differences in those of growth. It indicates that the increased net assimilation rate is not continually coincided with the maximized growth in cut chrysanthemum. It might be considered that the optimal light intensity for stem elongation of cut chrysanthemum is $140mol{\cdot}m^{-2}{\cdot}s^{-1}$ under short-day condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.273-281
• /
• 2019

The energy consumed by buildings among the total national energy consumption is more than 10% of the total. For this reason, Korea has adopted the zero energy building policy since 2025, and research on the energy saving technology of buildings has been demanded. Analysis of buildings' energy consumption patterns shows that lighting, heating and cooling energy account for more than 60% of total energy consumption, which is directly related to solar power acquisition and window opening and closing operation. In this paper, we have developed a low - power IoT sensor module for window system to transfer acquired information to building energy management system. This module transmits the external environment and window opening / closing status information to the building energy management system in real time, and constructs the network to actively take energy saving measures. The power used in the module is designed as an independent power source using solar power among the harvest energy. The topology of the power supply is a Buck converter, which is charged at 4V to the lithium ion battery through MPPT control, and the efficiency is about 85.87%. Communication is configured to be able to transmit in real time by applying WiFi. In order to reduce the power consumption of the module, we analyzed the hardware and software aspects and implemented a low power IoT sensor module.