• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.267-276
• /
• 2009

Nowadays, numerous of valuable internet services are available not only for personal computer but also for mobile appliances in wireless network environment. Therefore, as the amount of contents is increased for those services, the storage limitation on mobile devices has became a significant issue. In this paper, we present a new block-level storage network protocol, iATA (Internet Advanced Technology Attachment) as a solution to the above problem. iATA is designed to transport ATA block-level data and command over the ubiquitous TCP/IP network. With iATA, a mobile appliance is able to access and control the ATA storage devices natively through network from anywhere and at anytime as if the storage devices is attached locally. We describe the concepts, design and diverse consideration of iATA protocol. Based on the benchmark experiments and application exploitation, we strongly believe that iATA as a light-weight protocol is efficient and cost-effective to be used as a storage network protocol on a resource limited device that utilizes common-off-the-shelf storage hardware and existing IP infrastructure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.661-669
• /
• 2021

A mechanical stiffener has been mainly applied on a PCB to secure fatigue life of a solder joint of an electronic components in spaceborne electronics by minimizing bending displacement of the PCB. However, it causes an increase of mass and volume of the electronics. The high damping PCB implemented by multi-layered viscoelastic tapes of a previous research was effective for assuring the fatigue life of the solder joint, but it also has a limitation to decrease accommodation efficiency for the components on the PCB. In this study, we proposed high damping PCB with a multi-layered superelastic shape memory alloy stiffener for spatialminimized, light-weighted, high-integrated structure design of the electronics. To investigate the basic characteristics of the proposed PCB, a static load test, a free vibration test were performed. Then, the high damping characteristic and the design effectiveness of the PCB were validated through a random vibration test.

• 한국사회정책
• /
• v.25 no.2
• /
• pp.3-29
• /
• 2018

By examining care from a normative perspective projected in the Constitution of South Korea, this paper attempts to assess care from the standpoint of justice and establish the status of care as a concrete political value. The point that this paper focuses on in the Constitution is about the "human worth and dignity" and "right to pursue happiness" clauses of the Article 10 at the beginning of Chapter II which defines the rights and duties of citizens. The clauses of "human worth and dignity" and the "right to pursue happiness" are generally interpreted as the highest values of the constitutional order. While exploring the human dignity and the pursuit of happiness clauses in light of care, this paper intends to address the value of care as human dignity, which is the highest ideology and constitutional principle of the Constitution and, at the same time, the limitation of explaining the freedom to care with a liberal concept of freedom implied in the pursuit of happiness. Ultimately, this paper argues for the justification of putting 'care' in the Constitution. In the end, this paper aims to emphasize the significance of care as a guiding principle for the maintenance of our lives and society, a primary principle of social regulation and public governance, and a direction for a just state which can identify and rectify care injustices.

• Journal of the Korean earth science society
• /
• v.40 no.5
• /
• pp.464-475
• /
• 2019

We measured night sky brightness (NSB) over the downtown using a Digital Single Lens Reflex (DSLR) camera combined to a small telescope for educational purpose, considering that most secondary schools are located in urban areas and have limitation in the equipment for astronomical observation. Raw format images from DSLR camera are not affected by various camera settings except for the ISO, and the typical photometric uncertainty including filter transformation is about 0.1 mag. Near the zenith, the NSB of the B, V, and r-band is 17.5, 17.1, and $16.9mag\;arcsec^{-2}$, respectively. The approximate limiting magnitude is derived to be 17.5 mag at B-band and 17 mag at V, r-band. A large scale artificial light close to the observation site is the dominant cause for making observing condition worse, increasing the NSB by $0.6mag\;arcseec^{-2}$ regardless of the altitude and filter.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.379-384
• /
• 2021

A microneedle is a tool that used for drug delivery and diagnosis. Unlike general injections, the microneedle is short in length, enabling effective drug delivery while minimizing pain and risk of infection. Conventionally, microneedles have been manufactured precisely at a nanometer level based on microelectro mechanical systems (MEMS) technology, requiring expensive equipments & maintenance and complicated processes. To address the issues, 3D printing research has been conducted to fabricate microneedles simply, economically, and rapidly. Since 3D printing facilitates to manufacture prototypes and apply feedbacks, it is advantageous for the development and commercialization of microneedle for pharmaceuticals and cosmetics. Therefore, this review will introduce stereolithography (SLA), two-photon polymerization (2PP), dynamic light processing (DLP), continuous liquid interface production (CLIP), and fused deposition modeling (FDM) 3D printing technologies and also highlight research trends for microneedle production using them. Furthermore, the limitation of the current microneedle technology and the direction to be solved in the future will be discussed.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.844-851
• /
• 2021

Due to the increase in consumers' interest about well-being, interest in eco-friendly products has been increasing due to the harmful effects of various harmful substances contained in textile products and environmental issues. As a result, natural dyes of less potential risk than synthetic dyes and digital textile printing(DTP) textile products with less environmental pollution are drawing attention. However, due to the lack of evaluation criteria for DTP textile products with natural ink and the nature of many colors are stacked layer by layer for dying, the need for simultaneous analysis is emerging. To evaluate whether the natural dye is derived from natural ingredients, the biocarbon content is analyzed. However, in the case of ink made using natural dyes and DTP textile products using natural ink, it is difficult to analyze the biocarbon content due to the limitation of the presence of a small amount of dye contained therein. In this study, we were shown the possibility of natural derived verification by cross-checking the analytes of natural dyes (Persicaria tinctoria, an indigo dye; Dactylopius coccus, a light red; and Curcum longa L., i.e., turmeric) and natural ink with HPLC-MS/MS. The coefficient of determination was 0.999 or higher, the limit of quantification was 0.647-3.664 ㎍/L and a %RSD of each indicator material was less than 10. Then, the extraction amount of natural dyes for five patterned fabrics was analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.103-108
• /
• 2023

In this paper, a performance enhancement study of an AESA antenna that can be applied to a seeker that serves as the eye of a missile was conducted, and the performance of the antenna was verified through actual measurement. When designing an AESA antenna, the optimization of the active reflection coefficient must be considered during transmission due to the mutual coupling between radiators that inevitably occurs, and the selection of a radiator that can overcome the space limitation of the seeker with a small size/light weight is an important design consideration. Accordingly, optimization in terms of electrical performance and low-profile structure is required through research on array antennas for application to the AESA structure. The radiator designed and measured in this paper was designed as an SFN that can satisfy the low-profile structure while enhancing the performance of a general vivaldi antenna. Through this paper, it was confirmed that SFN has the same broadband characteristics as general vivaldi antennas and has optimized characteristics required for AESA antennas. The structure optimized through simulation confirmed the pattern characteristics and active reflection coefficient characteristics through the fabrication of actual proto-type antennas.

• Information Systems Review
• /
• v.22 no.4
• /
• pp.115-134
• /
• 2020

Previous studies on willingness to pay for digital content have mainly focused on audience factors and individual level. To complement the limitation of previous research, this study conducts a multilevel analysis to find the factors influence digital content purchases considering two axes: audience/media factors and individual/household levels. Using a sample of 10,172 individuals within 4,313 households, the analysis results show individual media factors including theater-going, experience with cloud services, and multi-screen service usage have the greatest effects on digital content purchases. At the household level, the media ownership factors that the number of laptops, wireless routers, and tablets have a greater influence than audience factors such as household size or household income. Our findings help scholars to enhance the understanding of individuals' media use considering household environmental factors and shed light on the importance of multi-screen service usage, and content providers to improve their digital content sales using multi-screen environment.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.605-619
• /
• 2019

The objective of this study was to analyze eutrophication characteristics, empirical model analysis, and variation of water quality according to monsoon intensity in Hapcheon Reservoir for 16 years from 2002 to 2017. Long-term annual water quality analysis showed that Hapcheon Reservoir was in a meso-nutrition to eutrophic condition, and the eutrophic state intensified after the summer monsoon. Annual rainfall volume (high vs. low rainfall) and the seasonal intensity in each year were the key factors that regulate the long-term water quality variation provided that there is no significant change of the point- and non-point source in the watershed. Dry years and wet years showed significant differences in the concentrations of TP, TN, BOD, and conductivity, indicating that precipitation had the most direct influence on nutrients and organic matter dynamics. Nutrient indicators (TP, TN), organic pollution indicators (BOD, COD), total suspended solids, and chlorophyll-a (Chl-a), which was an estimator of primary productivity, had significant positive relations (p<0.05) with precipitation. The Chl-a concentration, which is an indicator of green algae, was highly correlated with TP, TN, and BOD, which differed from other lakes that showed the lower Chl-a concentration when nutrients increased excessively. Empirical model analysis of log-transformed TN, TP, and Chl-a indicated that the Chl-a concentration was linearly regulated by phosphorus concentration, but not by nitrogen concentration. Spatial regression analysis of the riverine, transition, and lacustrine zones of $log_{10}TN$, $log_{10}TP$, and $log_{10}CHL$ showed that TN and Chl-a had significant relations (p<0.005) while TN and Chl-a had p > 0.05, indicating that phosphorus had a key role in the algal growth. Moreover, the higher correlation of both $log_{10}TP$ and $log_{10}TN$ to $log_{10}CHL$ in the riverine zone than the lacustrine zone indicated that there was little impact of inorganic suspended solids on the light limitation in the riverine zone.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.1
• /
• pp.69-84
• /
• 1997

Background : Although the overall prognosis of patients with lung cancer is poor, highly effective treatment exists for the small subset of patients with early lung cancer(carcinoma in situ/micro- invasive cancer). But very few patients have benefit from them because these lesions are difficult to detect and localize with conventional white-light bronchoscopy. To overcome this problem, a Lung Imaging Fluorescence Endoscopic device(LIFE) was developed to detect and clearly delineate the exact location and extent of premalignant and early lung cancer lesions using differences in tissue autofluorescence. Purpose : The purpose of this study was to determine the difference of sensitivity and specificity in detecting dysplasia and carcinoma between fluorescence imaging and conventional white light bronchoscopy. Material and Methods : 35 patients (16 with abnormal chest X-ray, 2 with positive sputum study, 2 with undiagnosed pleural effusion, 15 with respiratory symptom) have been examined by LIFE imaging system. After a white light bronchoscopy, the patients were submitted to fluorescence bronchoscopy and the findings of both examinations have been classified in 3 categories(class I, II, III). From of all class n and III sites, 79 biopsy specimens have been collected for histologic examination: a comparison between histologic results and white light or fluorescence bronchoscopy has been performed for assessing sensitivity and specificity of the two methods. Results : 1) Total 79 sires in 35 patients were examined. Histology demonstrated 8 normal mucosa, 21 hyperplasia, 23 dysplasia, and 27 microinvasive and invasive carcinoma. 2) The sensitivity of white light or fluorescence bronchoscopy in detecting dysplasia was 60.9% and 82.6%, respectively. 3) The results of this study showed 70.3 % sensitivity for microinvasive or invasive carcinoma with LIFE system, versus 100% sensitivity for white light in 27 cases of carcinoma. The false negative study of LIFE system was 8 cases(3 adenocarcinoma and 5 small cell carcinoma), which were infiltrated in submucosal area and had normal epithelium. Conclusion : To improve the ability 10 diagnose and stage more accurately, fluorescence imaging may become an important adjunct to conventional bronchoscopic examination because of its high detection rate of premalignant and malignant epithelial lesion. But. it has limitation to detect in submucosal infiltrating carcinoma.