• Applied Microscopy
• /
• v.27 no.2
• /
• pp.155-163
• /
• 1997

Ultrastructural and histochemical studies were carried out on the prostate gland of a Korean slug (Incilaria fruhstorferi) with light and electron microscopes. The results are as follows. The endothelial tissue of the prostate gland is constituted with tall and narrow ciliated columnar cells, irregularly shaped cells and gland cells in which are included the elongated oval or ellipsoid nucleus those are surrounded by curved membrane. The endothelial tissue of the prostate gland is composed by type-A, B, C and type-D gland cells, and the glanules of type-A, B, and D gland cells are certified to neutral mucopolysaccharide because are related by PAS-alcian blue (pH 2.5) , but the other hand type-C gland cell is only weakly reacted to PAS, but strongly reacted by Million reaction. The glanules of type-A gland cell are small size (about $0.4{\mu}m$) and are seen high electron density, but the glanules of type-B gland cell are large size (about $0.7{\mu}m$) and glanule density is same type-A glanules. Long ellipsoid type-C gland cell contained round nucleus which is well developed beterochromatin in, and that small oval glanules (size, about $0.9{\mu}m$) of moderate high electron density which are formed a group of large glanule together with $4\sim5ea$, but type-D gland cell possessed round small nucleus are seen high electron dense glanules (size, $0.8{\mu}m$).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.863-870
• /
• 2004

The temperature and soot particle measurement technique in a laminar diffusion flame has been studied to investigate the characteristics of soot particle with temperature using a co-flow burner. The temperature distribution in the flame were measured by rapid insertion of a R-type thermocouple and the soot particles by LEM/LIS techniques. In these measurement, soot volume fraction, number density and soot diameters were analyzed experimentally. As a results, the spacial distributions of particle volume fraction, soot diameter, and number density are mapped throughout the flame using the Rayleigh theory for the scattering of light by particles. A laser extinction method was used to measure the soot volume fraction and laser induced scattering method was used to measure the soot particle diameter and number density. Also, we measured temperature without the effect of soot particles attached to the thermocouple junction, which is close to the nozzle. In this result, we found that upstream zone has a unstable flowing in co-flow diffusion flame and the y-axis temperature of flame has a uniform temperature distribution in the most soot volume fraction zone.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1267-1273
• /
• 2004

The temperature and soot particle measurement technique in a laminar diffusion flame have been studied to investigate the characteristics of soot particle with temperature using a co-flow burner. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple and the soot particles were detected were detected by LEM/LIS techniques. In these measurement, soot volume fraction, number density and soot diameters were analyzed experimentally. As a results, the spacial distributions of particle volume fraction, soot diameter, and number density are mapped throughout the flame using the Rayleigh theory for the scattering of light by absorbing particles. A laser extinction method was used to measure the soot volume fraction and Laser induced scattering method was used to measure the soot particle diameter and number density. Also, we measured temperature without the effect of soot particles attached to the thermocouple junction, which is close to the nozzle. In this result, we found that upstream zone has a unstable flowing in co-flow diffusion flame and the y-axis temperature of flame has a uniform temperature distribution in the most soot volume fraction zone.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.111.1-111.1
• /
• 2012

We examine the relationship between a type II radio burst that started from an unusually high frequency of 425 MHz (fundamental component) and an associated white-light coronal mass ejection on 2011 February 13. The radio burst had a drift rate of 2.5 MHz/sec, indicating a relatively high shock speed. From SDO AIA observations we find that a loop-like erupting front sweeps across high density coronal loops near the start time of the burst (17:34:15 UT). We find fragmented structures of the type II burst, which indicates the signature of the shock propagating through the multiple loops. The deduced distance of shock formation (0.06 Rs) from flare center and speed of the shock (1100 km $s^{-1}$) using the measured density from AIA/SDO observations are comparable to the height (0.05 Rs, from the solar surface) and speed (700 km $s^{-1}$) of the CME leading edge observed by STEREO/EUVI. We conclude that the type II burst could be onset even in the low corona (41 Mm or 0.06 Rs, above the solar surface) if a fast CME shock passes through the high density loops.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.37-43
• /
• 1997

Density of a dye or pigment teduces by radiant energym and dinsity change induces color change. In this paper, we habe worked out an equation to predict the color change by the radiant energy under the assumption of colorant density changing pattern by radiant energy and the color changing pattern by colorant density chane. And the damaging factors in the equation was established by experiments. To evaluate the efectiveness of the equation and the method, several samples were irradiated by common light source and color change was measured. Good coincidence between the ceasured and the calculated color change was found. And it was also found that there is a close relationhaip between the spectral damaging factor and the spectral absorptance in visible wavelength range.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.848-852
• /
• 2008

Characteristics of microcrystalline-silicon thin-films deposited by plasma-enhanced chemical-vapor deposition (PECVD) method were studied. There were optimum values of RF power density and $H_2$ dilution ratio $(H_2/(SiH_4+H_2))$; maximum grain size of about 35 nm was obtained at substrate temperature of 250 $^{\circ}C$ with RF power density of 1.1 W/$cm^2$ and $H_2$ dilution ratio of 0.91. Larger grain was obtained with higher substrate temperature up to 350 $^{\circ}C$. Grain size dependence on RF power density and $H_2$ dilution ratio could be explained by etching effects of hydrogen ions and changes of species of reactive precursors on growing surface. Surface-mobility activation of reactive precursors by temperature could be a reason of grain-size dependence on the substrate temperature. Microcrystalline-silicon thin-films that could be used for flat-panel electronics such as active-matrix organic-light-emitting-diodes are expected to be fabricated successfully using these results.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.491-502
• /
• 1998

The present study was conducted to investigate the structural changes in rat cornea. Sixty eyes from one-day-old uneyed rats, fourty eyes from 4-weeks-old rats, and foully eyes from 10-weeks-old adult rats were used. With the increase of age, the epithelial layer was thickened by the addition of new successive cellular layers. Then, the new-born rat's epithelial cells formed a pentagonal shape, and the quality of decidual cells showed a high electron-density, although the boundary between cells was distinctive. The newly produced cells showed a low electron-density so that there was the distinctive difference between light and darkness. In Bowman's layer, collagen fibrils demonstrate a regularly arranged structure along with the age. In stroma's layer, the density of keratocytes was decreased and thereby Progressively flattened during the development. The collagenous layer of the adult rats was more distinctive than that of the new-born rats in a form of parallel alignment running vertically and horizontally.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.391-394
• /
• 2006

This paper presents soft switching zero voltage switching high frequency inverter for rare gas fluorescent lamp using dielectric-barrier discharge phenomenon. The simple high-frequency inverter can completely achieve stable zero voltage soft switching (ZVS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZVS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this high frequency Inverter are illustrated as compared with computer simulation results and experimental ones. Its light dimming characteristics due to power regulation scheme are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proven from the practical point of view.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.2
• /
• pp.100-107
• /
• 1994

This study was carried out to evaluate the effect of Cnidi rhizoma (CR) water extract on fat accumulation in fatted rats induced by the oral high fat administration for six weeks. Total cholesterol, neutral lipid and epididymal fat pad of CR groups were lower than the control group. On the other hand, high density lipoprotein(HDL) -cholesterol was somewhat higher In CR than In the control group. In addition, the same result as the above case was obtained when examining adipose for liver and epididymal fat components. During the feeding experiment, level of low density Lipoprotein(LDL) and very low density Lipoprotein (VLDL) increased while HDL was decreased. The degree of LDL and VLDL was decreased however, and HDL was, increased In CH groups as compared with the control group. Insulin and cortisol were higher than the control group, due to the fat accumulation. Experiment group showed the increased excretion as compared with the control group, in the excretion of bile acid and neutral sterol. The liver of the control group observed by the light microscope appeared to the fatty liver, but CR groups showed some improvement of the fatty liver. Based on the above results, it was shown that It Is possible to improve fat accumulation induced, by high fat dietary through using the oral administration of Cnidi rhizoma boiling extract solutions.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.344-352
• /
• 2024

Stretchable electronics are emerging as next-generation devices owing to their unique deformable characteristics, which allow their application on nonplanar and even deformable surfaces. However, to implement advanced functions in stretchable electronics, conventional rigid components must be integrated to reduce the overall stretchability of these systems. Various design strategies have been proposed to address this challenge. One notable approach involves dividing the electronics into nonstretchable regions for component integration and stretchable interconnector regions that absorb strain. However, stretchable interconnectors, which electrically connect nonstretchable circuits, may reduce the functional density of electronics. In this study, we present a design strategy for self-sensing stretchable electronics by embedding strain sensors within stretchable interconnectors. We provide both computational and experimental evidence demonstrating the advantages of this approach and validate the feasibility of the design by developing a stretchable light-emitting diode (LED) matrix with self-sensing capabilities for measuring the stretching ratio. The results presented herein offer valuable strategies for advancing applications that require stretchable electronics with high functional densities. Moreover, the self-sensing design approach has significant potential for application in proprioceptive electronics.