• Journal of the Korean Society for Railway
• /
• v.3 no.4
• /
• pp.185-193
• /
• 2000

In general, a third rail current collecting shoegear is widely used in the light rail transit system since it is more efficient and economical than an overhead pantograph. Therefore, its specification is prescribed in the Korean standard specifications for the light rail transit for its applications. This paper describes the development of the third rail current collecting shoegears which is suitable to Korean situation and satisfactory to the Korean standard specifications. Two types are developed for the steel wheel and the rubber tyred AGT system, and various experiments are executed. It is found that performance of the third rail current collecting shoegear developed is proved acceptable.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.375-383
• /
• 2007

To find out the affection of the sampling techniques to the result of a faunistic study, we surveyed the insect fauna of the Chungbuk National University (four different sites) for a year, from spring to fall. For each site, four different collecting methods: light trap, net sweeping, pitfall trap, and window trap, were applied and the collecting was done every other week for a total of 16 times. A total of 14 orders and 672 species were collected. 501 species were collected by the light trap, which covers about 75% of the total number of species, turn out to be the most effective, while other methods could only cover 18% or less. On average, only about 30% of the species collected at a given time of collecting were re-collected at the next collecting, which means about 70% of the species collected from the first collecting remains not collected in the next collecting if you collect insects every other week. The result suggests that, in addition to applying diverse collecting methods, frequent sampling, or narrow sample window, is another very important factor for a good representation of species diversity in an insect faunistic study.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.530-536
• /
• 1998

In the design of the light rail transit which is more reliable and economical, it is essential to develope a efficient third rail system. Especially, the analysis for the conductivity of conduct rail and the wear of collecting shoe is the first step of its development. In this paper, experiments for conductivity in conductor rail, wear in collecting shoe were performed respectively as different materials of conductor rail and current collector. Noise level and interruption, wear and contact resistance of collecting shoe were proposed as design parameters for the development of this system. Experimental equipment and methods of design parameter stated above were proposed, which is expected that analyzed results will be used as a basic data for the development of the system.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.618-625
• /
• 2000

In general, a third rail current collecting shoegear is used widely in the light rail transit system, which is more efficient than overhead pantograph. Therefore, Korean standard specifications for the light rail transit prescribes for the application of it. This paper describes the development of third rail current collecting shoegears, which is suitable to Korean situation and satisfied with Korean standard specifications, Two types are developed for steel wheel AGT system and rubber tyred AGT system, and various experiments are executed.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.455-457
• /
• 1999

In this paper, the wearing characteristics of current collecting shoes, interruption phenomena and contact resistances between collecting shoes and conductor rails are established as design parameters for development of the third rail current collector. An experimental analysis for established design parameters is performed as the materials of current collector shoe, contact force, sliding velocity and contact condition(dry/wet condition) between current collectors shoe and conductor rails. As a result of this study, the magnitude of contact force is in proportion to the amount of wear in the collecting shoe, but is in inverse proportion to the interruption and contact resistance between the collecting shoe and the conductor rail. And optimal values of design parameters are pre sented through analyzing the experimental results of the amount of wear, interruption and contact resistance.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1786-1788
• /
• 2001

A standard source was constructed, and then simulated its light distribution characteristics of the basic arrangements by shape, by angle, and by displacement. And it was constructed a light collecting holder of optical fiber lighting systems using RGB LED. As a result, we obtained the improving light collecting efficiency was improved 6.5 times with compared to existing systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.260-263
• /
• 2007

The importance of natural light in building is known by all of us who experienced dark rooms. The sunlight system is very important from energy saving and human welfare point of view. The system consists of light-collecting module, light -transporting module and light-emitting module. The light-collection is used light reflection mirror, a prism for lighting bent, and lens for light condensing. The transportation of collected sunlight is used polished duct, tube, pipe and specially used fiber optic cable. This paper investigate research and development trends of sunlight system for advanced product.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2058-2065
• /
• 2004

A light collecting probe named Multi-color Integrated Cassegrain Receiving Optics (MICRO) is applied to spark-ignited spherical spray flames to obtain the flame propagation speed in freely falling droplet suspension produced by an ultrasonic atomizer. Two MICRO probes are used to monitor time-series signals of OH chemiluminescence from two different locations in the flame. By detecting the arrival time difference of the propagating flame front, the flame propagation speed is calculated with a two-point delay-time method. In addition, time-series images of OH chemiluminescence are simultaneously obtained by a high-speed digital CCD camera to ensure the validity of the two-point delay-time method by the MICRO system. Furthermore, the relationship between the spray properties measured by phase Doppler anemometer (PDA) and the flame propagation speed are discussed with three different experimental conditions by changing the fuel injection rate. It was confirmed that the two-point delay-time method with two MICRO probes is useful and convenient to obtain the flame propagation speed and that the flame propagation speed depends on the spray properties.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.20-25
• /
• 2004

In order to obtain the flame Propagation speed in freely falling droplet suspension Produced by an ultrasonic atomizer, a light collecting probe named Multi-color Integrated Cassegrain Receiving Optics (MICRO) is applied to spark-ignited spherical spray flames. Two MICRO probes are used to monitor time-series signals of OH chemilumine-scence from two different locations in the flame. The flame propagation speed is calculated by detecting the arrival time difference of the propagating flame front. In addition, time-series images of OH chemiluminescence are simultaneously obtained by a high-speed digital CCD camera to ensure the validity of the MICRO system. Furthermore, relationship between the spray properties measured by phase Doppler anemometer (PDA) and the flame propagation speed are discussed with k different experimental conditions by changing the fuel injection rate. It was confirmed that the MICRO probe system was very useful and convenient to obtain the flame propagation speed and that the flame propagation speed was different depending on the spray properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1087-1090
• /
• 2008

Present research is devoted to the development of optical sheet intended to be used inside LCD Backlight unit in order to improve output axial Luminance. It deals with refractive by nature optical sheet having relief embossed top surface (microlenses array). Patterned reflecting layer can be coated on flat bottom surface.