• 한국게임학회 논문지
• /
• 제9권1호
• /
• pp.55-62
• /
• 2009

게임은 이용하는 사람이 선택할 수 있는 자율성의 폭이 넓은 열린 문화(open culture)이다. 즉, 게임 소비자의 참여가 적극적으로 요구되고 수용된다. 그런 의미에서, 원작 게임에 여러 가지 변형을 가하는 모드(MOD)는 게임 이용자의 적극적인 참여를 나타내는 대표적인 사례이자 게임 제작 과정에서 소비자의 참여 가능성을 보여주는 예시이다. 본 연구는 모드 게임의 대표적인 사례 중 Half-Life 모드의 분석을 통해, 게임 제작 과정의 발전적 측면에서 본 소비자 참여 가능성에 대해 논의한다.

• 한국가스학회지
• /
• 제25권5호
• /
• pp.30-36
• /
• 2021

정유 및 석유화학산업의 개질로 튜브에 사용되는 mod HP강에 대한 잔여수명의 예측법을 튜브의 표면 금속조직에 석출된 탄화물의 면적분율에 대한 정량적인 평가를 통해 연구하였다. 표면복제법을 활용한 미세조직 분석을 통하여 탄화물의 면적분율과 잔여수명 사이의 관계를 실험적으로 구하였다. 신재(Virgin)와 950 ℃의 개질로에서 1.8, 6.0, 7.2, 8.5, 9.7 및 16.2년 실제 사용한 튜브들을 광학현미경(OM)을 사용하여 관찰하였으며, 석출물의 면적분율을 Image J 프로그램을 이용한 정량적 이미지 분석에 의해 측정하였다. 석출물의 면적분율이 증가함에 따라 잔여수명이 감소하여 서로 반비례하는 결과를 보여주었다. 이 관계를 사용온도와 수명을 결합한 파라미터인 LMP로 나타내면, 신재에서 LMP 값이 가장 높게 나타났고, 사용시간이 증가할수록 LMP가 감소하여 잔여수명이 줄어 듦을 나타내었다. LMP와 탄화물의 면적분율과의 상관관계를 나타내는 관계식을 도출하였다. 도출한 관계식은 현장에서 잔여수명 평가를 위해 표면복제법 적용으로 면적분율을 측정하여 잔여수명을 평가하는데 사용될 수 있다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제15권1호
• /
• pp.35-38
• /
• 2007

In this study, ORF 46 of Bombyx mod nucleopolyhedrovirus(Bm46) fused with EGFP was expressed in Bombyx mod cell lines, larvae and pupae by BmNPV Bacmid system. Bm46 and EGFP were cloned into donor plasmid pFastBacHTb, which was transformed to competent DH10B cells containing helper and BmNPV bacmid by site-specific transposition. Recombinant bacmid was used to transfected BmN-4 cells to produce the recombinant baculovirus vBm-Bm46-EGFP. Recombination virus was injected into silkworm larvae and pupae. The expression of the fusion protein was monitored by examining green fluorescence using a fluorescent microscope. Intense fluorescence in cells and silkworm was observed at 4 days post-infection, indicating the Bm46-EGFP fusion gene was expressed successfully.

• 생명과학회지
• /
• 제19권11호
• /
• pp.1666-1671
• /
• 2009

배추과에 있어서 SLG (S locus glycoprotein)와 SRK (S locus receptor kinase) 유전자는 자가불화합성의 인식반응에 관여한다. 또한 수화작용에 중요한 aquaporin (MOD) 유전자 역시 자가불화합성 작용에 요구된다. 본 실험은 양배추 자가화 합성(SC) 계통으로부터 SC-SLG, SC-SRK, 및 SC-MOD 유전자들을 동정하고 이들 유전자의 물리적 구조를 분석하였다. 그 결과 이들 유전자들은 기존에 보고된 유전자들과 높은 상동성을 보였고 RT-PCR에 의한 발현 해석에 있어서 정상적인 발현을 나타내었다. 이들 결과들로 부터, 자가화합 양배추 계통은 주두측 자가불화합성 유전자에 이상이 있는 것이 아니라 화분측 자가불화합성 유전자의 이상 그리고/또는 S-locus에 연쇄 되어 있지 않지만 자가불화합성에 관여하는 유전자의 변이에 의해 자가불화합성이 타파되었다고 생각된다.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.168-176
• /
• 2004

Interrupted creep tests were carried out on the Mod.9Cr-1Mo steel in order to investigate the structural degradation during creep. The ranges of creep stress and temperature were from 71 to 167MPa and 873 to 923k, respectively. The change of hardness and tempered martensitic lath width were measured in the grip and gauge parts of interrupted specimens. The lath structure was thermally stable in static conditions, but was not stable during creep, and the structural evolution was enhanced by creep strain. The relation between the change in lath width and strain was described in the from, $\delta$W= a ($W_s-W_o$)$cdot;varepsilon$, where $\varepsilon$ is the strain, $W_o$is the initial lath width, $W_s$ is the final lath width depending solely on stress, and a is the constant of the magnitude of 0.67 $\mu$m /strain. The change in Victors hardness was expressed by a one-valued function of creep life consumption ratio. Based on the empirical relation between strain and lath width, a model was proposed to explain the relation between change in hardness and creep life consumption ratio. The model revealed that about 65$%$ of dislocations in lath structures were eliminated by the migration of subboundaries.

• International Journal of Automotive Technology
• /
• 제6권1호
• /
• pp.45-52
• /
• 2005

Interrupted creep tests for investigating the structural degradation during creep were conducted for a Mod.9Cr-1Mo steel in the range of stress from 71 to 167 MPa and temperature from 873 to 923 K. The change of hardness and tempered martensitic lath width was measured in grip and gauge parts of interrupted creep specimens. The lath structure was thermally stable in static conditions. However, it was not stable during creep, and the structural change was enhanced by creep strain. The relation between the change in lath width and creep strain was described quantitatively. The change in Vickers hardness was expressed by a single valued function of creep LCR(life consumption ratio). Based on the empirical relation between strain and lath width, a model was proposed to describe the relation between change in hardness and creep LCR. The comparison of the model with the empirical relation suggests that about 65% of hardness loss is due to the decrease of dislocation density accompanied by the movement of lath boundaries. The role of precipitates on subboundaries was discussed in connection with the abnormal subgrain growth appearing in low stress regime.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.137-144
• /
• 2010

In general, spinal fusion surgery takes pressure off the pain induced nerves, by restoring the alignment of the spine. Therefore spinal fixation system is used to maintain the alignment of spine. In this study, a biomechanical study was performed comparing the SROM(Spinal Range Of Motion) of three types of system such as Rigid, Dynesys, and Fused system to analyze the behavior of spinal fixation system inserted in vertebra. Dynesys system, a flexible posterior stabilization system that provides an alternative to fusion, is designed to preserve inter-segmental kinematics and alleviate loading at the facet joints. In this study, SROM of inter-vertebra with spinal fixation system installed in the virtual vertebra from L4 to S1 is estimated. To compare with spinal fixation system, a simulation was performed by BRG. LifeMOD 2005.5.0 was used to create the human virtual model of spinal fixation system. Through this, each SROM of flexion, extension, lateral bending, and axial rotation of human virtual model was measured. The result demonstrates that the movement of Dynesys system was similar to normal condition through allowing the movement of lumbar.

• 연구논문집
• /
• 통권31호
• /
• pp.157-163
• /
• 2001

Evolution of microstructure due to service exposure to high temperature has a strong effect performance of heat resistant steels. In case of modified 9Cr-1Mo steels, precipitation of $Fe_2Mo$-type laves phases and coarcening of $M_23C_6$-type carbides is the primary cause of degradation of mechanical properties such as creep resistance, tensile strength and toughness. Creep tests have been carried out on pre-aging mod. 9Cr-1Mo steels to examine the effect of pre-aging and stress on the creep strength. Based on the results, a nondestructive procedure, where electrochemical technique that quantitatively detect laves phases and $M_23C_6$-type carbides in a material is used, has been proposed to evaluate a residual creep life of mod. 9Cr-1Mo steels.

• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.356-368
• /
• 2003

Material properties such as coolant specific heat, film heat transfer coefficient, cladding thermal conductivity, surface diffusion coefficient of the multi-bubble are improved in MACSIS-Mod1. The axial power and flux profile module was also incorporated with irradiation history. The performance and feasibility of the updated driver fuel pin have been analyzed for nominal parameters based on the conceptual design for the KALIMER breakeven core by MACSIS-MOD1 code. The fuel slug centerline temperature takes the maximum at 700mm from the bottom of the slug in spite of the nearly symmetric axial power distribution. The cladding mid-wall and coolant temperatures take the maximum at the top of the pin. Temperature of the fuel slug surface over the entire irradiation life is much lower than the fuel-clad eutectic reaction temperature. The fission gas release of the driver fuel pin at the end of life is predicted to be $68.61\%$ and plenum pressure is too low to cause cladding yielding. The probability that the fuel pin would fail is estimated to be much less than that allowed in the design criteria. The maximum radial deformation of the fuel pin is $1.93\%$, satisfying the preliminary design criterion ($3\%$) for fuel pin deformation. Therefore the conceptual design parameters of the driver fuel pin for the KALIMER breakeven core are expected to satisfy the preliminary criteria on temperature, fluence limit, deformation limit etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.459-464
• /
• 2004

The rifle impact of human body affected by the posture of human for rifling. The interaction human-rifle system influence the firing accuracy. In this paper, impact analysis of human model for shooting posture is carried out. ADAMS code and LifeMOD is used in impact analysis of human model and modeling of the human body, respectively. On the shooting, human model is affected by rifle impact during the 0.001 second. Performed simulation time for shooting is 0.1 second. Applied constraint condition to human-rifle system is rotating and spherical condition. As the results, the displacement of rifle and transfer path analysis of impact of human model is presented.