• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.236-243
• /
• 2012

The leaf growth and physiological characteristics of Forsythia saxatilis were investigated at six natural habitats under different light intensities in Bukhansan in order to figure out an appropriate growth environment for conservation and restoration of F. saxatilis that is Korean endemic plant designated as rare and endangered species. Relative light intensities (RLI) at six habitats showed from 10% to 78% of the full sun. Leaf length, leaf width, leaf area and dry leaf weight of population under highest relative light intensity (78%) were the highest. The ratio of dry leaf weight to leaf area increased with the increase of RLI. The content of photosynthetic pigments such as chlorophyll a, b and carotenoid were the highest at 78% of RLI, whereas the ratio of total chlorophyll to carotenoid content reduced according to the increase of RLI. Photosynthetic parameters, such as photosynthetic rate, also increased with the increase of RLI. The total nonstructural carbohydrate (TNC) was 1.5 times higher at 78% of RLI than that at 10% of RLI and the total soluble sugar (TSS) was the highest at 78% of RLI. In conclusion, leaf characteristics and physiological characteristics have high positive correlation with light intensity. Therefore, light condition should be primarily considered to improve growth and physiology characteristics of F. saxatilis under low light intensity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.262-275
• /
• 2015

The treatment of areas demanding esthetic requirements, such as maxillary anterior teeth, should take into account the achievement of a healthy, harmonious to the surrounding tissue, and an attractive smile line. In this case report, smile line, soft tissue and hard tissue morphology, and the anatomy and proportion of the tooth, must be considered. In patients with unesthetic maxillary anterior ratio due to inadequate gingival contour and diastema caused by peg lateralis, it would be challenging to achieve an esthetic restoration by orthodontic treatment alone. In such case, after orthodontic treatment, dento-gingivo-facial compositional diagnosis and analysis, followed by gingivectomy and prosthodontic restoration is needed to improve the interdental mesial/distal, width/length ratio to achieve a satisfactory esthetic result. In addition, when improving the tooth proportion of peg lateralis by prosthodontic treatment, Porcelain laminate veneer (PLV), which results in less tooth structure loss, reproduction of similar shade to that of the proximal tooth and high transparency, is recommended. This case report demonstrates esthetic improvements by prosthodontic restoration through systematic diagnosis and treatment procedure in patients with unesthetic maxillary anterior proportion after orthodontic treatment due to peg lateralis by means of two female patients aged twenty years old.

• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.99-112
• /
• 2008

The increasing rate of obesity in school aged children has become a conspicuous social phenomenon in Korea. This has been linked to greater economic growth, increasingly westernized dietary habits, and a consumer driven society. Given that obesity can lead to social exclusion or unfavorable attention by other students in a school setting, the design of plus-size garments have become important for effective appearance management skills. This research aimed to establish a somatotype database for obese school boys, aged 10 to 12, in order to develop a sizing system for plus-size upper garments. In order to measure somatotype of average and obese school boys, five categories were recorded; height, obesity, length of trunk, thickness of neck and chest. For obese boys, subcutaneous fat thickness and position of B.P/shoulder point factors were recorded. Obesity factor was subdivided into overall and specific ones, and while the deviation of obese body types was severe compared to the average type. Obese body type showed significantly higher measurements in width, girth, thickness. This is linked to the fact that the frequency ratio of obesity increases with age. Stature and chest were chosen as control dimensions for boys' wear. As crosstabulation of stature(5cm interval) and chest girth(2, 3 and 4cm), and stature(5cm interval)/chest girth(3cm interval) sizing system showed, the most effective cover ratio and adaptability to the data distribution $25{\sim}75$ quartile. Based on the findings, 10 sizes were formulated for average body type, while 18 sizes were formulated for obese type, whose size cover ratios were 48% and 62.9%, respectively. The primary ranges of stature were $145cm{\sim}150cm$, while those of chest girth were $79{\sim}82cm$. Each size was declared as "chest-somatotype{A(average)/O(obesity)-stature". This study proposed a plus-size upper garment sizing systems for obese boys, accompanied with reference measurements for suit, casual wear and underwear. The finding showed that the two systems were totally separate and not overlapping, meaning that plus-size sizing system is essential for obese school boys. The obesity type system had more size and wider range specs.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.208-214
• /
• 2017

This study aimed to determinate the effect of fluorescent light and light-emitting diodes on the leaf morphology, growth and antioxidant capacity of Salvia plebeia. The plants were grown for 56 days after transplanting (DAT) under the fluorescent light (FL) and LEDs (White, Red and Blue (R+B, ratio 2:1), Blue, Red LED) under the same light intensity and photoperiod ($130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 12 hours). Leaf length, width and number of Salvia plebeia at the 56 DAT were significantly higher under the FL and red LED, and lower in the RB LED and white LED. The highest fresh and dry weights of shoot and leaf area were observed in the red LED, followed by the FL and blue LED, and the lowest in the RB LED and white LED. After 21 DAT, leaf apinasty symptom was appeared in plants grown under red LED and RB LED. The chlorophyll content was lower in the red LED. The specific leaf weight, the ratio of leaf dry weight to area, was higher in the blue LED, and lowest in the FL. No significant difference in DPPH radical scavenging activity of Salvia plebeia under the different light sources. All the integrated results suggest that the FL light is a proper light conditions for a closed cultivation of Salvia plebeia.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.209-214
• /
• 2012

Indigo crop, Persicaria tinctoria H. Gross is an annual plant containing natural colorant, the blue dye indigo, and local cultivars had been cultivated to produce natural indigo for textile dyeing in Korea since ancient times. Naju No. 2 is a new mass-selected line from the mother population, Naju Local cultivar. In this study, two breeding lines of Naju Local and Naju No. 2, have been cultivated in four different locations, the South regions of Korea, to compare plant growth and yield characteristics between two lines. Naju No. 2 was higher in plant height, and Naju Local has more 1st branches. Naju No. 2 has larger leaf area and higher width/length ratio of leaf, showing the round leaf type as morphological stable character without regional differences. Though there was considerable regional variation in fresh and dry top weight of harvested plant, the significant difference of plant weight between two lines were not shown. The ratio of leaf to total shoot of dry weight of Naju No. 2 was higher than one of Naju Local, indicating that Naju No. 2 has better yielding of colorant which is synthesized mostly in leaf. Naju No. 2 contained more Niram (crude indigo extract) and indigo, and showed much blueness at dyeing of silk using fresh leaves than Naju Local. We concluded that a new line, Naju No. 2 could be a superior cultivar due to having higher leaf yield and better quality of natural colorant than Naju local cultivar.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.58-66
• /
• 1990

A series of test was performed measuring the failure strength and failure mode of Gr/Pi, $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate containing a single pin loaded hole. The finite element method is applied to calculate the stress distribution in the laminates, then the failure load and the failure mode were predicted by means of the characteristic length. 12 different geometric variations were developed to analyze the effects of the ratio of specimen width to hole diameter (W/d) and ratio of edge distance to hole diameter (L/d). X-Ray of NDE methods were utilized in finding out the initial defects, damage and the fracture mechanism, and SEM(Scanning Electron Microscopes) was used the evaluation of the fracture mechanism and crack propagation around hole under tension pin loading. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate are found to be most sensitive to W/d but not so influenced by L/d. The failure mode and tensile strength predicted by the model show agreement with experiment data for pin loading bolted jointed test except range of $L/d{\leqq}3$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.939-947
• /
• 2010

The LDPC(Low-Density Parity-Check) code, which is one of the channel encoding methods in IEEE 802.11n wireless LAN standard, has superior error-correcting capabilities. Since the hardware complexity of LDPC decoder is high, it is very important to take into account the trade-offs between hardware complexity and decoding performance. In this paper, the effects of LLR(Log-Likelihood Ratio) approximation on the performance of MSA(Min-Sum Algorithm)-based LDPC decoder are analyzed, and some optimal design conditions are derived. The parity check matrix with block length of 1,944 bits and code rate of 1/2 in IEEE 802.11n WLAN standard is used. In the case of $BER=10^{-3}$, the $E_b/N_o$ difference between LLR bit-widths (6,4) and (7,5) is 0.62 dB, and $E_b/N_o$ difference for iteration cycles 6 and 7 is 0.3 dB. The simulation results show that optimal BER performance can be achieved by LLR bit-width of (7,5) and iteration cycle of 7.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.421-427
• /
• 2009

We successfully fabricated 4.7-inch organic thin film transistors array with $640{\times}480$ pixels on flexible substrate. All the processes were done by photolithography, spin coating and ink-jet printing. The OTFT-Electrophoretic (EP) pixel structure, based on a top gate OTFT, was fabricated. The mobility, ON/OFF ratio, subthreshold swing and threshold voltage of OTFT on flexible substrate are: 0.01 ^2/V-s, 1.3 V/dec, 10E5 and -3.5 V. After laminated the EP media on OTFT array, a panel of 4.7-inch $640{\times}480$ OTFT-EPD was fabricated. All of process temperature in OTFT-EPD is lower than $150^{\circ}C$. The pixel size in our panel is $150{\mu}m{\times}150{\mu}m$, and the aperture ratio is 50 %. The OTFT channel length and width is 20 um and 200um, respectively. We also used OTFT to drive EP media successfully. The operation voltages that are used on the gate bias are -30 V during the row data selection and the gate bias are 0 V during the row data hold time. The data voltages that are used on the source bias are -20 V, 0 V, and 20 V during display media operation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.5-10
• /
• 2022

After ginseng seeds were planted in sand, the first experiment was conducted by germinating seeds with a nutrient concentration of 0 to 2.5. The average germination rate was highest in EC 1.0 with a nutrient concentration of 87%, followed by the comparative group with EC 1.5, 82%, EC 2.0, 78%, EC 2.5, 72%, EC 0.5, 71%, and con, 68%. Ginseng seeds were sown in the sandy soil, grown for 60 days were transferred to the ginseng soil, and the second growth experiment was conducted 30 days later. As a result of the experiment, at the nutrient concentration of EC 1.5, it grew from 11.64cm to 15.54cm, the average total length(cm)increased the most from 3.90cm. At the EC 1.0, nutrient concentration, the average total weight(g)increased the most from 0.42g to 0.75g to 0.33g. At the EC 0.5, nutrient concentration, the average total root width(mm) increased the most from 4.06mm to 5.52mm to 1.46mm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.261-272
• /
• 2008

This study was conducted to provide the fundamental data based on the agronomic characteristics of domestic aroma rice, widely cultivated domestic rice and foreign aroma rice for breeding of functional aromatic rice. Among the 104 varieties, all of domestic aroma rice and widely cultivated rice varieties were headed, 24 of 84 varieties of foreign aroma rice were not headed. The average heading date of domestic aroma rice Japonica types of domestic rice was later as 136 day, and Tongil types of domestic aroma rice were faster as 122 day. The average culm length of Indica types of foreign aroma rice was longer as 130 cm, and Tongil types of were shorter as 74 cm. The average panicle length of domestic aroma rice and traditional rice were about 21 cm, and Indica types of foreign aroma rice were longer as 29.5 cm. The average 1,000 grain weight of Tongil types of domestic aroma rice and was not a difference with the domestic aroma rice and was more 2.5 g than the Indica types of foreign aroma rice. The average ratio of grain width and length of Indica types of foreign aroma rice were highest as 3.29 (W/L), and the domestic traditional rice was lowest as 1.7 (W/L). The average fertility rate of the domestic aroma rice, the widely cultivated domestic rice, and the Japonica types of foreign aroma rice were above 89.7%, but the Indica types of foreign and the Tongil types of domestic aroma rice were below 65.4%. The average germination rate of foreign aroma rice were above 83.7%, and domestic aroma rice were above 90.4%. The non-glutinous rice were 64 varieties (84.2%) of total 104 accessions of material rice and the waxy rice were 7 varieties (1%). In the domestic aroma rice, Hyangmi2ho and Aranghyangchalbyeo has a mild aroma grade. In the foreign aroma rice, 22 of 40 varieties of Indica types and 9 of 16 varieties of Japonica types has a lightly aroma grade. And 13 varieties of widely cultivated domestic rice has a non-aroma grade.