• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.1
• /
• pp.117-123
• /
• 2001

In present study a methodology has been developed and applied for the optimum design and performance evaluation of microchannel heat sinks. The optimum design parameters include channel number and fin thickness. For a trial model of 127mm in length, 52.5mm in width, 16mm in height and 2.5mm in base thickness, the optimum channel number and the fin thinckness have been determined to be of 194 and 0.08359mm, respectively in laminar flow region. Performance of the optimally designed microchannel heat sinks has been compared with those having 50% and 150% of the number of channels. The results showed that the 50% and 150% designs increased the pumping power by 200% and 150%, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.72-77
• /
• 2008

In this study, we propose and develop PDMS-based modular actuators. The microactuator which looks like a small insect uses thermal expansion power of the PDMS (polydimethylsiloxane; $sylgar^{(R)}$ 184 silicone elastomer). The PDMS-based microactuator provides a large displacement due to a high thermal expansion coefficient (approximately 310ppm). The microacruator with 1mm length $350{\mu}m$ width is optimized by using a numerical analysis. The shape of the PDMS actuatoris variously designed. They are placed at several positions to find the optimal position that provides a high transformation ratio. The PDMS-based microactuators are fabricated using a conventional micromaching technique. The fabricated microactuator is heated using a hot-plate. The actuator displacement is measured as a function of temperature from $27^{\circ}C$ to $300^{\circ}C$. The experimental results are compared to the simulation result. When heating temperature up to $300^{\circ}C$ is applied to the PDMS actuator, each V-groove-shaped joint is actuated $30{\mu}$ mat $300^{\circ}C$. Anotherdesign of the microactuator has a maximum displacement of about 656mm.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.398-404
• /
• 2003

Most previous researches for the hybrid composite materials such as FRMLs(Al/AFRP, Al/GFRP) have evaluated the fatigue delamination behavior using the traditional fracture mechanism. However, most previous researches have not generally been firmed yet. Because delamination growth behavior in hybrid composite should be consider delamination growth rate, $dA_D$/da using the delamination shape factors, fs instead of traditional fracture mechanic parameters. The major purpose of this study was to evaluate the relationship between delamination shape factor, fs and delamination growth rate, $dA_D$ . And a propose parameter on the delamination aspect ratio, b/a. The details of the study are as follow : 1) Relationship between crack length, a and delamination width,b. 2) Relationship between delamination aspect ration, b/a and delamination area rate,($(A_D)_{N}(A_D)_{ALL}$. 3) Variation of delamination growth rate, $dA_D/da$ was attendant on delamination shape factors, $fs_1$, $fs_2$, $fs_3$. The test results indicated the delamination growth rate depends on delamination shape factors.

• Journal of Plant Biology
• /
• v.34 no.1
• /
• pp.9-18
• /
• 1991

This study deals with the effect of dwarf growth on xylem structure, especially on the dimension of xylem elements described for 12 species of naturally occuring dwarf trees. The length and tangential diameter of tracheary elements and fibers in dwarf trees appear to be shorter and narrower than those in normal trees. Radial width and cell number of the same annual rings are narrower and smaller in dwarf trees than those in normal trees. Height of rays in dwarf trees is lower than that in normal trees. Dwarf conifers appear to have higher ratio, of latewood to earlywood than that in normal trees. In the hardwood species studied, mesomorphy of vessel elements is lower in dwarfs than that in normal trees. It can be concluded that this dwarf growth occurs as a result of extremely slow growth by environmental stress such as water deficiency.ciency.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.4
• /
• pp.503-512
• /
• 2012

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan New Port including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. In addition, Yongwon channel is approximately 100 m wide on average and 3,600 m long, and has the highest slenderness ratio (length/width = 36). So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. In this study, the bottom sediment were collected from the 48 points of the Yongwon channel and the long-term leaching characteristics were analyzed. Thus, changes in sediment and water quality were analyzed through the sediment release test to investigate the degree of contamination. The sediment release from the inside region was higher than the outer region, which is due to the pollutant that comes form the downtown area. The results of this study can be used to predict the water quality in the future and prepare the economically optimized countermeasures to improve the water quality of Yongwon channel, Busan New Port.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.663-672
• /
• 2018

This paper contains a consistent couple-stress theory to capture size effects in Euler-Bernoulli nano-beams made of three-directional functionally graded materials (TDFGMs). These models can degenerate into the classical models if the material length scale parameter is taken to be zero. In this theory, the couple-stress tensor is skew-symmetric and energy conjugate to the skew-symmetric part of the rotation gradients as the curvature tensor. The material properties except Poisson's ratio are assumed to be graded in all three axial, thickness and width directions, which it can vary according to an arbitrary function. The governing equations are obtained using the concept of minimum potential energy. Generalized differential quadrature method (GDQM) is used to solve the governing equations for various boundary conditions to obtain the natural frequencies of TDFG nano-beam. At the end, some numerical results are performed to investigate some effective parameter on buckling load. In this theory the couple-stress tensor is skew-symmetric and energy conjugate to the skew-symmetric part of the rotation gradients as the curvature tensor.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.756-762
• /
• 2001

As a component for a recirculating aquaculture system, a new strain of denitrifying bacterium was isolated from municipal sewage. The isolate was motile by means of one polar flagellum, catalase-positive, and a Gram-negative rod-shaped cell measuring $0.5-0.6{\mu}m$ in width and $1.3-1.9{\mu}m$ in length. The isolate was identified as Pseudomonas fluorescens and produced dinitrogen gas via the reduction of nitrate. The optimal growth conditions (pH, temperature, carbon source, and C/N ratio) of the isolate were found to be 6.8, $30^{\circ}C$, malate, and 3, respectively. Under optimal growth conditions of P. fluorescens, dinitrogen gas was first detected in the exponential growth phase, then a small amount of nitrite was developed and converted to dinitrogen gas in the stationary phase. Pseudomonas fluorescens cells were immobilized in modified polyvinyl alcohol (PVA) gel beads, and the maximum denitrification rate was measured as $36.6 {\mu}lN_2h^-1$ per bead with an optimum cell loading of $20mg {\mu}l^-1$ and $2\%$ sodium alginate added to the PVA gel. The operating stability of the modified PVA gel beads remained unchanged for up to 43 repeated batches.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.55-57
• /
• 2002

In industry, A pallet truck is drived mainly by d.c motor, because it use to battery for input power. However, d.c motor has a brush, this is the disadvantage of the d.c motor for a pallet truck. Though a brushless d.c motor has a permanent magnet, it is for low torque. Switched reluctance motors(SRM) have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both start and rotor, and a high reliability, this paper design the shape of the switched reluctance motor that will replace a d.c motor for A pallet truck. First of all, designed parameter of SRM, outer diameter, diameter of rotor and stock length, from the outputr equation considering electric loading and magnetic loading. Next, design diameter of stator and rotor, depth of slot pole width, air gap as inner size of motor. The design of SRM certify the torque, the efficiency and the output power by a simulation.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.218-226
• /
• 2017

Severe radial thrust under off-design operating conditions can be a harmful factor for centrifugal pumps. In the present work, effects of geometry of a double volute casing on the hydrodynamic performance of a centrifugal pump have been investigated focusing on off-design conditions. Three-dimensional steady Reynolds-averaged Navier-Stokes analysis was carried out by using shear stress transport turbulence model. Numerical results for the hydrodynamic performance of the centrifugal pump were validated compared with experimental data. The hydraulic efficiency and radial thrust coefficient were used as performance parameters to evaluate the hydrodynamic characteristics of the centrifugal pump. The cross-sectional area ratio of the volute casing, the expansion coefficient of the rib structure, the distance between the rib starting point and volute entrance, and radius and width of the volute entrance, and length of the rib structure, were selected as geometric parameters. Results of the parametric study show that the performance parameters are significantly affected by the geometric variables and operating conditions. Optimal configurations of the double volute casing based on the design of experiments technique show outstanding performance in terms of the efficiency and radial thrust coefficient.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1998

We have simulated the operating characteristics of the magnetotransistor(MAGFET) by the finite element method and suggested the optimum design conditions to get a maximum sensitivity, The magnetotransistor has been fabricated by CMOS standard processing according to the suggested design conditions and investigated its electromagnetic characteristics. The sensitivity of the magnetotransistor depends on the ratio of width(W) to length(L) of active area rather than its size, and has a maximum when W/L = 1. The relative sensitivity of a fabricated magnetotransistor was 2.53 %/T.