• The Korean Journal of Zoology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1965

The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.19-24
• /
• 1984

This study was carried out to find out the variations in Burley 21 variety of Surely tobacco. Jeonjul and nine other selected lines of Burley 21 were evaluated. Plant height and several other characteristics were significantly different among tested lines. Especially, Jangsu-1, the earliest flowered line, flowered 5 to 7 days earlier than other lines and had the smallest length width ratio of the largest leaf. Narrow-leaved type, whose length/width ratio of the largest leaf was above 2, 16, was significantly different in number of leaves and weight per unit leaf area from broad-leaved type whose length/width ratio of the largest leaf being below 1.97. Among tested lines, Jeonju (2) - 2 was the best in major agronomic characteristics, yield and physical properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.55-62
• /
• 2004

Although the previous researches evaluated the fatigue behavior of glass fiber/epoxy laminates using the traditional fracture mechanism, their researches were not sufficient to do it: the damage zone of glass fiber/epoxy laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of glass fiber/epoxy laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length and delamination width in hybrid composite material such as Al/GFRP laminate. The details of investigation were as follows : 1) Relationship between crack length and delamination width, 2) Relationship between delamination aspect ratio and delamination area rate, 3) Variation of delamination growth rate is attendant on delamination shape factors. The test results indicated that the delamination growth rate depends on delamination width delamination aspect ratio and delamination shape factors.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2017

PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.123-128
• /
• 2007

Demand for high quality rice has always been a major factor in the international rice marketing. In the present study, doubled haploid (DH) population derived from anther culture of a Tongil/japonica hybrid was used for genetic analysis of rice grain quality. The average values of DH lines for grain weight, grain length and the ratio of grain length to width were near the mid-parent value. More than 40% DH lines showed transgressive segregation for grain weight, length, amylose and lipid content, but less than 10% DH lines observed on ratio of length to width and grain thickness were transgressive segregation. Correlation analysis between appearance qualities and physicochemical characters indicated that grain width and grain thickness both significantly and negatively correlated to protein and lipid content. A highly significant negative correlation between protein content and amylose content was observed.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.143-152
• /
• 2008

This study was conducted to obtain basic information on mainstem, branch and leaf characteristics related to canopy for development of high yielding cultivar using 70 Korean soybean cultivars developed from 1913 to 2000. Variations of canopy width, branch length, and canopy width/length ratio were higher compared to other characteristics among 12 mainstem and branch characters. Variations of petiole angle, leaflet width/length ratio and compound leaf dry weight were higher than other characteristics among eight leaf characters related to plant canopy. Three classifications of soybean cultivars were used based on usage: I)soy sauce and tofu, II)bean sprout, and III)cooking with rice. Canopy width/length ratio was higher in group III, cooking with rice than group I, soy sauce and tofu, and group II, bean sprout, and there was no difference between the two, group I and group II. The total branch length/main stem height ratio was higher in group II, bean sprout and group III, cooking with rice than group I, soy sauce and tofu. Mainstem and branch characteristics related to plant canopy were classified into four groups by ratio of canopy width/length and total branch length/main stem length, respectively. Soybean cultivars with narrow canopy and high dependence of mainstem were Danweonkong, Keumkangkong, Shelby, and Shinpaldalkong. Soybean cultivars with broad canopy and high dependence of mainstem were Kanglim, Keumkangdaelip, and Jinyulkong, and a cultivar with broad canopy and high dependence of branch were Geomjeongkong 2. Leaflet length/width ratio was lowest in cooking with rice and there was no difference between soy sauce and tofu and bean sprout. Compound leaf area was largest in cooking with rice and smallest in bean sprout. Leaf petiole length was short in bean sprout and there was no difference between soy sauce and tofu and bean sprout. Leaf petiole angle was highest in cooking with rice and lowest in bean sprout. Leaf type was classified into four groups based on leaflet width/length ratio and compound leaf area, respectivly. Buseok and Taekwangkong had an oval leaflet and largest area of compound leaf. Eunhakong and Sohokong had extreme narrow leaflet and smallest area of compound leaf. Leaf petiole type was classified into three and four groups based on leaf petiole length and angle, respectively. A soybean cultivar with the shortest petiole length and smallest petiole angle was Eunhakong and cultivars with short petiole length and large petiole angle were Alchankong, Muhankong, and Pureunkong. A soybean cultivar with long petiole length and small petiole angle was Sinpaldalkong 2. Among a total of 70 Korean soybean cultivars, Eunhakong had an extreme narrow type in leaf, smallest compound leaf area, shortest petiole length, and smallest petiole angle of compound leaf.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.2
• /
• pp.75-83
• /
• 2015

The purpose of this study is to improve the previous damage evaluation model for RC members which is proposed by Igarashi[1] in 2010.The previous model was not confirmed by enough data of damage such as, residual crack length, width and area for exfoliation of concrete, etc. In addition, validation of the model is still insufficient. Therefore, experiment of a real-scale RC structure and experiment of RC columns using the high-strength concrete were conducted to gather the data of damage in RC members. The investigation has been conducted gathering the data not only additional experiments data but also existing data for modification of damage evaluation model. It has been investigated on changing damage in RC due to axial force ratio, shear reinforcement and shear span ratio. As a result, several problems were founded in the previous model, such as, hinge length($l_p$), spacing of flexural crack($S_{av,f}$), total width of flexural cracks regulated by maximum width of flexural crack($n_f$) and total width of shear cracks regulated by maximum width of shear crack($n_s$). New model is proposed and evaluated the damage properly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.86-94
• /
• 1999

A set of rice recombinant inbred lines was developed from a cross between a Tongil type variety, Nonganbyeo, and an indica variety, BG276, by the single seed descent method. The number of the lines in the population was 272. All the agronomic characters studied except ADV (alkali-digestion value) showed continuous variation among the RILs, implying that their inheritance mode should be quantitative. The patterns of the variation in the RILs were either normal or skewed distribution. ADVs of RILs were segregated into two groups with 1:1 ratio, indicating that ADVs in this KIL population might be controlled by one major gene. Transgressive variations were also observed in all characters. Heritability values of the characters varied from 0.488 in brown/rough rice ratio to 0.895 in alkali-digestion value. In the analysis of genotypic and phenotypic correlations, the character of yield was positively correlated with 8 different agronomic characters. The number of panicles per hill was negatively correlated with culm length, panicle length, and number of spikelets per panicle. Grain length was positively correlated with grain width, grain thickness, grain length/width ratio, white belly, ADV, and amylose. However, grain length/width ratio was negatively correlated with grain width. White core was also negatively correlated with white belly and ADV.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2012

PURPOSE. We aimed to identify a more esthetic width-to-length ratio by analyzing maxillary central incisor of Korean adult population. Information regarding tooth ratio in the Korean population may be useful to clinicians when restoring anterior teeth. MATERIALS AND METHODS. A total of 40 men and 40 women were included in this study. The NON-MEDIA group included 40 non-celebrities, who were healthy and 25 to 39 years old, with normal dentofacial appearance. The MEDIA group consisted of 40 celebrities selected only on the basis of their soft-tissue facial appearance. The facial photographs of 40 celebrities were collected from the Internet websites. The width and length of the maxillary central incisor were measured using Adobe $Photoshop^{(R)}$ 7.0, a software for analysis, measurement and edition of photographs. Data were analyzed statistically using the Independent t-test at 5% statistical significance level. RESULTS. The mean ratio for the MEDIA group was 0.77, whereas that of the NON-MEDIA group was 0.88. The difference between the two groups was statistically significant. No significant gender differences were found in the width-to-length ratio in MEDIA group. In NON-MEDIA group, however, there were significant differences between female and male. CONCLUSION. After analyzing maxillary anterior teeth of Korean adults, our results were in accordance with the general Western standards of esthetics. A dentist restoring the natural look and beauty of teeth will have to consider those standards.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.666-676
• /
• 2000

For the study of morphological variation of Q. variabilis natural population in Korea, 19 populations were selected through the country in considering latitude, longitude, and geographical characters. Thirty trees were randomly selected from each population and 60 mature leaves were sampled from each tree. Four characters (leaf blade length, maximum blade width, petiole length, and vein number) were measured, and their ratios (the ratio of blade length to maximum blade width, the ratio of blade length to petiole length, the ratio of petiole length to vein number, upper 1/3 blade width to maximum blade width, and upper 1/3 blade width to lower 1/3 blade width) were calculated. 1. Analysis of variance for all leaf characters were significantly different among populations and among individuals within population. Contributions of variance among individuals within population in all the characters were higher than those among populations. Therefore, selection of plus trees may be preferable to desirable populations for breeding program of Q. variabilis. 2. Among principal component analysis for leaf characters, primary 2 principal components appeared to be major variables for leaf form of Q. variabilis because of the loading contribution of 80.5%. The first contribution component was petiole length/vein number and petiole length ; the second one was upper 1/3 blade width/maximum blade width, upper blade width/lower 1/3 blade width and vein number, respectively. 3. Latitude was positively correlated with blade length/maximum blade width and blade length/petiole length, but negatively correlated with petiole length/vein number, upper 1/3 blade width/maximum blade width, upper 1/3 blade width/lower 1/3 blade width, petiole length, and vein number. But, for longitude and altitude the former two traits and the later five traits exhibited the negative and positive correlation, respectively. 4. Cluster analysis using complete linkage method for leaf characters showed two groups to Euclidean distance 1.6. They were group I of population 1. 4, 5, and 13 and group II of population 2, 3, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16, 17, 18, and 19. However, group II was divided again to Euclidean distance 1.3, that is a group including population 3, 7, 10, 14, 15, and 17(group II-1) and the other group comprising population 2, 6, 8, 9, 11, 12, 16, 18, and 19(group II-2). This cluster could be mainly observed due to difference among population in aspect (group I : NE, group II-1 : SE, and group II-2 : SW).