• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.637-640
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue lift is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type ship's bellows that is applied to design of experiment using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.

• 대한수학회지
• /
• 제58권3호
• /
• pp.571-595
• /
• 2021

In this paper we study the algebraic structure of ℤ_pℤ_p[u]/k>-cyclic codes, where u^k = 0 and p is a prime. A ℤ_pℤ_p[u]/k>-linear code of length (r + s) is an R_k-submodule of ℤ^r_p × R^s_k with respect to a suitable scalar multiplication, where R_k = ℤ_p[u]/k>. Such a code can also be viewed as an R_k-submodule of ℤ_p[x]/r - 1> × R_k[x]/s - 1>. A new Gray map has been defined on ℤ_p[u]/k>. We have considered two cases for studying the algebraic structure of ℤ_pℤ_p[u]/k>-cyclic codes, and determined the generator polynomials and minimal spanning sets of these codes in both the cases. In the first case, we have considered (r, p) = 1 and (s, p) ≠ 1, and in the second case we consider (r, p) = 1 and (s, p) = 1. We have established the MacWilliams identity for complete weight enumerators of ℤ_pℤ_p[u]/k>-linear codes. Examples have been given to construct ℤ_pℤ_p[u]/k>-cyclic codes, through which we get codes over ℤ_p using the Gray map. Some optimal p-ary codes have been obtained in this way. An example has also been given to illustrate the use of MacWilliams identity.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.93-99
• /
• 2005

In this work, computer-aided process design is carried out to develop an optimal preform of a pressure vessel. Knowledge-based rules are employed to design the preform, and they are formulated using the handbooks of plasticity theories. In the FE-analysis, a commercial finite element code, ABAQUS was employed. Axisymmetric deep drawing of a hemisphere-bottomed cup has been analyzed fur various combinations of die design parameters. The length of the land of die, the clearance between punch and die and the clearance between the blank holder and die are optimized to minimize the forming load. The results of the simulations are verified with the experiments which are scaled down to one tenth of the actual size.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.431-442
• /
• 2015

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.14-24
• /
• 2011

In this paper, design optimization for mixed-flow pump impellers and diffusers has been studied using a commercial computational fluid dynamics (CFD) code and DOE (design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser. Geometric design variables were defined by the vane plane development, which indicates the blade-angle distributions and length of the impeller and diffusers. The vane plane development was controlled using the blade-angle in a fixed meridional shape. First, the design optimization of the defined impeller geometric variables was achieved, and then the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Next, design optimizations of the defined diffuser shape variables were performed. The importance of the geometric design variables was analyzed using $2^k$ factorial designs, and the design optimization of the geometric variables was determined using the response surface method (RSM). The objective functions were defined as the total head and the total efficiency at the design flow rate. Based on the comparison of CFD results between the optimized pump and base design models, the reason for the performance improvement was discussed.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.149-157
• /
• 2004

Implicit finite element analysis of the flat surface-straight edge hemming process is performed by using a commercial code ABAQUS/Standard. Methods of finite element modeling for springback simulation and contact pair definition are discussed. An optimal mesh system is chosen through the error analysis that is based on the smoothing of discontinuity in the state variables. This study has focused on the investigation of the influence of process parameters in flanging, pre-hemming and main hemming on final hem quality, which can be defined by turn-down, warp and roll-in. The parameters adopted in this parametric study are flange length, flange angle, flanging die corner radius, face angle and insertion angle of pre-hemming punch, and over-stroke of pre-hemming and main hemming punches.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.427-435
• /
• 2015

This paper presents a high-throughput low-complexity decoder architecture and design technique to implement successive-cancellation (SC) polar decoding. A novel merged processing element with a one's complement scheme, a main frame with optimal internal word length, and optimized feedback part architecture are proposed. Generally, a polar decoder uses a two's complement scheme in merged processing elements, in which a conversion between two's complement and sign-magnitude requires an adder. However, the novel merged processing elements do not require an adder. Moreover, in order to reduce hardware complexity, optimized main frame and feedback part approaches are also presented. A (1024, 512) SC polar decoder was designed and implemented using 40-nm CMOS standard cell technology. Synthesis results show that the proposed SC polar decoder can lead to a 13% reduction in hardware complexity and a higher clock speed compared to conventional decoders.

• 한국항해항만학회지
• /
• 제36권8호
• /
• pp.631-635
• /
• 2012

수중에서의 통신은 해수면과 해저면 등에 의한 신호의 반사가 생겨 다중경로 전달현상이 발생한다. 이러한 다중경로 전달의 영향으로 신호는 왜곡되고 원활한 수신을 방해하게 된다. 본 논문에서는 이러한 다중경로 환경에서 효율적인 패킷 설계를 위하여 채널 부호화 기법으로는 부호화 후의 크기 N = 1944 비트, 전송하고자 하는 데이터의 크기 K = 972 비트를 가지는 부호화율 1/2 인 LDPC(Low Density Parity Check codes) 부호를 이용하였으며, 다중경로로 인한 위상 오차 추정은 decision directed 방식을 이용하여 위상 추정을 하였다. 실제 동해 바다에서 송수신 거리가 200m, 500m 그리고 데이터 속도를 1Kbps, 4Kbps로 설정하여 각 거리 및 데이터 속도에 따른 QEF(Quasi Error Free)가 되는 지점에서의 최적의 패킷 구성을 위한 데이터 길이를 제시하였다.

• 한국전산구조공학회논문집
• /
• 제33권6호
• /
• pp.419-426
• /
• 2020

본 연구에서는 철골편심가새골조 시스템을 대상으로 다목적최적화기법을 통해 설계를 수행하고 그 결과를 분석하였다. 최적화 설계를 위해 유전 알고리즘의 일종인 NSGA-II를 활용하였다. 여기서, 목적함수는 이율배반적 관계를 갖는 구조물량과 층간변위로 하여 최소화되고, 제약조건에는 구조기준에서 요구하는 내력비, 링크의 회전각 등을 포함하였다. 제약조건은 최적화 알고리즘 내에서 각 항목을 위반할수록 목적함수 값을 크게 증가시키는 벌금함수의 형태를 가지고 있다. 설계기준에서 EBF 시스템의 설계규정은 링크 부재만 항복이 허용되며 나머지 부재는 링크 항복 시 발생되는 부재력을 탄성상태에서 견디도록 의도한 역량설계법에 기초한다. 그러나 최적화를 통해 도출된 결과 중 일부는 구조기준의 설계조항은 만족하지만 특정층 링크에 소성변형이 집중되어 연약층을 형성함으로써 기준에서 의도하는 역량설계의 원칙을 위배하는 결과가 나타났다. 이를 해결하기 위해 모든 링크의 전단 초과강도계수 중 최대값이 최소값의 1.25배를 넘지 않도록 하는 제약식을 추가하였다. 새로운 제약식을 추가한 경우 모든 최적해는 설계기준과 역량설계의 원칙을 준수하는 것으로 나타났다. 모든 설계안에서 보 경간에 대한 링크의 길이비는 전단링크의 범주에 해당하는 10% ~ 14%였다. 전체적으로 설계안들은 링크의 초과강도 계수비가 가장 지배적인 제약으로 작용하였으며, 구조기준의 요구사항 중 층간변위와 내력비 등의 항목에서 허용치에 비해 매우 보수적으로 설계되었다.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.451-460
• /
• 2004

W-CDMA 시스템의 파일럿 비트 패턴은 채널 측정 및 프레임 동기 확인에 사용된다. 본 논문은 이러한 파일럿 패턴의 프레임 동기용 이원부호를 제안한다. 프레임 동기 단어라고 불리는 이러한 이원부호의 자기 상관 및 상호 상관 특성을 이용하여 이상적인 프레임 동기 특성을 구할 수 있는 회로를 제안한다. W-CDMA시스템에서는 두 개의 수신 단말기를 갖지 않고도, 다른 주파수의 측정을 가능하게 하기 위한 압축모드(compressed mode)를 두고 있다. 이 모드에서는 10 msec의 한 프레임 시간 동안에 7 슬랏까지 전송이 중단될 수 있는데, 이러한 경우에 제안된 프레임 동기용 이원부호의 우선 쌍 간의 보완 매핑(complementary mapping) 관계를 이용하면, 이상적인 프레임 동기 특성을 유지 할 수 있음을 보인다. 그리고 우선 쌍 개념, 보완 매핑(complementary mapping) 관계, 최대장부호(maximal length sequence) 개념을 이용하여 제안된 프레임 동기 단어를 생성하는 회로에 관하여 논한다.