• Title/Summary/Keyword: length and diameter

Search Result 4,136, Processing Time 0.033 seconds

Seasonal Changes of Growth and Extract Content of Roots in Panax ginseng C. A. Meyer (인삼의 지하부 생육 및 엑스함량의 경시적 변화)

  • Lee, Sung-Woo;Kang, Seung-Won;Seong, Nak-Sul;Hyun, Geun-Su;Hyun, Dong-Yun;Kim, Young-Chang;Cha, Seon-Woo
    • Korean Journal of Medicinal Crop Science
    • /
    • v.12 no.6
    • /
    • pp.483-489
    • /
    • 2004
  • Monthly changes of underground growth and ethanol extract content was investigated from April to September in Korean ginseng of 4, 5 and 6 year-old. Taproot's length was repeatedly reduced and recovered without increasing by growth duration, while it's diameter was gradually increased until September of harvest time. Top weight reached to the peak on July, and decreased gradually until harvest time. Root weight of 4, 5 and 6-year-old ginseng was decreased on May, but increased gradually until harvest time except 6-year-old ginseng decreased after July. Relative growth rate (RGR) of root per plant was low on May and August, but high on June, July, and September in 4, 5 and 6 year-old ginseng. RGR of 4 and 5-year-old ginseng in each lateral and fine root showed distinct changes by month, while those showed little seasonal changes in 6 year-old ginseng. Ratio of root above 60g on september was 23%, 60% and 69%, respectively, among 4, 5 and 6 year-old ginseng. Moisture content of root was gradually decreased until september without significant difference from July to september in 4, 5 and 6 year-old ginseng, and its descending order on september was 4, 5 and 6 year-old ginseng. Hardness of taproot was decreased on May, but increased until september in 4 and 5 year-old ginseng, while that of 6 year-old ginseng was gradually decreased from August to september. Extract content of 4, 5 and 6 year-old ginseng in taproot and lateral root was distinctly decreased from March to June, but gradually increased until September. Although extract content of March and May in 4 year-old ginseng on showed higher than that of 5 and 6 year-old ginseng, it of September didn't show significant difference among 4, 5 and 6 year-old ginseng.

Morphometric Study on the Arterial Palmar Arch of the Hand (손바닥 동맥활에 관한 형태계측 연구)

  • Park, Bong Kwon;Jang, Soo Won;Choi, Seung Suk;Ahn, Hee Chang
    • Archives of Plastic Surgery
    • /
    • v.36 no.6
    • /
    • pp.691-701
    • /
    • 2009
  • Purpose: Deviations of arterial palmar arches in the hand can be explained on the embryological basis. The purpose of this study was to provide new information about palmar arches through cadaver's dissection. The values of the location and diameter in these vessels were analyzed in order to support anatomical research and clinical correlation in the hand. Methods: The present report is based on an analysis of dissections of fifty - three hands carried out in the laboratory of gross anatomy. A reference line was established on the distal wrist crease to serve as the X coordinate and a perpendicular line drawn through the midpoint between middle and ring fingers, which served as the Y coordinate. The coordinates of the x and y values were measured by a digimatic caliper, and statistically analyzed with Student's t - test. Results: Complete superficial palmar archs were seen in 96.2 % of specimens. In the most common type of males, the superficial arch was formed only by the ulnar artery. In the most common type of females, the superficial arch was formed anastomosis between the radial artery and the ulnar artery. The average length of the superficial and deep palmar arch is $110.3{\pm}33.0mm$ and $67.9{\pm}14.0mm$ respectively. Regarding the superficial palmar arch, ulnar artery starts $-16.1{\pm}5.1mm$ on X - line, and $2.5{\pm}24.5mm$ on Y - line. Radial artery appears on palmar side $7.7{\pm}3.2mm$ on X - line, and $20.9{\pm}10.9mm$ on Y - line. But radial artery starts on $6.3{\pm}3.6mm$ on X - line, and $3.4{\pm}5.1mm$ on Y - line. Digital arteries of superficial palmar arch starts on $6.1{\pm}3.7mm$, $33.9{\pm}8.8mm$ on index finger, $1.8{\pm}3.4mm$, $40.1{\pm}7.3mm$ on middle finger, $-3.2{\pm}4.9mm$, $42.6{\pm}7.0mm$ on ring finger, and $-8.9{\pm}5.1mm$, $42.5{\pm}80mm$ on little finger in respective X and Y coordinates. Radial artery of deep palmar arches measured at the palmar side perforating from the dorsum of hand. It's coordinates were $9.7{\pm}4.8mm$ on X - line, $21.7{\pm}10.2mm$ on Y - line. Ulnar artery was measured at hypothenar area, and it's coordinates were $-20.4{\pm}6.3mm$ on X - line, and $30.6{\pm}7.4mm$ on Y - line. Conclusions: Anatomically superficial palmar arch can be divided into a complete and an incomplete type. Each of them can be subdivided into 4 types. The deep palmar arch is less variable than the superficial palmar arch. We believe these values of the study will be used for the vascular surgery of the hand using the endoscope and robot in the future.

Impact of Elevated Temperature and CO2 on Growth and Fruit Quality of Pepper (Capsicum annuum L.) (온도 및 CO2 상승이 고추의 생육 및 과실품질에 미치는 영향)

  • Song, Eun Young;Moon, Kyung Hwan;Son, In Chang;Wi, Seung Hwan;Kim, Chun Hwan;Lim, Chan Kyu;Oh, Soonja
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.18 no.4
    • /
    • pp.179-187
    • /
    • 2016
  • This study was conducted to determine the impact of elevated temperature and $CO_2$ concentration based on climate change scenario on growth and fruit quality of pepper (Capsicum annuum L. cv. Muhanjilju) with SPAR (Soil Plant Atmosphere Research) chamber. The intraday temperatures of climate normal years fixed by $20.8^{\circ}C$ during the growing season (May 1~October 30) of climatic normal years (1971~2000) in Andong region. There were treated with 4 groups such like a control group (ambient temperature and 400ppm $CO_2$), an elevated $CO_2$ group (ambient temperature and 800ppm $CO_2$), an elevated temperature group (ambient temperature+$6^{\circ}C$ and 400ppm $CO_2$) and an elevated temperature/$CO_2$ group (ambient temperature+$6^{\circ}C$ and 800ppm $CO_2$). Compared with the control, plant height, branch number and leaf number increased under the elevated temperature and elevated temperature/$CO_2$ group. However, leaf area and chlorophyll content showed a tendency of decreasing in the elevated temperature group and elevated temperature/$CO_2$ group. The number of flower and bud were decreased in the elevated temperature and elevated temperature/$CO_2$ group (mean temperature at $26.8^{\circ}C$) during the growth period. The total number and the weight of fruits were decreased in the elevated temperature group and elevated temperature/$CO_2$ group more than the control group. While the weight, length and diameter of fruit decreased more than those of control as the temperature and $CO_2$ concentration increased gradually. This result suggests that the fruit yield could be decreased under the elevated temperature/$CO_2$ ($6^{\circ}C$ higher than atmospheric temperature/2-fold higher than atmospheric $CO_2$ concentration), whereas the percentage of ripen fruits after 100 days of planting was increased, and showed earlier harvest time than the control.

Breeding of Oriental Lily 'Pacific Wave' with Upward-facing and White Petals (상향 개화형 백색 오리엔탈나리 'Pacific Wave' 육성)

  • Rhee, Hye Kyung;Cho, Hae Ryong;Lim, Jin Hee;Kim, Mi Seon;Park, Sang Kun;Shin, Hak Ki;Joung, Hyang Young;Yae, Byeong Woo
    • FLOWER RESEARCH JOURNAL
    • /
    • v.16 no.4
    • /
    • pp.299-303
    • /
    • 2008
  • An Oriental lily cultivar 'Pacific Wave' was released in 2007 at National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA), Suwon, Korea. The crossing was made in 1999 between Oriental lily 'Simplon', an outward-facing and white colored cultivar, and 'Spinoza', pink colored cultivar. The first selection was done in 2003 with a line of 'O-03-16'. Multiplication and bulb growth, and performance test was conducted from 2004 to 2006. This selection was later on given as 'Pacific Wave' in 2007 at NHRI. Flowering time of 'Pacific Wave' in plastics house culture is mid June and grows average 115 cm. Flowers are upward-facing with 20.1 cm in diameter and white with yellow centered (RHS W155C + Y9A). Mean petal length and width is 12.2 cm and 4.2 cm, respectively. Leaves are 12.3 cm long, 2.9 cm wide. The throat color is green. It shows gray and purple stigma, and red brown pollen. The weight and size of bulb is 82.5 g and 19.6 cm, respectively. Year-round flowering can be by storing the bulb under -1 to $-2^{\circ}C$ conditions. It is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease in summer wet season.

A Study on the Characteristics and Model of Lotus Pond in Joseon Royal Tombs (조선왕릉 연지(蓮池)의 특성과 전형)

  • Ko, Seung-Kwan;Koo, Bon-Hak;Choi, Jong-Hee
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.29 no.3
    • /
    • pp.116-123
    • /
    • 2011
  • This study investigates the characteristics(form, material, structure, method of construction, vegetation) and model of lotus pond in Joseon Royal Tombs for conservation and restoration. The objects of study are the lotus pond of Namyangju Gwangreung, Hyoreung, Gimpo Jangreung and Sungreung that are well-preserved and the record is remaining. The form is two plane types, square shaped include an island and square shaped. The pond is 7.5~81m in width and 6.5~45m in length and the island is 8~16m in diameter. The depth of water is 0.5~1.2m and the cross section form is narrow bottom and wide top. The material of shore protection is soil in Hyoreung, Gimpo Jangreung and Sungreung. The bottom is mud in all sites. I think that the main material of the lotus pond in Joseon Royal Tombs is soil. The lotus pond is built by soil bank in the structure and method of construction. The water supply and drainage are worked through the culvert. There are many kinds of plants in the lotus pond today, however I think that the model of vegetation of lotus pond in Joseon Royal Tombs is lotus the inside, pine tree, fir tree and flowers the around and pine tree the inside of island in compared the present and the old literature. In comparison with the lotus pond in Joseon Royal Tombs and the lotus pond in the Joseon palace, the material is the biggest difference. The main material is soil in Royal Tombs but isodomic in Royal Palace. I think that the difference of material in between two causes the difference of structure and method of construction. The Royal Tombs is valuable in architecture, landscape and esthetics, this study investigated the characteristics and model of lotus pond in Joseon Royal Tombs. I think that this study serves as a momentum to find a traditional technique in Royal water space and offer the foundation to plan in the contemporary water space.

Investigation of the Rice Plant Transfer and the Leaching Characteristics of Copper and Lead for the Stabilization Process with a Pilot Scale Test (논토양 안정화 현장 실증 시험을 통한 납, 구리의 용출 저감 및 벼로의 식물전이 특성 규명)

  • Lee, Ha-Jung;Lee, Min-Hee
    • Economic and Environmental Geology
    • /
    • v.45 no.3
    • /
    • pp.255-264
    • /
    • 2012
  • The stabilization using limestone ($CaCO_3$) and steel making slag as the immobilization amendments for Cu and Pb contaminated farmland soils was investigated by batch tests, continuous column experiments and the pilot scale feasibility study with 4 testing grounds at the contaminated site. From the results of batch experiment, the amendment with the mixture of 3% of limestone and 2% of steel making slag reduced more than 85% of Cu and Pb compared with the soil without amendment. The acryl column (1 m in length and 15 cm in diameter) equipped with valves, tubes and a sprinkler was used for the continuous column experiments. Without the amendment, the Pb concentration of the leachate from the column maintained higher than 0.1 mg/L (groundwater tolerance limit). However, the amendment with 3% limestone and 2% steel making slag reduced more than 60% of Pb leaching concentration within 1 year and the Pb concentration of leachate maintained below 0.04 mg/L. For the testing ground without the amendment, the Pb and Cu concentrations of soil water after 60 days incubation were 0.38 mg/L and 0.69 mg/l, respectively, suggesting that the continuous leaching of Cu and Pb may occur from the site. For the testing ground amended with mixture of 3% of limestone + 2% of steel making slag, no water soluble Pb and Cu were detected after 20 days incubation. For all testing grounds, the ratio of Pb and Cu transfer to plant showed as following: root > leaves(including stem) > rice grain. The amendment with limestone and steel making slag reduced more than 75% Pb and Cu transfer to plant comparing with no amendment. The results of this study showed that the amendment with mixture of limestone and steel making slag decreases not only the leaching of heavy metals but also the plant transfer from the soil.

Studies on the Possible Utilization of Diplachne fusca L. as a Forage Crop II. Growth Characteristics, Forage Yield and Quality of Diplachne fusca L. (바다새 (Diplachne fusca L.) 의 사료작물화 가능성에 관한 연구 II. 바다새의 생육특성, 사초수량 및 사료가치)

  • 김창호;양주훈;이효원
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.18 no.3
    • /
    • pp.179-186
    • /
    • 1998
  • This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea The secondary experiment was conducted to know on growth characteristics, forage yield and forage value of Diplachne fusca L. in order to get a necessary data on possible utilization of native plant as a forage crop and practical use of reclaimed saline land. The results obtained are summarized as follows; 1. The growth of Diplachne fusca L. was neary finished at heading stage. So plant height, leaf length, leaf width, stem diameter, tillering number, fresh weight and dry weight per plant were 137.5cm, 42.6cm, 4.65mm, 2.48mm, 15.3 tiller, 44.68 and 15.3g respectively. 2. Fresh weight was the highest with 4,460kg/10a at heading stage, dry weight was 1,530kg/10a at heading stage and 1,630kg/10a at 20 day after heading. The fresh weight was significantly difference between cutting height level according to cutting time, but total fresh weight was not significantly difference between cutting height level. Total dry weight was significantly difference between cutting height, so it was a large yield at cutting height of 10cm. 3. The contents of crude protein, available protein, digestible protein and TDN were the range of 12.3~3.7%, 12.3~3.7% 10.8~3.6% and 65.2~60.7% according to growth stage, respectively. The highest yield of crude protein, available protein, and digestible protein were showed at heading stage, that of TDN showed at 20 day after heading. The contents of ADF and NDF were the range of 36.4~50.0% and 62.7-80.5% according to growth stage. 4. The contents of P, Ca, K and Mg were the range of 0.31~0.20, 0.70~0.52, 1.74~1.28 and 0.19~0.18% according to growth stage, respectively. The highest yield of P, Ca and K was showed at heading stage, that of Mg showed at 20 day after heading. 5. The contents of ENE, NEL, NEM and NEG were the range of 1.42~1.29, 0.68~0.62, 0.68~0.61 and 0.40~0.35 McaVlb according to growth stage, respectively. The highest yield of ENE, NEL, NEM and NEG was showed at 20 day after heading by inuease after heading. 6. The grasseating ratio of Diplachne fusca L. of before and after heading by milk cattle was 96.5% and 95.3%, respectively.

  • PDF

The Egg Development of Korean Slender Gudgeon, Squalidus gracilis majimae (Cypriniforms: Cyprinidae) (한국산 긴몰개 (Squalidus gracilis majime, Cyprinidae)의 난발생)

  • Park, Kyung-Seo;Hong, Young-Pyo;Moon, Woon-Ki;Choi, Shin-Suk;An, Kwang-Guk
    • Korean Journal of Ecology and Environment
    • /
    • v.38 no.1 s.110
    • /
    • pp.73-82
    • /
    • 2005
  • This study was conducted, based on the field survey and laboratory observations, to elucidate egg developmental processes and their characteristics of the Korean slender gudgeon, Squalidus gracilis majimae. For the experiments, the mature adults were collected at the Woongcheon-Cheon Stream and Boreung Reservoir located in Boreung City, Chungnam Province and eggs were obtained from the natural spawning area. Morphological characteristics of the egg and embryonic development were summarized as follows: The shape of the fertilized egg was spherical, adhesive and transparent. The fertilized egg was 2.9${\pm}$0.3 mm (n = 30) in mean diameter under water temperature of $26{\pm}1.5^{\circ}C$, light white in color and had no oil droplets. After 20 minutes from the time of fertilization, a blastodisc was formed and divided into two cells at 48 minutes after fertilization. The blastular stage occurred at 5 hours 40 minutes after fertilization and the gastrular stage was detected at 8 hours 41 minutes after fertilization. The beginning of embryo formation was observed at 12 hours 58 minutes after fertilization and optic vesicles and 9 somites were discovered at 17 hours 05 minutes after fertilization. Differentiation of brains and embryo wiggling were observed at 37 hours 27 minutes after fertilization. Heart beating and the formation of melanophores in optic vesicles were detected at 44 hours 46 minutes after fertilization. The formation of pectoral fins and melanophores in the body were discovered at 50 hours 36 minutes after fertilization. Hatching occurred at 57 hours 49 minutes after fertilization. The newly hatched larvae were 3.3${\pm}$0.2 mm (n = 120) in total length. We believe that these results may contribute the species and population conservations under the situation of accelerated water pollution and the decreases of its diversity.

BONE DENSITY AND HISTOMORPHOMETRY ASSESSMENT OF DENTAL IMPLANT USING COMPUTERIZED TOMOGRAPHY (컴퓨터 영상을 이용한 임플란트 식립부위의 골밀도와 조직학적 연구)

  • Son, Jang-Ho;Choi, Byung-Hwan;Park, Soo-Won;Cho, Yeong-Cheol;Sung, Iel-Yong;Lee, Ji-Ho;Byun, Ki-Jung
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.31 no.2
    • /
    • pp.136-142
    • /
    • 2009
  • Bone density in the recipient implant site seems to be an important factor for long term success of endosseous implants. Preoperative evaluation of bone density is very helpful to assist the clinician with the treatment planning of implant therapy. Accurate information on bone density will help the surgeon identify suitable implant sites, thereby improving the success rate of the procedure. Purpose; The aim of this study was to evaluate a correlation between bone density measured preoperatively with computerized tomography and histologically measured bone density by bone biopsy. Patients and methods; Twenty seven patients were selected. All the patients were in good health, with no systemic disorder and additional bone graft. Preoperatively the patients underwent CT scanning to evaluate Houmsfield Unit(HU). Each patients wore a surgical template for implant placement. During surgery 2mm in diameter and 6mm in length specimens were taken. Histomorphometric analysis was performed using digitalized image analysis software Axiovision 4.3. Also, the Resonance frequency analysis(RFA) and insertion torque values were recorded. Results; The highest histomorphometric values was found in the posterior mandible $32.3{\pm}3.8$, followed by $29.9{\pm}2.6$ for the posterior maxilla, $29.4{\pm}2.6$ for the anterior maxilla, $28.6{\pm}2.3$ for the anterior mandible(p=0.214). The hounsfield unit was $989.2{\pm}258.1$ in the posterior mandible, $845.0{\pm}241.5$ in the anterior maxilla, $744.5{\pm}92.6$ in the anterior mandible, $697.3{\pm}136.9$ in the posterior maxilla(p=0.045). This results may suggest that there are strong correlation between the histomorphometric values and hounsfield unit(r=0.760, p<0.05). The RF measurements were $81.9{\pm}2.4$ ISQ in the posterior mandible, $79.0{\pm}1.4$ ISQ in the anterior mandible, $78.3{\pm}4.6$ ISQ in the posterior maxilla, $76.5{\pm}5.0$ ISQ in the anterior maxilla(p=0.048). The insertion torque values was $43.2{\pm}4.2\;Ncm$ in the posterior mandible, $42.0{\pm}0.0\;Ncm$ in the anterior mandible, $41.3{\pm}4.1\;Ncm$ in the posterior maxilla, $40.8{\pm}3.8\;Ncm$ in the anterior maxilla(p=0.612). This results may suggest that there are statistical significance between the hounsfield unit and the insertion torque values(r=0.494, p<0.05), the histomorphometric values and the insertion torque values(r=0.689, p<0.05). But there was no correlation between histomorphometric values and ISQ. There was no statistical significance in age and gender effect on parameters. Conclusions; There was significant correlations between bone density and implant stability parameters. The bone density measurements using preoperative CT may help clinicians to predict primary stability before implant insertion, which is associated with implant survival rates.

Effect of Zero Drainage Using Drainage Zero Sensor on Root Zone Environment, Growth and Yield in Tomato Rockwool Culture (토마토 수경재배 시 배액제로 센서를 이용한 배액제로화가 근권환경, 생육 및 수량에 미치는 영향)

  • Hwang, Yeon-Hyeon;An, Chul-Geon;Chang, Young-Ho;Yoon, Hae-Suk;An, Jae-Uk;Shon, Gil-Man;Rho, Chi-Woong;Jeong, Byoung-Ryong
    • Journal of Bio-Environment Control
    • /
    • v.21 no.4
    • /
    • pp.398-403
    • /
    • 2012
  • This study was carried out to investigate the effect of irrigation method adopted for reducing nutrient solution drainage on the root zone environment, growth and yield of a tomato crop grown in a rockwool medium. The irrigation control methods used were large quantity irrigation at a long interval controlled by only an integrated solar radiation sensor (standard), medium quantity irrigation at a medium interval (zero drainage 1), and small quantity irrigation at a short interval (zero drainage 2) controlled by both an integrated solar radiation sensor and a zero drainage sensor. The amount of the nutrient solution supplied and the drain percentage per plant of the standard, zero drainage 1, and zero drainage 2 were 1.4, 0.9 and 0.8 L, and 23.8, 8.6 and 3.7%, respectively. The average, minimum, and maximum water contents and EC of the standard, zero drainage 1, and zero drainage 2 were 64.5~88% and $1.5{\sim}3.5dS{\cdot}m^{-2}$, 40.3~76.0% and $2.5{\sim}4.0dS{\cdot}m^{-2}$, and 56.3~69.0% and $2.7{\sim}3.7dS{\cdot}m^{-2}$, respectively. There was no difference in leaf width, number of leaves, and stem diameter among the treatments. However, plant height and leaf length decreased in the zero drainage 1 and 2 treatments as compared to the standard. The fruit marketable yield per 10a in the zero drainage 1 and 2 treatments was about 93 and 88%, respectively, of that in the standard treatment.