• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1510-1514
• /
• 2011

In this paper, linear discrete model of the electro-hydraulic servo system are made for parameters estimation. The parameters of electro-hydraulic servo system are estimated using the recursive least square method. Persistent excitation conditions are studied in order to estimate parameters of electro-hydraulic servo system to real values and parameters estimation affections are studied due to the forgetting factors variation. As the results, An parameter estimation method has been synthesized for minimizing the error between reference and error.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.87-93
• /
• 2005

A new method for real-time estimating left ventricular relaxation time constant (T) from the left ventricular (LV) pressure waveform, based on the isovolumic relaxation model, is proposed. The presented method uses a recursive least squares (RLS) algorithm to accomplish real-time estimation. A new criterion to detect the end-point of the isovolumic relaxation period (IRP) for the estimation of T is also introduced, which is based on the pattern analysis of mean square errors between the original and reconstructed pressure waveforms. We have verified the performance of the new method in over 4,600 beats obtained from 70 patients. The results demonstrate that the proposed method provides more stable and reliable estimation of τ than the conventional 'off-line' methods.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2018

In massive multiple-input multiple-output (MIMO) systems, linear channel estimation algorithms are widely applied owing to their simple structures. However, they may cause pilot contamination, which affects the subsequent data detection performance. Therefore, herein, for an uplink multicell massive multiuser MIMO system, we consider using an alternating projection (AP) for channel estimation to eliminate the effect of pilot contamination and improve the performance of data detection in terms of the bit error rates as well. Even though the AP is nonlinear, it iteratively searches the best solution in only one dimension, and the computational complexity is thus modest. We have analyzed the mean square error with respect to the signal-to-interference ratios for both the cooperative and non-cooperative multicell scenarios. From the simulation results, we observed that the channel estimation results via the AP benefit the following signal detection more than that via the least squares for both the cooperative and non-cooperative multicell scenarios.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.257-266
• /
• 2003

Distribution-free estimation methods are proposed for slope, $\beta$ in the simple linear regression model. In this paper, we suggest the point estimators using the sequential slope based on sign test and Wilcoxon signed rank test. Also confidence intervals are presented for each estimation methods. Monte Carlo simulation study is carried out to compare the efficiency of these methods with least square method and Theil´s method. Some properties for the proposed methods are discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1061-1066
• /
• 2014

Transmission characteristics of the sound propagation is very complicate and sparse in shallow water. To increase the performance of underwater acoustic communication system, lots of channel estimation technique has been proposed. In this paper, we proposed the channel estimation based on LMS(Least Mean Square) algorithm which has faster convergence speed than conventional sparse-aware LMS algorithms. The proposed method combines $L_p$-norm LMS with soft decision process. Simulation was performed by using the sound velocity profile which acquired in real sea trial. As a result, we confirmed that the proposed method shows the improved performance and faster convergence speed than conventional methods.

• Journal of Korea Trade
• /
• v.26 no.7
• /
• pp.1-18
• /
• 2022

Purpose - Recent international studies have largely focused on measuring the welfare gains from increased trade varieties. To adequately capture the variety gains, it is of importance to estimate the elasticity of substitution between varieties of trade goods because it is one of the key parameters to determine the magnitude of the variety gains. Using the import data of South Korea, this paper shows that the elasticities vary substantially across the estimators, which affects the magnitude of the gains from trade. Design/methodology - Empirical studies working on the gains from trade variety have heavily depended on the estimation methods for the elasticity of substitution between trade varieties, developed by Feenstra (1994) and refined by Broda and Weinstein (2006). We estimate and compare the estimated elasticities for 8,945 HS 10 goods of South Korea, obtained from the three estimation methods: Feenstra's weighted least square (F-WLS), Feenstra's feasible generalized least square (F-FGLS), and Broda and Weinstein's feasible generalized least square (BW-FGLS). Findings - Using the estimated elasticities from the F-FGLS, considered as a suitable estimator, A typical Korean consumer saved 228 dollars per year by the greater access to new import varieties. This leads to gains from imported variety of 2.06% of GDP. In 2017, a typical Korean consumer would gain by 611 dollars, compared with 2000. China is the country with the largest contribution (28.4%), followed by Japan and USA. About 50% of all the welfare gains come from the imports from the three main trade partners. The Southern Asian countries are more important to the South Korean welfare gain than the Western European countries. Originality/value - Existing studies have chosen one of the methods without any criterion for the choice and then estimated the elasticities of substitution between varieties of trade goods. This paper focuses on the estimation specifications and methods as the cause of the disparity in estimated elasticities and welfare gains from trade variety. According to the Ramsey RESET and White tests, the F-FGLS estimates are relatively better compared to the F-WLS and BW-FGLS estimates. As another contribution, this paper provides the first measure of the welfare gains from trade variety for South Korea, using the estimated elasticities of substitution between trade varieties.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.29-33
• /
• 2007

In this paper, time-varying parameter of passive telemetry RF sensor system is estimated using RLS(Rescursive $\leq$* Square) algorithm. In order to overcome the problems such as power limits and complication that general RF sensor system including IC chip has, the principle of inductive coupling is applied to model sensor system The model parameter is rearranged for applying RLS algorithm based on mathematical model to the derived model using inductive coupling principle. Time variant parameter of rearranged model is estimated using forgetting factor, and in case measured data is contaminated by noise and modelling error, the performance of RLS algorithm characterized by the convergence of squared error sum is verified by simulation.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.688-691
• /
• 2006

This letter addresses the superimposed pilot aided multiuser channel estimation for the uplinks of multi-input multi-output orthogonal frequency-division multiplexing systems. To mitigate the embedded-data effects on the performance of channel estimation, a novel combining algorithm is proposed. Optimal pilot symbols are developed with respect to the least square channel estimate's mean square error. The averaged sum-capacity lower bound is derived and simulated. Simulation results show that on a low signal-to-noise ratio regime, our proposed scheme achieves better performance and higher capacity than the conventional pilot aided approach.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.487-491
• /
• 2008

Tuning of the speed controller in the linear servo applications needs the accurate information of a mover mass including a load mass. Therefore this paper proposes the mass estimation method of a permanent magnet linear synchronous motor(PMLSM) applied at the vertical axis by using the recursive Least-Squares estimation algorithm. First, this paper derives the deterministic autoregressive moving average(DARMA) model of the mechanical dynamic system used at the vertical axis. The application of the Least-Squares algorithm to the derived DARMA model gives the mass estimation method. Matlab/Simulink-based simulation and experimental results show that the total mover mass of a PMLSM applied at the vertical axis can be accurately estimated at both no-load and load conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.529-536
• /
• 2003

In this Paper, a new DCT HLMS DFE(Discrete Cosine Transform Hierarchical Least Mean Square Decision Feedback Equalizer) algorithm is proposed to improve the convergence speed and MSE(Mean Square Error) performance of a receive channel equalizer in ATSC(Advanced Television System Committee) 8VSB(Vestigial Side Band) digital terrestrial TV system. The proposed algorithm reduces the eigenvalue range of input data autocorrelation by transforming LMS (Least Mean Square) DFE into the subfilter of hierarchical structure. Moreover, the use of DCT and power estimation algorithm makes it possible to reduce the eigenvalue deviation of input data which results from distortion and delay of the receive signal in the miulti-path environment. Simulation results show that proposed DCT HLMS DFE has SNR improvement of approximately 3.8dB, 5dB and 2dB as compared to LMS DFE when the equalized symbol error rate is 0.2 in ATTC defined digital terrestrial TV broadcasting channels A, B and F, respectively.