• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.166-166
• /
• 2023

Compound hazards (CHs) are two or more extreme climate events combined which occur simultaneously in the same region at the same time. Compared to individual hazards, the combination of hazards that cause CHs can result in greater economic losses and deaths. While several extreme climate events have been recorded across Asia for the past decades, many studies have only focused on a single hazard. In this study, we assess the spatiotemporal pattern of dry compound hazards which includes drought, heatwave, fire and wind across Asia for the last 42 years (1980-2021) using the historical data from ERA5 Reanalysis dataset. We utilize a daily spatial data of each climate event to assess the occurrence of such compound hazards on a daily basis. Heatwave, fire and wind hazard occurrences are analyzed using daily percentile-based thresholds while a pre-defined threshold for SPI is applied for drought occurrence. Then, the occurrence of each type of compound hazard is taken from overlapping the map of daily occurrences of a single hazard. Lastly, a multivariate assessment are conducted to quantify the occurrence frequency, hotspots and trends of each type of compound hazard across Asia. By conducting a multivariate analysis of the occurrence of these compound hazards, we identify the relationships and interactions in dry compound hazards including droughts, heatwaves, fires, and winds, ultimately leading to better-informed decisions and strategies in the natural risk management.

• 재활복지공학회논문지
• /
• 제8권1호
• /
• pp.9-17
• /
• 2014

전기 자극 청신경 복합활동전위(electrical compound action potential; ECAP)는 인공와우로 청신경을 자극하고 동시에 반응을 기록한다. 이 연구는 인공와우에서 ECAP의 효용성을 높이기 위하여 자극과 기록에 대하여 연구하고자 한다. 대상은 문헌 또는 사례 연구를 제외한 연구 논문 34 편으로 하였다. 연구는 펄스 및 자극 조건, 잡파 억제 및 기록 조건 등을 분석하였다. 효과적인 신경 발화, 안정적인 역치 확인, 신경 퇴행 방지 등을 위해서는 펄스폭과 위상 간격이 가급적 짧고, (-)위상이 앞선 양위상 펄스를 사용하였다. 자극은 펄스 간격, 자극비율, 자극 방식 등을 정하여 와우의 첨부, 중간, 기저회전으로 C-level 정도로 하였다. 잡파는 전방차폐법, 거푸집소거법으로 제거하였고, 분명한 파형을 획득하기 위해서는 전극 간격, 증폭 정도, 평균 가산 회수 등의 추가 조절이 필요하다.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.83-90
• /
• 2004

This paper proposes a tool path generation method for machining impellers with 5-axis machining center. The shape of impeller is complex, being composed of pressure surface, suction surface and leading edge, and so on. The compound surface which is made of ruled surface such as pressure surface and suction surface and leading edge such as fillet surface, makes the tool path generation much complicated. To achieve efficient roughing, cutting area is divided into two region and then tool radius of maximum size that do not cause tool intereference is selected for shortening machining time. In finishing, accuracy is improved using side cutting for blade surface and point milling for leading edge.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3114-3114
• /
• 2001

During the last years phytochemistry and phytopharmaceutical applications have developed rapidly and so there exists a high demand for faster and more efficient analysis techniques. Therefore we have established a near infrared transflectance spectroscopy (NIRS) method that allows a qualitative and quantitative determination of new polyphenolic pharmacological active leading compounds within a few seconds. As the NIR spectrometer has to be calibrated the compound of interest has at first to be characterized by using one or other a combination of chromatographic or electrophoretic separation techniques such as thin layer chromatography (TLC), high performance liquid chromatography (HPLC), capillary electrophoresis (CE), gas chromatography (GC) and capillary electrochromatography (CEC). Both structural elucidation and quantitative analysis of the phenolic compound is possible by direct coupling of the mentioned separation methods with a mass spectrometer (GC-MS, LC-MS/MS, CE-MS, CEC-MS) and a NMR spectrometer (LC-NMR). Furthermore the compound has to be isolated (NPLC, MPLC, prep. TLC, prep. HPLC) and its structure elucidated by spectroscopic techniques (UV, IR, HR-MS, NMR) and chemical synthesis. After that HPLC can be used to provide the reference data for the calibration step of the near infrared spectrometer. The NIRS calibration step is time consuming, which is compensated by short analysis times. After validation of the established NIRS method it is possible to determine the polyphenolic compound within seconds which allows to raise the efficiency in quality control and to reduce costs especially in the phytopharmaceutical industry.

• 농약과학회지
• /
• 제2권1호
• /
• pp.18-23
• /
• 1998

유기합성을 통한 천연물기원 신농약 선도물질을 얻기 위해 피마자잎으로부터 동정된 활성물질 ricinine의 합성방법을 설정한 후 살충활성을 조사하였다. Ricinine은 4단계과정의 cyanoacetic acid 중합반응과 malono nitrile의 단순고리화 반응 2가지 방법으로 합성하였으며 합성 수율은 중합반응보다 단순고리화 반응에서 높은 수율을 나타냈다. 합성된 ricinine및 중간생성물의 살충활성 조사결과 1,000 ${\mu}g/ml$ 농도수준에서 ricinine은 벼멸구와 콩바구미에 대해 각각 80%, 75%의 살충력을 나타냈다. 점박이응애의 경우 분자구조내에 chloride 기가 존재하는 chloronorricinine과 chlororicinic acid가 500 ${\mu}g/ml$ 수준에서 60%의 살충효과를 보여주었으며, 10 ${\mu}g/ml$ 수준에서 빨간집모기 유충에 대한 활성은 chlororicinine이 44%의 살충력을 나타냈다.

• 열처리공학회지
• /
• 제37권2호
• /
• pp.49-57
• /
• 2024

We investigated the changes in microstructure and surface roughness of the compound layer of GC250D gray cast iron, commonly used in brake discs, during gas nitriding. The gas atmosphere of the nitriding process was controlled with a hydrogen partial pressure of 49.5%, and the process was conducted at a nitriding temperature of 520℃ with various process times. As the nitriding process time of the GC250D material increased, both the depth of hardening and the thickness of the compound layer increased, with a maximum surface hardness of approximately 1265 HV_0.1 was measured. Additionally, the surface roughness increased with the process time. Phase analysis of the compound layer revealed an increase in the proportion of the γ' phase as the nitriding process time increased. Changes in the formation of the compound layer were observed depending on the orientation of graphite within the material, leading to the formation of wedges. Therefore, the increase in surface roughness appears to be attributed to the uneven compounds, the expansion of the compound layer and wedges formed on the surface during the nitriding process.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.59-63
• /
• 2010

Immersion Sn plating was produced on Cu foil by distributing nano-sized diamonds (ND). The ND distributed on the coating surface broke the continuity of Sn-oxide layer, therefore leading to penetrate the molten solder through the oxide and retarding the wettability degradation during a reflow process. Furthermore, the ND in the Sn coating played a role of diffusion barrier for Sn atoms and decreased the growth rate of intermetallic compound ($Cu_6Sn_5$) layer during the solid-state aging. The study confirmed the importance of ND to improve the wettability and reliability of the Sn plating. Complete dispersion of the ND within the immersion Sn plating needs to be further developed for the electronic packaging applications.

• 한국중재학회지:중재연구
• /
• 제31권1호
• /
• pp.55-81
• /
• 2021

Awarding interest in international arbitration remains one of the most challenging areas for tribunals and parties given the myriad of issues that arise. This article seeks to provide an overview of how international arbitral tribunals grant delay interest. It reviews the various issues that international arbitral tribunals face concerning pre-award and post-award interest, determining the appropriate interest rate, surrounding simple or compound interest, and the complex issue of choice of law. A comparative context is provided by surveying the laws of major jurisdictions from both the common law and civil law and the regulations of leading arbitral institutions. It concludes with a review of the law, jurisprudence, and practice in Korea related to delay interest and how Korean tribunals under the KCAB Domestic and International Rules have determined delay interest in recent years.

• Journal of Ginseng Research
• /
• 제42권2호
• /
• pp.165-174
• /
• 2018

Background: Extended endoplasmic reticulum (ER) stress may initiate apoptotic pathways in cancer cells, and ER stress has been reported to possibly increase tumor death in cancer therapy. We previously reported that caspase-8 played an important role in compound K-induced apoptosis via activation of caspase-3 directly or indirectly through Bid cleavage, cytochrome c release, and caspase-9 activation in HL-60 human leukemia cells. The mechanisms leading to apoptosis in A549 and SK-MES-1 human lung cancer cells and the role of ER stress have not yet been understood. Methods: The apoptotic effects of compound K were analyzed using flow cytometry, and the changes in protein levels were determined using Western blot analysis. The intracellular calcium levels were monitored by staining with Fura-2/AM and Fluo-3/AM. Results: Compound K-induced ER stress was confirmed through increased phosphorylation of $eIF2{\alpha}$ and protein levels of GRP78/BiP, XBP-1S, and $IRE1{\alpha}$ in human lung cancer cells. Moreover, compound-K led to the accumulation of intracellular calcium and an increase in m-calpain activities that were both significantly inhibited by pretreatment either with BAPTA-AM (an intracellular $Ca^{2+}$ chelator) or dantrolene (an RyR channel antagonist). These results were correlated with the outcome that compound K induced ER stress-related apoptosis through caspase-12, as z-ATAD-fmk (a specific inhibitor of caspase-12) partially ameliorated this effect. Interestingly, 4-PBA (ER stress inhibitor) dramatically improved the compound K-induced apoptosis. Conclusion: Cell survival and intracellular $Ca^{2+}$ homeostasis during ER stress in human lung cancer cells are important factors in the induction of the compound K-induced apoptotic pathway.

• 멤브레인
• /
• 제13권2호
• /
• pp.110-117
• /
• 2003

술폰화 폴리이미드는 클로로알칼리 전기분해, 양이온교환수지 및 연료전지용 고분자진해질막 등과 같은 많은 응용에 있어 유용한 재료로서 연구되어지고 있다. 그러나, 이러한 응용이 이루어지는 과정에 있어서 시간에 따라 연속적인 탈수공정이나 고분자의 분해에 따른 성능 감소 등이 보고되었다. 술폰화 고분자 분해의 주요 원인 중 하나로서 고분자 분자량의 감소 및 고분자 사슬의 절단으로 이끌어지는 가수분해를 들 수 있다. 따라서, 본 연구의 목적은 수화조건 하에서의 $-SO_3$H와 연결된 이미드 사이클과 부가적인 에스테르 결합의 분해를 조사하는 데 있다. 사슬의 분리에 대해 가능한 정확한 정보를 얻고 이를 확인하기 위해서는 $^1H$ 및 $^{13}C$ NMR, FT-IR 분석을 이용했으며, 또한 보다 편리한 분석을 위해서 model compound를 사용하여 실험을 수행하였다. 결과적으로, 술폰화 폴리이미드의 수화안정성을 평가하기 위해서 프탈계 및 나프탈렌계 이미드 고리와 에스테르 결합을 갖는 model compound를 합성하였고, 제조된 model compound를 이용하여 $80^{\circ}C$ 초순수 하에서 aging 실험을 수행하였고, lyophilization technique을 사용하여 반응을 중지시켰다. Aging된 product는 NMR, FT-IR spectroscopy를 이용하여 분석하였다.