• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.228-230
• /
• 2007

In this study, we investigated the change in lead content of canned coffee drinks while kept for 16 weeks in an incubator adjusted to $65^{\circ}C$. Our research aim was to ensure the safety of canned coffee purchased from vending machine and stores. The lead analysis were conducted by graphite furnace atomic absorption spectrometry after wet digestion using concentrated nitric acid. The results showed that the lead contents of all examined samples were very low at a level of not detected to 0.033 mg/L, and below 2 mg/kg, the Korean regulatory limit for the commodity. Also, no increase in lead content was observed over the elapsed time. Therefore, it appears that lead is not a hazard and need not be a concern in drinking canned coffee.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.549-559
• /
• 1994

A subgroup or workers from a secondary lead smelter was defined to include those with blood lead levels not exceeding $80{\mu}g/100\;ml$ and with no pest history of elevated blood lead. Central nervous system symptoms (tiredness, sleeplessness, irritability, headache) were reported by 55% of the group and muscle and joint pain by 39%. Zinc proteporphyrin (ZPP) levels were elevated in 71% or cases. Low hemoglobin levels (less than 14 gm/l00 ml) were round in more than a third of the workers. While BUN and creatinine were mostly in the normal range, there - nevertheless n correlation between ZPP and both BUN and creatinine. Reduced nerve-conduction velocities were present in 25% or the group; this was not significantly different from findings in Ii control group. The data indicate that n blood level of $80{\mu}g/100\;ml$ is an inappropriate biological guide in the prevention or lead disease.

• Atmosphere
• /
• v.22 no.4
• /
• pp.455-464
• /
• 2012

This study investigates a 12 month-lead predictability of PNU Coupled General Circulation Model (CGCM) V1.1 hindcast, for which an oceanic data assimilated initialization is used to generate ocean initial condition. The CGCM, a participant model of APEC Climate Center (APCC) long-lead multi-model ensemble system, has been initialized at each and every month and performed 12-month-lead hindcast for each month during 1980 to 2011. The 12-month-lead hindcast consisted of 2-5 ensembles and this study verified the ensemble averaged hindcast. As for the sea-surface temperature concerns, it remained high level of confidence especially over the tropical Pacific and the mid-latitude central Pacific with slight declining of temporal correlation coefficients (TCC) as lead month increased. The CGCM revealed trustworthy ENSO prediction skills in most of hindcasts, in particular. For atmospheric variables, like air temperature, precipitation, and geopotential height at 500hPa, reliable prediction results have been shown during entire lead time in most of domain, particularly over the equatorial region. Though the TCCs of hindcasted precipitation are lower than other variables, a skillful precipitation forecasts is also shown over highly variable regions such as ITCZ. This study also revealed that there are seasonal and regional dependencies on predictability for each variable and lead.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.461-468
• /
• 2018

A highly sensitive, selective and rapid method for the determination of lead based on the reaction of lead (II) with 5-(4'-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione (CPAHPD) and the solid phase extraction of the Pb(II)-CPAHPD complex with Amberlite XAD-2000 was developed, in the presence of pH 5.6 buffer solution and Triton X-114 medium. CPAHPD reacts with lead to form a violet complex with a molar ratio of 2:1 (CPAHPD to lead). This complex was enriched by the solid phase extraction with Amberlite XAD-2000. An enrichment factor of 500 was obtained by elution of the complex from the resin with a minimal amount of isopentyl alcohol(0.2 mL). In isopentyl alcohol medium,the molar absorptivity of the complex is $1.13{\times}10^6L\;mol^{-1}cm^{-1}$ at 647 nm. Beer's law is obeyed in the range of $5.0-160ng\;mL^{-1}$ in the measured solution. The relative standard deviation for 10 replicate samples of $50ng\;mL^{-1}$ level is 1.26%. The detection and quantification limits reaches 1.5 and $4.7ng\;mL^{-1}$ in the original samples. The presented procedure was successfully applied for determination of lead content in real samples such as vegetables, waters, biological and soil samples with satisfactory results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.248-251
• /
• 2008

During survey of blood lead concentration of workers who worked in lead refining industry, we found that some foreign workers showed increased blood lead level compared with that of domestic workers. The mean concentration of lead in blood for foreign workers (15%, 13 workers, mean age: 29) was 55.8 ug/dL which was over biological exposure index, while that of Korean workers (85%, 76 workers, mean age: 42) was 28.9 ug/dL. Some other biological markers of lead exposure such as ZPP and ${\delta}-ALA$ also showed elevated levels. Most of foreign workers stayed in dormitories near or in the factories that may cause to let them under the condition of 24 hours exposure of lead. The lack of safety manual on proper prevention of lead exposure in their own language for effective communication may be one of reasons of elevated blood lead concentration of foreign workers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.147-147
• /
• 2018

In this article, we use an open source software library: TensorFlow, developed for the purposes of conducting very complex machine learning and deep neural network applications. However, the system is general enough to be applicable in a wide variety of other domains as well. The proposed model based on a deep neural network model, LSTM (Long Short-Term Memory) to predict the river water level at Okcheon Station of the Guem River without utilization of rainfall - forecast information. For LSTM modeling, the input data is hourly water level data for 15 years from 2002 to 2016 at 4 stations includes 3 upstream stations (Sutong, Hotan, and Songcheon) and the forecasting-target station (Okcheon). The data are subdivided into three purposes: a training data set, a testing data set and a validation data set. The model was formulated to predict Okcheon Station water level for many cases from 3 hours to 12 hours of lead time. Although the model does not require many input data such as climate, geography, land-use for rainfall-runoff simulation, the prediction is very stable and reliable up to 9 hours of lead time with the Nash - Sutcliffe efficiency (NSE) is higher than 0.90 and the root mean square error (RMSE) is lower than 12cm. The result indicated that the method is able to produce the river water level time series and be applicable to the practical flood forecasting instead of hydrologic modeling approaches.

• Applied Microscopy
• /
• v.34 no.3
• /
• pp.185-197
• /
• 2004

To investigate the effect of the squalene against the lead toxicity and recovery of renal failure. Healthy male ICR mice were used for experiment. The activity of nitric oxide (NO) was observed after the intraperitoneal injection in mice. The ultrastructural changes of the kidney were observed after the intraperitoneal injection of lead acetate in mice. The experimental groups were divided into three groups. Group 1 was normal mouse. Group 2 was not treatment with squalene after intraperitoneal contamination of lead acetate (30 mg/kg). And, Group 3 was injected squalene (180 mg/kg) after intraperitoneal contamination of lead acetate. All groups were used to 10 mice. The results were as follow: In the case of the group 2, swelling of the outer membrane and destruction of the inner membrane (cristae) of the mitochondria, dripping of the ribosomes from the rough endoplasmic reticulum were happened at 24 hours and 48 hour. These were gradually reparied after 72 hours. In the case of the group 3, damages of the mitochondria and the rough endoplasmic reticulum were showed less than the group 2 at 24 hours. Especially, after 48 hours, these were almost same as the group 1. In the case of group 2, the level of NO was decreased. However, In the case of group 3, the level of NO was increased more than normal as well as repaired the decreased NO level by Pb (P<0.05). It was concluded that the squalene was the protective and recovery effects for the toxicity of the lead in the renal proximal tubules.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.8
• /
• pp.1130-1134
• /
• 2005

An experiment was performed using 20 calves of about one-month old to investigate the effect of chelation therapy with calcium disodium ethylenediaminetetraacetate ($CaNa_2$EDTA) alone or along with antioxidant $\alpha$-tocopherol in lead loaded calves on blood trace minerals, erythrocytic sulfahydryl groups and some haematobiochemical parameters. Fifteen calves were given lead orally at a daily dose of 7.5 mg of 99% pure lead acetate/kg body weight for 28 days. Then the lead was withdrawn on day 28 and the calves were randomly divided into three groups. Each group of five animals was either treated with $CaNa_2$EDTA alone at the dose rate of 110 mg/kg body weight in two divided doses for 4 days or along with $\alpha$-tocopherol at the dose rate of 100 mg/kg body weight orally daily for 7 days, keeping the remaining five calves as lead-exposed untreated controls. Blood samples were collected at the end of the lead exposure (day 0) and thereafter on day 2, 4, 7 and 10 from the start of the chelation treatment. The treatment with EDTA alone led to slow but non-significant improvement in blood copper level, but incorporation of antioxidant $\alpha$-tocopherol in chelation therapy resulted in its significant decline, as recorded on day 7-post treatment. Withdrawal of lead or treatment with $CaNa_2$EDTA alone or along with $\alpha$-tocopherol enhanced the erythrocytic thiol contents and the levels of T-SH and P-SH became statistically (p<0.05) comparable to those of lead-exposed controls by day 7 and 4, respectively. There was no significant (p>0.05) change in serum urea, creatinine, total protein and albumin levels between the treatment groups. It is concluded from the present investigation that treatment with $CaNa_2$EDTA at the present dose rate is safe to be used for chelation in lead loaded calves.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.439-444
• /
• 2021

Background: In a previous study, we estimated exposure prevalence and the number of workers exposed to carcinogens by industry in Korea. The present study aimed to evaluate the optimal exposure intensity indicators of airborne lead exposure by comparing to blood lead measurements for the future development of the carcinogen exposure intensity database. Methods: Data concerning airborne lead measurements and blood lead levels were collected from nationwide occupational exposure databases, compiled between 2015 and 2016. Summary statistics, including the arithmetic mean (AM), geometric mean (GM), and 95th percentile level (X95) were calculated by industry both for airborne lead and blood lead measurements. Since many measurements were below the limits of detection (LODs), the simple replacement with half of the LOD and maximum likelihood estimation (MLE) methods were used for statistical analysis. For examining the optimal exposure indicator of airborne lead exposure, blood lead levels were used as reference data for subsequent rank correlation analyses. Results: A total of 19,637 airborne lead measurements and 32,848 blood lead measurements were used. In general, simple replacement showed a higher correlation than MLE. The results showed that AM and X95 using simple replacement could be used as optimal exposure intensity indicators, while X95 showed better correlations than AM in industries with 20 or more measurements. Conclusion: Our results showed that AM or X95 could be potential candidates for exposure intensity indicators in the Korean carcinogen exposure database. Especially, X95 is an optimal indicator where there are enough measurements to compute X95 values.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.