• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.301-301
• /
• 2010

현재 전 세계는 앞으로 사용 될 대체 에너지에 많은 관심 가지고 있다. 지금 사용하고 있는 에너지 연료는 한정되어 있기 때문에 대체에너지에 대한 연구가 활발히 진행 되고 있다. 그 중 압전체를 이용한 에너지 하베스팅은 많은 주목을 받고 있다. 주변 환경에서 필요한 에너지를 끌어 쓸 수 있는 대표적인 청정에너지 시스템 중 하나이기 때문이다. 최근 전원 공급원으로써 에너지 수확 시스템은 현 사회에 사용되고 있는 배터리로 전원을 사용하는 제품들을 소용량과 저전압 분야에서의 에너지 수확의 원리를 이용하여 전기전자제품의 사용시간 연장 및 응용분야 확대를 시도하는 연구가 활발히 수행되고 있다. 압전세라믹스를 이용한 에너지 하베스팅은 진동에너지를 전기에너지로 변환하는 것으로서 압전 특성이 높아야 한다. 일반적으로 압전 세라믹스는 PbO 성분이 들어가므로 환경적 오염 뿐만 아니라 인체에도 영향이 좋지 않으므로 많은 나라에서 이러한 성분을 제한하고 점차적으로 줄어들고 있는 시점에서 PbO를 사용하지 않고 Lead-Free 세라믹를 사용한 연구가 진행되고 있다. 이 논문에서는 일반적인 소결 방법을 이용하여 (Na,K)NbO3 세라믹에 CeO2를 첨가한 압전 세라믹을 제작하였다. 제작된 압전 세라믹스로 에너지 하베스팅 소자를 제작하고, 이 소자로 수확된 에너지로 DC-DC Converter 응용 특성에 대하서 연구하였다. 압전 세라믹스의 좋은 압전 특성을 출력하기 위하여 캔틸레버의 고유 진동수가 진동원의 주파수와 일치하는 공진을 일으켜야 한다. 따라서 구동회로는 주파수원을 찾아 설계하였고, 압전 세라믹스의 진동은 가진기를 이용하여 구동실험을 하였다. 지금까지 나와있던 에너지 하베스팅 회로와 비교하여 그 특성을 분석하고, 시뮬레이션 및 실험을 통하여 검증하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.328-328
• /
• 2010

압전 세라믹스는 엑츄에이터 및 센서 등의 다양한 응용분야로 인하여 많은 연구가 진행되어왔다. 최근 친환경 무연 압전계인 Bi층상구조 (BNT) 및 알칼리 니오븀산화물계 (KNN)에 대한 연구가 집중되고 있다. 한편, 소형화 및 고성능의 압전소자에 대한 요구 증가로 고가의 내부전극인 Ag, Ag-Pd합금으로 이루어진 적층압전소자에 대한 연구개발이 진행되어 왔다. 본 연구에서는 Ni이나 Cu를 내부전극으로 사용하는 적층압전소자의 개발가능성을 타진하고자 Ni의 산화를 억제할 수 있는 환원분위기 소결시에 압전소재의 상변화 및 내환원성 정도를 조사하였다. 압전소재인 BNT 및 KNN를 공기중에서 합성한 후, 환원분위기의 영향을 조사하고자 샘플을 디스크 형태로 성형하여 $1000{\sim}1200^{\circ}C$에서 2 시간 동안 공기, 중성 (N2) 와 환원 분위기 (3 % H2 - 97 %의 N2) 에서 소결한 후 미세구조와 전기적 특성을 SEM, EDS, XRD, impedance analyzer로 조사였다. 환원분위기에서 소결된 BNT 샘플은 페롭스카이트 상이 관찰되지 않았으며, SEM/EDS 분석결과 시편의 표면에 Bi의 석출이 관찰되었다. KNN의 경우에는 공기중에서 소결 시편뿐만 아니라 환원분위기에서 소결된 시편에서도 페롭스카이트 구조를 보였으며, EDS분석결과 K 및 Na의 휘발이 비교적 적었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.327-327
• /
• 2008

Lead-free $(K_{0.5}Na_{0.5})NbO_3$ 압전 세라믹스는 다양한 광소자로의 응용과 압전 특성, 초전 특성을 이용한 압전 소자로의 응용이 가능한 재료로 보고되고 있다. 그러나 KNN계 압전소재 특성상 판상 형태의 결정립으로 인해 낮은 소결 밀도를 갖게 되고, 그로인해 압전물성의 저하를 초래하는 문제점을 가지고 있다. 따라서, 본연구에서는 다양한 밀링 방법을 적용하여 입자 사이즈를 작게 하고 소성체의 결정립을 구형화 함으로써 저온소결에서의 압전물성을 개선시키고자 한다. $(K_{0.5}Na_{0.5})NbO_3$를 기계적 분쇄법에 의해 입자사이즈에 따라 변화되는 상의 분석과 압전체로서의 특성을 관찰하였다. 결정학적 상분석 및 미세 조직은 XRD, SEM을 이용하여 관찰하였고, Capacitance는 Impedance analyzer(HP4192A)로 측정하였으며, Impedance 주파수 특성은 Network Analyzer로 측정하여 Kp, Kt와 Qm을 측정하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.764-768
• /
• 2016

To investigate excess $Na^+$ effect, $Bi_{0.5}(Na_{0.78+x}K_{0.22})_{0.5}TiO_3$ ($0{\leq}x{\leq}0.05$) (BNKT) ceramics were prepared by using a conventional solid-state reaction method. The structure and ferroelectric properties of BNKT ceramics were characterized by XRD (X-ray diffraction) and polarization dependence by external electric field. Also, the temperature dependence of dielectric constant and loss were studied. From these results, it was found that appropriate excess $Na^+$ into BNKT ceramics compensate the volatility and induce dense ceramics. The enhanced piezoelectric coefficient (158 pC/N) and depolarization temperature ($202^{\circ}C$) were obtained for the x=0.01 composition.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.93-105
• /
• 2016

KNN-based ceramics modified with small amounts of $Bi_4Zr_3O_{12}$ (BiZ) has been synthesized using high-throughput experimentation (HTE). The results from X-ray diffraction show that for samples with base composition $(K_{0.5}Na_{0.5})NbO_3$ (KNN), the phase present changes from orthorhombic to pseudo-cubic with more than 0.2 mol% BiZ addition; for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.9}Ta_{0.1})O_3$ (KNNLT), the phase present changes from a mixture of orthorhombic and tetragonal symmetry to pseudo-cubic with more than 0.4 mol % while for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.86}Ta_{0.1}Sb_{0.04})O_3$ (KNNLST), the phase present is tetragonal with <0.3 mol% BiZ addition and transforms to pseudo-cubic with more dopant addition. The microstructures of the samples show that addition of BiZ decreases the average grain size and increases the volume of pores at the grain boundaries. The values of dielectric constant for KNN and KNNLT compositions increase slightly with BiZ addition while that for KNNLST decreases gradually with BiZ addition. The dielectric loss values are between 0.02 and 0.04 for KNNLT and KNNLST compositions while they are ~ 0.05 for KNN samples. The resistivity values increases with BiZ addition and values in the range of $10^{10}{\Omega}cm$ and $10^{12}{\Omega}cm$ are obtained. The piezoelectric charge coefficient ($d{^*}_{33}$) is highest for KNNLST samples and decreases gradually from ~400 pm/V to ~100 pm/V with BiZ addition.

• Smart Structures and Systems
• /
• v.15 no.1
• /
• pp.135-150
• /
• 2015

Large concrete structures are prone to cracks and damages over time from human usage, weathers, and other environmental attacks such as flood, earthquakes, and hurricanes. The health of the concrete structures should be monitored regularly to ensure safety. A reliable method of real time communications can facilitate more frequent structural health monitoring (SHM) updates from hard to reach positions, enabling crack detections of embedded concrete structures as they occur to avoid catastrophic failures. By implementing an unconventional mode of communication that utilizes guided stress waves traveling along the concrete structure itself, we may be able to free structural health monitoring from costly (re-)installation of communication wires. In stress-wave communications, piezoelectric transducers can act as actuators and sensors to send and receive modulated signals carrying concrete status information. The new generation of lead zirconate titanate (PZT) based smart aggregates cause multipath propagation in the homogeneous concrete channel, which presents both an opportunity and a challenge for multiple sensors communication. We propose a time reversal based pulse position modulation (TR-PPM) communication for stress wave communication within the concrete structure to combat multipath channel dispersion. Experimental results demonstrate successful transmission and recovery of TR-PPM using stress waves. Compared with PPM, we can achieve higher data rate and longer link distance via TR-PPM. Furthermore, TR-PPM remains effective under low signal-to-noise (SNR) ratio. This work also lays the foundation for implementing multiple-input multiple-output (MIMO) stress wave communication networks in concrete channels.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.341-345
• /
• 2012

[Li0.055(K0.5Na0.5)0.945](Nb1-xTax)O3 (0.05 ≤ x ≤ 0.25) ceramics were prepared by the partial sol-gel (PSG) method to improve the microstructure homogeneity of Ta5+ ion and were compared to those prepared by the conventional mixed oxide (CMO) method. For the PSG method, Ta(OC2H5)5 was directly reacted with calcined [Li0.055(K0.5Na0.5)0.945]NbO3 powders and the specimens sintered at 1100 ℃ for 5 hrs showed a single phase with a perovskite structure. Compared to the specimens prepared by conventional mixed oxide powders, the relative ratio of tetragonal phase to orthorhombic phase of the sintered specimens prepared by Ta(OC2H5)5 was larger than that of the sintered specimens prepared by Ta2O5. The electromechanical coupling factor (kp), piezoelectric constant (d33) and dielectric constant (εr) of the sintered specimens were increased with Ta5+ content. These results could be attributed to the decrease of the orthorhombic-tetragonal polymorphic phase transition temperature (To-t), which could be evaluated by oxygen octahedral distortion. Strain of the sintered specimens prepared by the PSG method was higher than that of specimens prepared by the CMO method due to the increase of relative density. The effects of crystal structure on the strain characteristics of the specimens were also discussed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.79-91
• /
• 2006

A new methodology of guided wave based nondestructive testing (NDT) is developed to detect crack damage in civil infrastructures such as steel bridges without using prior baseline data. In conventional guided wave based techniques, damage is often identified by comparing the "current" data obtained from a potentially damaged condition of a structure with the "past" baseline data collected at the pristine condition of the structure. However, it has been reported that this type of pattern comparison with the baseline data can lead to increased false alarms due to its susceptibility to varying operational and environmental conditions of the structure. To develop a more robust damage diagnosis technique, a new concept of NDT is conceived so that cracks can be detected without direct comparison with previously obtained baseline data. The proposed NDT technique utilizes the polarization characteristics of the piezoelectric wafers attached on the both sides of the thin metal structure. Crack formation creates Lamb wave mode conversion due to a sudden change in the thickness of the structure. Then, the proposed technique instantly detects the appearance of the crack by extracting this mode conversion from the measured Lamb waves even at the presence of changing operational and environmental conditions. Numerical and experimental results are presented to demonstrate the applicability of the proposed technique to crack detection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.