• Journal of the korean society of oceanography
• /
• 제37권2호
• /
• pp.76-81
• /
• 2002

I investigated whether US naval pulp wastes (pulverized paper products), which is planned to be dumped into offshore waters, may affect the ecology of major components of marine zooplankton. The presence of slurry (0.6% concentration - wet weight ; wet weight) did not significantly affect the population growth rates of the heterotrophic dinoflagellate Polykrikos kofoidii fed on Lingulodinium polyedrum, but significantly reduced the ingestion rates of the calanoid copepods Acartia spp. on L. polyedrum and those of the copepod Calanus pacificus on Akashiwo sanguinea (previously Gymnodinium sanguineum). However, C. pacificus, originally exposed to 0.6% slurry for 24 hour, can recover its feeding rates when slurry disappears. Therefore, if slurry is diluted quickly due to trubulence after being dumped at 0.6% concentration, its presence may not affect Calanus. Chemicals leached from slurry did not affect the feeding rate of Calanus. Therefore, mechanical interference by slurry on the feeding and/or swimming of copepods may be mainly responsible for the reduction of the ingestion rates.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.202-208
• /
• 2001

Aluminum dross should be recycled in consideration of characteristics of the dross and its reutilization after processing. In this study, aluminum dross generated in the domestic secondary aluminum industry was processed to use it as raw material for producing aluminum hydroxide. Sample dross was classified according to its size. The dross smaller than 1mm was leached with sodium hydroxide solution to extract the remaining aluminum from the dross into the solution, and then aluminum hydroxide precipitate was recovered from the leach liquor. Purity of the obtained aluminum hydroxide was above 98 percent, and particle size of the sample was in range of 3-39${\mu}{\textrm}{m}$. From the result, it was suggested that this process could be applicable to recycling of aluminum dross.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.73-77
• /
• 2003

Red mud is a waste material formed during the production of alumina when the bauxite ore is subjected to caustic leaching. It is a brick-red colored highly alkaline (pH 10-12) sludge containing mostly oxides of iron, aluminum, titanium, and silica. Red mud, due to its high aluminum, iron, and calcium contents, has been suggested as a cheap adsorbent for removal of toxic metals (e.g., As, Cr, Pb, Cd) as well as for water or wastewater treatment. The basic advantage of red mud is its versatility in application. This study was conducted to evaluate the effect of red mud on stabilization and fixation of heavy metals (such as Pb, Cu, C $r^{6+}$, Cd, Zn) contained in the Al-coating sludge and soil. The results showed that the concentration of heavy metals leached from the treated sludge and soil was low, meeting the regulatory permit level.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2004년도 춘계임시총회 및 제23회 학술대회
• /
• pp.128-132
• /
• 2004

알루미늄 폐드로스 내에 잔류하는 금속 알루미늄을 수산화나트륨용액으로 침출, 분리시켜서 수산화알루미늄으로 제조하는 과정에서 침출잔사가 발생된다. 본 연구에서는 이 침출잔사를 세척, 건조, 배소하여 알루미나질 캐스타블 내화물과 같은 세라믹 원료로 재활용하는 연구를 수행하였으며, 상용화를 위하여 파일롯트 플랜트 시험을 수행하였다. 시험 생산라인은 년간 1,000톤의 폐드로스를 처리하여 약 700톤의 세라믹 원료를 생산할 수 있는 규모이다. 생산라인의 시운전 결과 상용화를 위해서는 건조기의 개선이 필요하고, Na, Fe 등 불순 성분들이 시료에 유입되는 것을 줄여야 하는 문제점들을 파악할 수 있었으며, 개발한 기술의 상용화 적용 가능성을 확인할 수 있었다.

• Applied Microscopy
• /
• 제46권3호
• /
• pp.160-163
• /
• 2016

Effect of dealloying condition on the formation of nanoporous structure in melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy has been investigated in the present study. In as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy spinodal decomposition occurs in the undercooled liquid during cooling, leading to amorphous phase separation. By immersing the as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy in 5 wt% HCl solution, Al-rich amorphous region is leached out, resulting in an interconnected nano-porous $GeO_x$ with an amorphous structure. The dealloying temperature strongly affects the whole dealloying process. At higher dealloying temperature, dissolution kinetics and surface diffusion/agglomeration rate become higher, resulting in the accelerated dealloying kinetics, i.e., larger dealloying depth and coarser pore-ligament structure.

• 환경위생공학
• /
• 제16권1호
• /
• pp.53-60
• /
• 2001

In this study, the heavy metals in tannery sludge were solidified by using cement and power plant fly ash. Solidification characteristics were discussed with the compressive strength and chromium leaching characteristics of solids. The compressive strength of cement mortar was increased by the amount of fly ash up to 24.3~33.8%, which was considered the results of pozzolanic reaction. When the content of fly ash was 20%, cement mortar showed the highest value $295kg/\textrm{cm}^2$ for 28 days curing. At early curing days, solidified chromium tannery sludge solids were showed lower compressive strength because of the retard on the hydration of cement, but the compressive strength was recovered to be more than $140kg/\textrm{cm}^2$ for 28 days curing regardless with the amounts of fly ash. Also, the results of leaching tests by KSM and TCLP method were showed that the solidified chromium sludge have leached out 0.3~2.2% and 11~17%, respectively.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.135-144
• /
• 1994

Silicon carbide powder was prepared from mixtures of Sangdong silica sand and carbon black by SHS (Self propagating High temperature Synthesis) method which utilizes magnesiothermic reduction of silica. In the powder preparation process, the reacted powder was leached by chloric acid to remove the magnesium oxide and was subsequently roasted to remove free carbon. The impurities were mostly eliminated by hot acid treatment. The resultant SiC powder showed the mean particle size of 0.22 ${\mu}{\textrm}{m}$ and the specific surface area of $66.55 m^2/g$. The SiC powder was mixed with 1 wt% of boron and of carbon to increase densification rate. The mixed powder was pressed and sintered pressurelessly at $2100^{\circ}C$ for 30 min in argon gas. The sintered body showed the hardness of $2550 kg{\cdot}f/mm^2$ and the fracture toughness, KIC of $3.47 MN/m^{3/2}$.

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.255-263
• /
• 1992

Pasting characteristics and amylose-surfactant complex forming ability of sweet potato starch were investigated after defatting and the addition of surfactants, such as SSL (sodium steamyl-2-lactylate) Dimodan (mono/di glyceride) and SE (sucrose ester) with different concentrations. All starch granules were smooth and round, there were no damages to starch granules after defatting and surfactant addition. amylose content of surfactant added stach decreased and me order of decrease was SSL, SE and Dimodan. The cornplex forming ability of SE added starch increased according to increasing HLB value. As surfactants concentration increased, amylose complex formig ability increased. In case of gelatinization patterns by amylograph, the initial pasting temperature of surfactant added starches was higher than mat of untreated or defatted starches, but viscosity at each temperature were all decreased. Soluble carbohydrate and leached amylose of starches increased at increasing temperature, those of surfactant added starches decreased at each temperature in the order of SSL, SE and Dimodan.

• 한국농림기상학회지
• /
• 제1권2호
• /
• pp.110-118
• /
• 1999

This experiment was conducted to characterize the vertical transport trend of dissolved elements through throughfall, stemflow, effluent from Ao layer, and leachate out of soil profile on Pinus koraiensis stand in Experimental Forest of Kyunghee University, located in Kwangju, Kyunggi province for 12 months from July, 1998 to Jun, 1999. In addition, we investigated the content of dissolved elements and the factors influencing the water chemistry concentrations separately collected from the field. Water movement in the process of throughfall and stemflow from precipitation, and rainfall leached from Ao layer into soil water was governed by concentration of through fall, precipitation, rainfall intensity, seasonal variation, and other factors. Also, smaller changes of pH in soil water than that of dissolved elements in soil water could contribute buffer capacity, as well as balancing the concentration between cations and anions.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.15-20
• /
• 1988

In this study, the specimens of cement clinker minerals such as 80C3-S-15C4AF-5C3A added various blending materials were immersed in artificial seawater. In order to ascertain the effect of SO3 and blending materials on seawater resistance of the specimens, the acceleration experiment in the artificial seawater was carried out by repeating of immersion and drying operation periodically. As inner part of the specimen immersed in artificial seawater, Friedel's salt was produced by reaction with Cl ion. In outer part of the specimen, gypsum and ettringite were mainly formed. With the increase of SO3 content in the specimen the formation of ettringite was increased and Frieldel's salt in inner part was decreased. Total pore volume of the specimens was increased according to the amount of Cl ion penetrated and Mg(OH)2 leached in the solution.