• 물과 미래
• /
• 제29권5호
• /
• pp.235-244
• /
• 1996

호수에서의 수직온도분포를 모의하기 위하여, 수리학적 특성 즉 유속분포가 필요없는 일차원 와확산모델 및 혼합층모델이 개발, 적용되었으며 각 모델의 결과가 비교, 검토되었다. 전자는 지배방정식 유도시 분자확산을 모델적용시 년간 수면변화를 무시했으며, 후자는 간단한 해석을 위하여 일정한 층의 두께를 가정하였다. 호수표면과 바닥에서의 온도경계조건이 각각 열 에너지의 이동에 의해서 결정되도록 하는 와확산모델은 explicit 유한차분법을, 두층을 이용하는 혼합층모델은 Runge-Kutta 방법을 사용하였다. 측정된 데이타와 와확산모델 및 혼합층모델의 계산치와 비교해본 결과, 만족한 결과를 도출하였다. 따라서, 호수관리의 수단으로 이 모델들을 유용하게 이용할 수 있을 것으로 사료된다.

• Wind and Structures
• /
• 제5권6호
• /
• pp.543-562
• /
• 2002

The main purpose of this study is to discuss the design wind loads for the structural frames of single-layer latticed domes with long spans. First, wind pressures are measured simultaneously at many points on dome models in a wind tunnel. Then, the dynamic response of several models is analyzed in the time domain, using the pressure data obtained from the wind tunnel experiment. The nodal displacements and the resultant member stresses are computed at each time step. The results indicate that the dome's dynamic response is generally dominated by such vibration modes that contribute to the static response significantly. Furthermore, the dynamic response is found to be almost quasi-static. Then, a series of quasi-static analyses, in which the inertia and damping terms are neglected, is made for a wide range of the dome's geometry. Based on the results, a discussion is made of the design wind load. It is found that a gust effect factor approach can be used for the load estimation. Finally, an empirical formula for the gust effect factor and a simple model of the pressure coefficient distribution are provided.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.771-774
• /
• 2000

RP techniques have inherent disadvantages caused by their working principles: stair-stepped surface of parts due to layer-by-layer stacking of layers, low build speed caused by line-by-line solidification to finish one layer, and post processing to improve surface finish, etc. The objective of this study is to propose a new RP technique, variable deposition manufacturing (VDM), which can make up for the disadvantages of the existing RP techniques, and to develop an apparatus to implement the technique. The proposed process can greatly reduce the building time and improve the surface finish of parts generated. The experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Based on the results, some simple shapes such as a line-shape. an S-shape, and a circle-shape were fabricated from Ethylene Vinyl Acetatecopolymer (EVA). In order to examine the applicability of VDM to more general shapes, a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as the first trial approach. The present basic study has shown the possibility of a practicable utilization of the proposed VDM process to prototyping of a general three-dimensional shape.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.221-231
• /
• 2011

A joint multipath routing algorithm and channel allocation and scheduling for wireless multihop and multichannel systems is discussed. In packet transmission, distribution of packets to multiroutes makes it possible to reduce the transmission cost of the channels. Cross-layer cooperation of routing, channel allocation, and scheduling is an effective method of packet distribution. As a framework for the cooperation, we propose a multiroute distance vector routing (MDVR) scheme. In the MDVR scheme, the routing table is logically placed in between the routing and link layers, and the table plays the role of a service access point between these two layers. To evaluate the performance of MDVR, simulation is performed in a multichannel, multihop environment. The simulation results show that the MDVR framework can be efficiently implemented in the form of a distributed routing algorithm. It is also shown that in MDVR, the system-wise channel efficiency is almost 25% higher than that in a conventional single-route routing approach.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.576-580
• /
• 2006

Snoop 프로토콜은 무선 랜 환경에서 발생하는 TCP 패킷 손실을 효과적으로 보상하여 TCP 전송률을 향상시킬 수 있는 효율적인 프로토콜이다. 하지만, 무선 링크에서 Burst loss가 발생하는 경우에는 지역 재전송을 효과적으로 수행하지 못하여 전송 효율이 떨어진다는 문제점이 있다. 본 논문에서는 Snoop 프로토콜의 이러한 문제점을 개선하기위해 cross layer 기법을 적용한 지역 재전송 기법인 $A^2Snoop$ (ARQ Assistance Snoop) 프로토콜을 제안한다. $A^2Snoop$ 프로토콜은 현재 무선 랜 환경에서 가장 널리 사용되는 IEEE 802.11 MAC 프로토콜 기반의 지역 재전송 메커니즘으로서, MAC 계층의 ARQ 기법의 메시지와 새로이 제안된 지역 재전송 타이머에 의해 효율적인 재전송을 수행한다. ns-2 시뮬레이터를 이용한 실험을 통해 $A^2Snoop$의 지역 재전송 기법은 무선 구간의 Burst loss에 대해 효율적인 보상을 수행하며, 이동 단말의 에너지 효율성을 향상시키는 것을 확인할 수 있다.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

In this paper, a reconfigurable flight control system is designed by applying the sliding mode control scheme. The sliding mode control method is a nonlinear control method which has been widely used because of its merits such as robustness and flexibility. In the sliding mode controller design, the signum function is usually included, but it causes the undesirable chattering problem. The chattering phenomenon can be avoided by using the saturation function instead of signum function. However, the boundary layer of the sliding surface should be carefully treated because of the use of the saturation function. In contrast to the conventional approaches, the thickness of the boundary layer of our approach does not need to be small. The reachability to the boundary layer is guaranteed by the sliding mode controller. The fault detection and isolation process is operated based on a sliding mode observer. To evaluate the reconfiguration performance, a numerical simulation using six degree-of-freedom aircraft dynamics is performed.

• Wind and Structures
• /
• 제7권6호
• /
• pp.373-392
• /
• 2004

This paper presents a methodology for spatial extrapolation of wind-induced pressure time series from a corner bay to roof locations on a low building away from the corner through the application of proper orthogonal decomposition (POD). The approach is based on the concept that pressure time series in the far field can be approximated as a linear combination of a series of modes and principal coordinates, where the modes are extracted from the full roof pressure field of an aerodynamically similar building and the principal coordinates are calculated from data at the leading corner bay only. The reliability of the extrapolation for uplift time series in nine bays for a cornering wind direction was examined. It is shown that POD can extrapolate reasonably accurately to bays near the leading corner, given the first three modes, but the extrapolation degrades further from the corner bay as the spatial correlations decrease.

• Wind and Structures
• /
• 제20권1호
• /
• pp.59-74
• /
• 2015

A coupled model system for Wind Resource Assessment (WRA) was studied. Using a mesoscale meteorological model, the Weather Research and Forecasting (WRF) model, global-scale data were downscaled to the inner nested grid scale (typically a few kilometers), and then through the coupling Computational Fluid Dynamics (CFD) mode, FLUENT. High-resolution results (50 m in the horizontal direction; 10 m in the vertical direction below 150 m) of the wind speed distribution data and ultimately refined wind farm information, were obtained. The refined WRF/FLUENT system was then applied to assess the wind resource over complex terrain in the northern Poyang Lake region. The results showed that the approach is viable for the assessment of wind energy.

• 한국지능시스템학회논문지
• /
• 제2권1호
• /
• pp.17-32
• /
• 1992

로보트 매니퓰레이터의 신경 제어기 구성에 널리 사용하는 다층 신경회로망은 로보트의 불확실한 동적 파라메터 변화에 대한 강건한 학습 적응능력, 그리고 병렬 처리를 통한 실시간 제어등의 장점들을 갖고있다. 그러나 대표적인 학습방법인 오차 역전파(error back propagation) 알고리즘은 그 학습 속도가 느리다는 문제점을 갖는다. 본 논문에서는 불확실하고 애매한 정보를 언어적인 방법에 의해 효율적으로 처리할 수 있는 퍼지 논리 (fuzzy logic)를 도입하여 로보트 매니퓰레이터 신경 제어기의 학습 속도를 개선하기위한 한 방법을 제안한다. 제안된 제어기의 효용성은 PUMA 560 로보트의 모의 실험을 통해 입증된다.

• 한국정보과학회논문지:정보통신
• /
• 제36권4호
• /
• pp.351-359
• /
• 2009

CDMA2000 1xEV-DO 이동통신 시스템에서 주문형 비디오 서비스를 고품질로 제공하면서도 합리적 수준의 시스템 성능을 제공하는 무선 MAC 스케줄러를 재안한다. 제안하는 스케줄러는 응용 계층에 존재하는 비디오 데이터 정보를 MAC 계층에 존재하는 스케줄러가 활용하여 주문형 비디오 서비스의 품질이 개선되도록 한다. 우리는 시뮬레이션 실험을 통해서 제안하는 방식이 이전에 제안된 비디오 트레이스 방식과 비교 했을 때 VBR(Variable-Bit-Rate) 비디오의 비디오 프레임 변화가 클수록 더 뛰어난 품질과 성능을 제공함을 보인다.