• Journal of Periodontal and Implant Science
• /
• v.30 no.1
• /
• pp.187-203
• /
• 2000

The precipitation of calcium phosphate on implant surface has been known to accelerate osseointegration and to enhance osseous adaptation. The present study was performed to examine whether the precipitation of calcium phosphate on Ti-6Al-4V alloy could be affected by the immersion in NaOH solution and heat treatment. Ti-6Al-4V alloy plates of $15{\times}3.5{\times}1mm$ in dimension were polished sequentially from #240 to #2,000 emery paper and one surface of each specimen was additionally polished with $0.1{\mu}m$ alumina paste. Polished specimens were soaked in various concentrations of NaOH solution(0.1, 1.0, 3.0, 5.0, 7.0, 10.0 M) at $60^{\circ}C$ for 24 hours for alkali treatment, and 5.0 M NaOH treated specimens were heated for 1 hour at each temperature of 400, 500, 600, 700, $800^{\circ}C$. After the alkali and heat treatments, specimens were soaked in the Hank's solution with pH 7.4 at $36.5^{\circ}C$ for 30days.The surface ingredient change of Ti-6Al-4V alloy was evaluated by thin-film X-ray diffractometer(TF-XRD) and the surface microstructure was observed by scanning electron microscope(SEM), and the elements of surface were analyzed by X-ray photoelectron spectroscopy(XPS). The results were obtained as follows ; 1. The precipitation of calcium phosphate on Ti-6Al-4V alloy was accelerated by the immersion in NaOH solution and heat treatment. 2. In Alkali treatment for the precipitation of calcium phosphate on Ti-6Al-4V alloy, the optimal concentration of NaOH solution was 5.0 M. 3. In heat treatment after alkali treatment in 5.0 M NaOH solution, the crystal formation on alloy surface was enhanced by increasing temperature. In heat treated alloys at $600^{\circ}C$, latticed structure and prominences of calcium phosphate layer were most dense. On heat treated alloy surface at the higher temperature(${\geq}700^{\circ}C$), main crystal form was titanium oxide rather than apatite. The above results suggested that the precipitation of calcium phosphate on the surface of Ti-6Al-4V alloy could be induced by alkali treatment in 5.0 M-NaOH solution and by heat treatment at $600^{\circ}C$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.197-210
• /
• 2000

Surface roughness is one of implant surface topography and it's found that surface roughness characterizations, such as surface energy, oxide layer thickness and its chemical composition, are closely correlated if the roughness is changed. Several studies showed the importance of analyzing surface structure so the surface structure of thread implant was analyzed to measure the implant quality exactly. In this study, surface roughness of 4 implants - MK $II^{(R)}$(Nobel Biocare), $RBM^{(R)}$(Life-Core, USA), $Osseotite^{(R)}$(3i, USA), $TPS^{(R)}$(Life-Core, USA) - were measured using $Accura^{(R)}$ and 40 implants were installed into 4 sets of ten bovine ribs based on the parameters from the measurements. From this test, the following conclusions for the initial stability were drawn by measuring and comparing RFA, Periotest Value (PTV), Removal Torgue Value (RTV). 1. $R_a$ value in surface roughness measurement was increasing by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ and $R_q$ value was the same order. 2. $R_q$ value in each section was observed to increase by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ in top and $MKII^{(R)}$, $RBM^{(R)}$, $Osseotite^{(R)}$, $TPS^{(R)}$ in mid-section but the value of $MKII^{(R)}$ bottom was the lowest, followed by $Osseotite^{(R)}$, $RBM^{(R)}$ and $TPS^{(R)}$. 3. RFA increased by the order of $RBM^{(R)}$(7042Hz), $MKII^{(R)}$(7047Hz), $Osseotite^{(R)}$(7076Hz), $TPS^{(R)}$(7168Hz) and there was no significance between each group. 4. PTV was increasing by the order of $MKII^{(R)}$(-1.62), $TPS^{(R)}$(-1.92), $Osseotite^{(R)}$ & $RBM^{(R)}$(-2.08) and there was no significance, either. 5. Removal torque in RTV measurement showed the increasing order of $MKII^{(R)}(5.31kgf{\cdot}cm)$, $Oeeotite^{(R)}(5.71kgf{\cdot}cm)$, $TPS^{(R)}(5.92kgf{\cdot}cm)$ and $RBM^{(R)}(7.24kgf{\cdot}cm)$ and there was no significance among groups. Above observations explains that surface roughness does not make any impact on the initial stability of implants installation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.2
• /
• pp.113-119
• /
• 2015

The measurement of hydration level in the surface layer of the skin, stratum corneum (SC), gives important information on the biophysical properties and function of the skin barrier such as softness, flexibility, and healthiness of the skin. But it is difficult to measure a consistent hydration level from a sample to another sample due to individual variations and environmental changes. The aim of this study was to evaluate objective hydration after using various products in the SC. The SC Hydration was measured by capacitance (Corneometer$^{(R)}$, C+K, Germany) on the ventral site of forearm from 40 healthy volunteers. The skin surface was chronologically measured immediately after application of the test products and 3 and 6 hours later. We analyzed the averages of five measurements of each site and used the hydration increase rate for correction on untreated site variation. We found that most polyols including glycerol and butylenes glycol influenced directly the hydration increase rate in the SC previously. In this study, glycerol was used to prepare the standard products from 0 to 20 percents and applied to the same volunteers. The individual standard curve showed linear relation to glycerol concentrations. Based on the the standard curve, hydration of SC was converted into hydration increase rate to glycerol concentrations. The converted glycerol concentrations of products were repetitive and reproducible. In addition, the individual standard curve was used to relate the skin type of each individual. These results suggest that the hydration of the SC standardized regardless of external variation and individual skin condition can explain detailed skin state variation. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with other methods for noninvasive measurement.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.2
• /
• pp.159-166
• /
• 2013

In order to develop new skin whitening agents, we prepared the EtOAc layer (AJE) after enzyme treatment of 75% EtOH extract of the Alnus Japonica Steud. We measured their tyrosinase inhibitory activity in vitro and melanin synthesis inhibitory activity in B16-F1 melanoma cells. They did not show inhibitory activity against mushroom tyrosinase but showed melanin synthesis inhibitory activity in a dose-dependent manner. In a melanin synthesis inhibition assay, AJE suppressed melanin production up to 52% at a concentration of $40{\mu}g/mL$. To elucidate the mechanism of the inhibitory effects of AJE on melanogenesis, we measured expression of melanogenesis-related proteins by the western blot assay. As a result, AJE suppressed the expression of tyrosinase related protein 1 (TRP-1) and microphthalmia associated transcription factor (MITF). Moreover, AJE increased the expression of phosphorylated extracellular signal-regulated kinase (p-ERK). These results conclude that ERK activation by AJE reduces melanin synthesis via MITF downregulation and is subsequent to the inhibition of TRP-1 expression. Therefore, we suggest that AJE could be used as active ingredients for skin whitening.

• Journal of Ginseng Research
• /
• v.17 no.1
• /
• pp.52-60
• /
• 1993

Panax ginseng has been extensively used in the traditional oriental medicine as a restorative, tonic and Prophylactic agent. Recently, several reports regarding to anticancer effects of Panax ginseng has accumulated. These studies emphasized the fact that the anticancer activities might be due to a glycoside group called ginsenoside or pan.u saponin which has a water soluble characteristic. However, the authors and collaborates demonstrated that a highly lipid soluble component in extract of Panax ginseng roots contains a considerable cytotoxic activities against marine leukemic cells (L1210, P388) and human censer cells (HRT-18, HT-29, HCT48). This study was devised to observe the cytotoxic activities of Petroleum-ether extract of Panax giuseng roots (crude GBD and its Partially Purified fraction from silicic acid column chromatography (7 : 3 GX) against sarcoma-180 (5-180) and Walker carcinosar- coma 256 (Walker 256) in vivo, and murine leukemic Lymphocytes (L1210) and human rectal cancer cells (HRT-18) and human colon cancer cells (HT-29 and HCT48) in vitro. Each cell-line was cultured in medium containing serial concentration of the crude GX or 7 : 3 GX in vitro. A highly lipid soluble compound in the extract of Panax ginseng root was cytocidal to murine leukemic cells and human colon and rectal cancer cells in vitro. In the meantime, ginseng saponin derivatives did not have cytotoxic effects at its corresponding concentration. The growth rates of the cancer cells in medium containing ginseng extracts were inhibited gradually to a significant degree roughly in proportion to the increase of the extract concentration. The cytotoxic activity of 7 : 3 GX was about 3 times more potent than that of crude GX, one unit of cytotoxic activity against L1210 cells being equivalent to 2.54 Ug and 058 Ug for the crude GX and 7 : 3 GX, respectively. The Ri value of the active compound on silica- gel thin layer chromatography with petroleum-ether/ethyl ether/acetic acid mixture (90 : 10 : 1, v/v/v) as a developing so lvent was 053. While, the Panaxydol and Panaxynol as active compounds were purified from Petroleum-ether extract of Panax ginseng root by Drs. Ahn and Kim, and author found out that the one unit of cytotoxic activity of the Panaxydol and Panaxynol against L1210 cells being equivalent to 056 Ug and 0.3918 respectively. The survival times of mice inoculated with S-180 cells were extended about 1.5 to 2 times by the 7 : 3 GX treatment compared with their control group. The significantly decreased hemoglobin values of rats after inoculation with Walker 256 were recovered to normal range by oral administration of the crude Gt The synthetic levels of protein, DNA and RNA in human colon and rectal cancer cells were significantly diminished by treatment with the crude GX, which can explain a part of the origin of its anticancer activity.

• Korean Journal of Food Science and Technology
• /
• v.10 no.1
• /
• pp.52-56
• /
• 1978

The mechanism of cooking rice was investigated using a japonica type rice variety, Akibare, of 50%, 70% and 90% polishing degrees. The hardness of rice cooked at various cooking temperatures ($90^{\circ}-120^{\circ}C$) was measured with a Texturometer. The cooking rate followed the equation of a first-order reaction. The reaction rate constants were in the increasing order of 50%, 70% and 90% polished rice. The temperature coefficient of the reaction rate constant at cooking temperatures of ($90^{\circ}-100^{\circ}C$) was about 2 in all rice samples. The activation energies of cooking at temperatures below $100^{\circ}C$ and above $100^{\circ}C$ were about 17,000 and 9,000 cal/mole, respectively. The polishing degrees and water soaking time of rice did not affect the activation energy of cooking; however, the lower polishing degrees and shorter soaking increased the cooking time The experimental results suggested that the cooking process of rice comprises two mechanisms: At temperatures below $100^{\circ}C$ the cooking rate is controlled by the reaction rate of rice constituents with water, and at temperatures above $100^{\circ}C$, it is controlled by the rate of diffusion of water through the cooked portion (or layer) toward the interface of uncooked core in which the reaction is occurring.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.125-132
• /
• 1988

Gulbis were made of raw Pseudosciaena manchurica by different salting methods and drying conditions. During the Gulbi processing, the contents of trimethylamine(TMA), dimethylamine(DMA) and formaldehyde(FA) were chemically analyzed and the distribution of fat was microscopically observed. The contents of TMA, DMA and FA in raw sample were 0.9mg, 3.19mg and 0.19mg per 100g, respectively. The TMA contents in Gulbi were rapidly increased to 24.82-76.32mg during drying, while the DMA contents in Gulbi were slowly increased and FA contents in Gulbi remained nearly unchanged. These changes were not influenced by the kinds of salt and salting methods. The formation rates of TMA and DMA were twice faster dried by the controlled condition than the natural condition. The fat in muscle moved to the skin layer through connective tissue with the laps of drying time. The extent of fat shifting was smaller salted by purified salt than by bay salt. The muscle tissue of Gulbi dried by the controlled condition had clearer spaces between white muscles than that of the natural condition. The muscle tissue of Gulbi salted with purified salt exsisted orderly, while the sample salted with bay salt was clumped.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.157-168
• /
• 2014

From a complex systems perspective, ecohydrological systems in forests may be characterized with (1) large networks of components which give rise to complex collective behaviors, (2) sophisticated information processing, and (3) adaptation through self-organization and learning processes. In order to demonstrate such characteristics, we applied the recently proposed 'process networks' approach to a temperate deciduous forest in Gwangneung National Arboretum in Korea. The process network analysis clearly delineated the forest ecohydrological systems as the hierarchical networks of information flows and feedback loops with various time scales among different variables. Several subsystems were identified such as synoptic subsystem (SS), atmospheric boundary layer subsystem (ABLS), biophysical subsystem (BPS), and biophysicochemical subsystem (BPCS). These subsystems were assembled/disassembled through the couplings/decouplings of feedback loops to form/deform newly aggregated subsystems (e.g., regional subsystem) - an evidence for self-organizing processes of a complex system. Our results imply that, despite natural and human disturbances, ecosystems grow and develop through self-organization while maintaining dynamic equilibrium, thereby continuously adapting to environmental changes. Ecosystem integrity is preserved when the system's self-organizing processes are preserved, something that happens naturally if we maintain the context for self-organization. From this perspective, the process networks approach makes sense.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.203-209
• /
• 1998

The cutting oil emulsion microfiltration was carried out on dead-end call and crossflow systems equipped with 0.22 $\mu$m GVHP Millipore and 0.2 m stainless steel Mott microfiltration membranes, respectivdy. The oil drop size in the emulsion was varied from 0.07 to 0.22 $\mu$m. Cake filtration(CFM) and standard pore blocking models(SPBM) were applied to predict the permeation flux. The permeation fluxes of 0.01 vol% oil emulsion followed CFM for dead-end system very well under the condition of 400 rpm and below 100 kPa. The SPBM was, however, suitable for the permeation flux at 400 rpm and above 150 kPa. The oil layer on the membrane surface was destroyed and reproduced repeatedly as operating pressure was suddenly changed from 60 to 200 kPa, and then returned to 60 kPa. Also, we estimated the critical entry pressure(CEP) which is changed from CFM to SPBM, and CEP for dead-end system was around 100 kPa. The CEP increased from around 100 to 150 kPa for the crossflow system as the oil concentration increased from 0.01 to 0.03 vol% when Reynolds number was 7080.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.23-33
• /
• 2017

Due to the rapid development of cities, densities and heights of urban structures are increased, and much larger and more underground spaces are being developed accordingly. Increasing development of underground spaces has induced more ground sinks and underground cavities. Therefore, safety of people is threatened by potential ground collapses and possible accidents, which may result from underground cavity. To actively respond against potential danger of ground sink, evaluation of existing cavity grade and development of recovery procedure are important. There exists the ground sinking management grade system of expressway developed as local standards in Japan. Recently, ground sinking management grade system of Seoul was developed with consideration of road and asphalt conditions. In this study, 209 underground cavities of ${\bigcirc}{\bigcirc}$ area were explored and their cavity shapes and grades were evaluated based on both ground sinking management grade systems of Japan and Seoul. Comparison is made between cavity grades evaluated based on both grading systems from Japan and Seoul. As a result of comparative analysis, the conservatively-estimated cavity grades requiring emergency restoration based on the Japanese management grade system of expressway result from neglection of layer thickness of surface pavement, considering only width and cover depth of a cavity.