• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.43-46
• /
• 2008

In Top-Down construction for underground structures, the placement of slab as a horizontal supporting member against lateral earth pressure is an important process in determining construction time and cost. Usually, a reinforced concrete perimeter girder distributes concentrated lateral loads from earth retaining structures such as Cast-in-place (CIP) piles. By combining the function of the R/C perimeter girder and horizontal slabs, the Opened Slab Method is efficient for reducing construction time by elimination of time-consuming formwork for traditional perimeter girders. The structural performance of the method is also discussed in this paper.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.42-46
• /
• 2004

Aneurysm embolization method using coils has been widely used. When partial blocking of an aneurysm is inevitable, the locations of coils are important since they change the flow patterns inside the aneurysm, which affect the embolization process. We calculated the flow fields inside the partially blocked lateral aneurysm models for different coil locations-proximal neck, distal neck, proximal dome and distal dome. Flow into the aneurysm sac was significantly reduced in the distally blocked models, and coils at the distal neck blocked inflow more effectively comparing to those at the distal dome. This study suggests that the distal neck should be the most effective location for aneurysm embolization.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.168-175
• /
• 1992

Ion beam mixing과 질소분위기에서 Rapid Thermal Annealing을 이용하여 형성된 TiSi2 박막의 표면과 계면의 물리적, 전기적 특성이 크게 개선되었으며, 기존 Ti-SALICIDE 의 신뢰도 측면에서 문제가 될 수 있는 Oxide Spacer 상에서의 Lateral Silicide 형성이 최 대한 억제된 수 있었다. 또한 Ti-SALICIDE 공정에서의 Ti/Si와 Ti/SiO2의 Interaction을 반응 조건별로 연구하였다.

• Structural Engineering and Mechanics
• /
• 제9권6호
• /
• pp.541-555
• /
• 2000

Pultruded cross-sections are always thin-walled due to constraints in the manufacturing process. Thus, the buckling strength determines the overall strength of the member. The elastic buckling of pultruded angle sections subjected to direct compression is studied. The lateral-torsional buckling, very likely to appear in thin-walled cross-sections, is investigated. Plate theory is used to allow for cross-sectional distortion. Shear effects and bending-twisting coupling are accounted for in the analysis because of their significant role. A simplified approach for determining the maximum load of equal leg angle sections under compression is presented. The analytical results obtained in this study are compared to the manufacturer's design guidelines for compression members as well as with the design specifications for steel structural members. Experimental results are obtained for various length specimens of pultruded angle sections. The results presented in this paper correspond to actual pultruded equal leg angle sections being used in civil engineering structures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.113-118
• /
• 2009

It is of utmost important that track loads at rail induced by running train was usually obtained for track performance evaluation. A reaction force of track was measured wheel loads and lateral force by strain gauges on the rail, and then it was obtained to derailment coefficient and variational ratio of wheel load from its relationship. In this study, a existing monitoring system methods with many manpower working were reviewed about measurements, process of testing, and how to obtain accurately measured data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.592-597
• /
• 2003

To solve a problem of micro drive due to small size and portability, it is necessary to understand and to investigate micro drive widely ,deeply. So, we performed modal analysis of suspension of micro drive, and load/unload experiment for Input current to VCM coil and disk speed. To determine the effect of ramp profile, curve fitting of lateral speed is performed with equation of speed. The results indicate that small load/unload speeds decrease the number of head/disk contacts, and during unloading process, low disk speed increase the number of head/disk contacts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.621-622
• /
• 2006

This paper presents the design of LVDS(Low-Voltage-Differential-Signaling) driver circuit for Gb/s-per-pin operation using BiCMOS process technology. To reduce chip area, LVDS driver's switching devices were replaced with lateral bipolar devices. The designed lateral bipolar transister's common emitter current gain($\beta$) is 20 and device's emitter size is 2*10um. Also the proposed LVDS driver is operated at 2.5V and the maximum data rate is 2.8Gb/s approximately.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.227-231
• /
• 2008

A latchup-free design based on the lateral diffused MOS (LDMOS) adopting the "Darlington" approaches was designed. The use of Darlington configuration as the trigger circuit results in the reduction of the size of the circuit when compared to the conventional inverter driven RC-triggered MOSFET ESD power clamp circuits. The proposed clamp was fabricated using a $0.35{\mu}m$ 60V BCD (Bipolar CMOS DMOS) process and the performance of the proposed clamp was successfully verified by TLP (Transmission Line Pulsing) measurements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.492-499
• /
• 1997

Experimental research was conducted to investigate structural performance of concrete columns confined with welded reinforcement grids were tested under simulated seismic loading. The columns were subjected to constant axial compression accompanied by incrementally increasing lateral deformation reversals. The results indicate thar welded reinforcement grid can be used effectively as confinement reinforcement provided that the steel used, have sufficient ductility and the welding process employed does not alter the strength and elongation characteristics of steel. The grids improved the structural performance of columns, which developed lateral drift ratios in excess of 3% with the spacing and volumetric ratio of transverse reinforcement similar to those required by the ACI 318-95 Building Code.

• Animal cells and systems
• /
• 제14권4호
• /
• pp.323-331
• /
• 2010

Ovigerous crabs of Erimacrus isenbeckii were collected from the northeastern coast of South Korea and their larvae were reared in the laboratory. Two zoeal stages were described and illustrated in detail. The first zoeal characteristics between the present material and Sasaki and Mihara's (1993: J Crust Biol. 13:511 522) were different especially in the setations of the endopods of the maxillipeds. The zoea of Erimacrus isenbeckii strongly resembled those of two Telmessus species in the Cheiragonidae, but the former could be distinguished from the latter by having spinulate carapace spines, a lateral process on the abdominal somite 3, and longer lateral spines on the telson fork.