• Wind and Structures
• /
• 제32권5호
• /
• pp.509-520
• /
• 2021

The streamlined box is a common type of girders for long-span suspension bridges. Spanning deep canyons, long-span bridges are frequently attacked by strong winds with large angles of attack. In this situation, the flow field around the streamlined box changes significantly, leading to reduction of the flutter performance. The wind fairings have different effects on the flutter performance. Therefore, this study examines the flutter performance of box girders with different wind fairings at large angles of attack. Computational fluid dynamics (CFD) simulations were carried out to extract the flutter derivatives, and the critical flutter state of a long-span bridge was determined. Further comparisons of the wind fairings were investigated by a rapid method which is related to the input energy by the aerodynamic force. The results show that a reasonable type of wind fairings could improve the flutter performance of long-span bridges at large angles of attack. For the torsional flutter instability, the wind fairings weaken the adverse effect of the vortex attaching to the girder, and a sharper one could achieve a better result. According to the input energies on the girder with different wind fairings, the symmetrical wind fairings are more beneficial to the flutter performance

• 한국건축시공학회지
• /
• 제10권3호
• /
• pp.129-136
• /
• 2010

지붕 개폐형태의 대공간 막 구조물은 멀티미디어적인 요소 및 전천후 공간을 활용할 수 있지만, 다수의 연결 조인트에 의해 구조물이 형성되므로 누수에 취약한 문제점이 있다. 특히 개폐식 지붕 맞댐부위의 우수차단 시스템은 우수의 직접적인 유입을 차단하는 역할을 하고 있으므로 바람을 동반한 강우환경에서도 수밀성능이 요구된다. 따라서 상기의 환경 조건을 부여한 수밀성 실험을 통하여 우수차단 시스템의 디테일에 대한 수밀성능을 평가하고자 한다. 실험 결과, 모든 실험체에서 누수가 발생하였으며, 우수의 유입경로는 동일한 것으로 확인되었다. 특히, 바람에 의하여 물입자들이 구조물 내부로 들이치는 현상이 주원인이므로 이를 보완한 새로운 우수차단 시스템의 디테일이 요구된다. 이 연구를 통해 강우 환경과 바람 환경을 동시에 부여하였을 때 발생될 수 있는 우수 침입 경로를 확인하였으며, 수밀 성능 확보 유무가 사전에 검토되어 져야함을 알 수 있었다. 또한, 디테일을 사전에 작성하여 모형 수밀성 시험을 반드시 시행한 후 그 결과에 따라 설계 디테일의 변경, 개선, 보완시공을 하여야 할 것이다.

• Journal of Ecology and Environment
• /
• 제31권3호
• /
• pp.207-211
• /
• 2008

We investigated the leaf demography of a temperate woody liana, Akebia trifoliata, in a temperate forest in Japan, Akebia is semi-evergreen: some leaves are shed before winter, while others remain through the winter. Previous studies of semi-evergreen species found that variation in leaf life span was caused by variation in the timing of leaf emergence, Leaves that appeared just before winter over-wintered, while leaves appearing earlier were shed, However, it is unclear whether leaves of the same cohort (i.e., leaves that appear at the same time within a single site) show variation in life span under the effect of strong seasonality. To separate variation in life span among the leaves in each cohort from variation among cohorts, we propose a new method - the single leaf diagram, which shows the emergence and death of each leaf. Using single leaf diagrams, our study revealed that Akebia leaves within a cohort showed substantial variation in life span, with some over-wintering and some not. In addition, leaves on small ramets in the understory showed great variation in life span, while leaves on large ramets, which typically reach higher positions in the forest canopy, have shorter lives, As a result, small ramets were semi-evergreen, whereas large ramets were deciduous, The longer lives of leaves on small ramets can be interpreted as a shade-adaptive strategy in understory plants.

• 교육녹색환경연구
• /
• 제9권1호
• /
• pp.32-40
• /
• 2010

The purpose of this study was to evaluate structural safety and economic efficiency of prestressed hybrid beam using T-shape steel member which was developed to build large span educational facilities. Hybrid beam specimens were manufactured with 16.0m long and load was uniformly distributed by 12.0kN steel hexahedrons. In this study, honeycomb beam design process was introduced to T-shape section steel beam design. Vibration condition of specimens were analyzed by Korea Building Code 2009 and AISC Steel Design Guide Series-11. As a result, the prestressed hybrid beam with T-shape steel member has about 10.4% of cost reduction effect.

• 교육녹색환경연구
• /
• 제9권3호
• /
• pp.34-40
• /
• 2010

In this study, vibration characteristics of reinforced concrete slab in large span educational facilities were evaluated. A 21.75m X 14.4m full scale reinforced concrete slab specimen was constructed with pre-flex hybrid beams. Vibrations were generated by three different methods such as free falling method of a 6kg sand bag, a 70kg person walking method and impact method by impulse hammer. Vibrations were generated more than 3 times at single location. Vibration characteristic data were collected by SA390 signal analyzer machine at 5 different locations.

• 한국공간구조학회논문집
• /
• 제24권2호
• /
• pp.31-41
• /
• 2024

This study aims to investigate the seismic response of a large span thin shell structures and assess their displacement under seismic loads. The study employs finite element analysis to model a thin shell structure subjected to seismic excitation. The analysis includes eigenvalue analysis and time history analysis to evaluate the natural frequencies and displacement response of the structure under seismic loads. The findings show that the seismic response of the large span thin shell structure is highly dependent on the frequency content of the seismic excitation. The eigenvalue analysis reveals that the tenth mode of vibration of the structure corresponds to a large-span mode. The time history analysis further demonstrates, with 5% damping, that the displacement response of the structure at the critical node number 4920 increases with increasing seismic intensity, reaching a maximum displacement of 49.87mm at 3.615 seconds. Nevertheless, the maximum displacement is well below the allowable limit of the thin shell. The results of this study provide insight into the behaviour of complex large span thin shell structures as elevated foundations for buildings under seismic excitation, based on the displacement contours on different modes of eigenvalues. The findings suggest that the displacement response of the structure is significant for this new application of thin shell, and it is recommended to enhance the critical displacement area in the next design phase to align with the findings of this study to resist the seismic impact.

• Structural Engineering and Mechanics
• /
• 제88권4호
• /
• pp.379-387
• /
• 2023

Wind and earthquake loads may cause strong vibrations in large-span cable-stayed bridges, leading to the inability of the bridge to operate normally. An improved Pounding Tuned Mass Damper (PTMD) system was designed to improve the safety of the large-span cable-stayed bridge. The vibration control effect of the improved PTMD system on the large-span cablestayed bridge under the combined action of earthquake-wind-traffic was studied. Furthermore, the impact of different parameters on the vibration suppression performance of the improved PTMD system was analyzed. The numerical results indicate that the PTMD system is very effective in suppressing the displacements of the bridge caused by both the traffic-wind coupling and traffic-earthquake coupling. Moreover, the number, mass ratio, pounding stiffness, and gap values have a significant influence on the vibration suppression performance of the improved PTMD system. When the number of PTMD is increased from 3 to 9, the vibration reduction ratio of the vertical displacement is increased from 25.39% to 48.05%. As the mass ratio changes from 0.5% to 2%, the vibration reduction ratio increases significantly from 22.23% to 53.30%.

• 한국공간구조학회논문집
• /
• 제22권3호
• /
• pp.15-24
• /
• 2022

In this research, the case of modern wooden structures since 1950 with span of 30m or more was investigated and analyzed the construction status and structural planning characteristics of wooden large space architecture. As a result, wooden large space buildings have built around Asia, North America, and Europe, in which cases of ice skating stadiums with span of 30m to 60m were concentrated. In the case of baseball parks and football stadiums, even a span of about 165m was built in a wooden structure. In addition, it was found that the structural systems used in wooden large space structures were a funicular arch and truss structure, in that cases, funicular arch system consisting of radial arrangements was used in the examples exceeded 150m and the two way truss system was also used in long span wooden structures exceeding 100m. As the truss structure with a tie-rod or the flexure+tension structure was partially investigated, it can be seen that various timber structural systems need to be devised and researched. Also, It was investigated that a technique in which some members of the truss are made of steel or a composite member of steel and timber is also possible to develop

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.277-290
• /
• 2016

This paper investigates the ground vibration induced by high-speed trains moving on multi-span continuous bridges. The dynamic impact factor of multi-span continuous bridges under trainloads was first determined in the parametric study, which shows that the dynamic impact factor will be large when the first bridge vertical natural frequency is equal to the trainload dominant frequencies, nV/D, where n is a positive integer, V is the train speed, and D is the train carriage interval. In addition, more continuous spans will produce smaller dynamic impact factors at this resonance condition. Based on the results of three-dimensional finite element analyses using the soil-structure interaction for realistic high-speed railway bridges, we suggest that the bridge span be set at 1.4 to 1.5 times the carriage interval for simply supported bridges. If not, the use of four or more-than-four-span continuous bridges is suggested to reduce the train-induced vibration. This study also indicates that the vibration in the train is major generated from the rail irregularities and that from the bridge deformation is not dominant.

• Wind and Structures
• /
• 제13권1호
• /
• pp.57-82
• /
• 2010

The 486m-long roof of Shenzhen Citizens Centre is one of the world's longest spatial lattice roof structures. A comprehensive numerical study of wind effects on the long-span structure is presented in this paper. The discretizing and synthesizing of random flow generation technique (DSRFG) recently proposed by two of the authors (Huang and Li 2008) was adopted to produce a spatially correlated turbulent inflow field for the simulation study. The distributions and characteristics of wind loads on the roof were numerically evaluated by Computational Fluid Dynamics (CFD) methods, in which Large Eddy Simulation (LES) and Reynolds Averaged Navier-Stokes Equations (RANS) Model were employed. The main objective of this study is to explore a useful approach for estimations of wind effects on complex curved roof by CFD techniques. In parallel with the numerical investigation, simultaneous pressure measurements on the entire roof were made in a boundary layer wind tunnel to determine mean, fluctuating and peak pressure coefficient distributions, and spectra, spatial correlation coefficients and probability characteristics of pressure fluctuations. Numerical results were then compared with these experimentally determined data for validating the numerical methods. The comparative study demonstrated that the LES integrated with the DSRFG technique could provide satisfactory prediction of wind effects on the long-span roof with complex shape, especially on separation zones along leading eaves where the worst negative wind-induced pressures commonly occur. The recommended LES and inflow turbulence generation technique as well as associated numerical treatments are useful for structural engineers to assess wind effects on a long-span roof at its design stage.