• ETRI Journal
• /
• 제39권1호
• /
• pp.69-75
• /
• 2017

This study presents a dual-band 3D frequency selective surface that provides a large degree of freedom in frequency and bandwidth adjustability. The proposed structure is evaluated in terms of its structural parameters, and prototypes are fabricated. The radius of the copper rings and the height of the cylinders are considered, and are shown through full-wave electromagnetic simulations to have a significant effect on the frequency characteristics of the frequency selective surface. The measurement results of the fabricated samples are compared with the simulation results, and a satisfactory agreement is obtained.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.231-237
• /
• 2015

The pin-gear drive is a special form of fixed-axle gear mechanism. A large wheel with cylindrical pin teeth is called a pinwheel. As pinwheels are rounded, they have a simple structure, easy processing, low cost, and easy overhaul compared with general gears. They are also suitable for low-speed, heavy-duty mechanical transmission and for occasions with more dust, poor lubrication, etc. This paper introduces a novel slewing ring bearing with an external pinwheel gear set (e-PGS). First, we consider the exact cam pinion profile of the e-PGS with the introduction of a profile shift. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of the e-PGS can be lowered significantly by increasing the profile shift coefficient.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.158-161
• /
• 2000

Generally superconducting generators(S. G.'s) will be classified into 2 types according to their field coil shape. The first one is race-trace type and the other is saddle type. Race-track type S.G.'s have almost the same structure with conventional salient pole generators which are being used as largely small scale machines with more than 4 poles. On the other hand saddle type S.G.'s correspond to conventional cylindrical generators with 2 poles used for large turbines in power plants. In this paper 1MVA S.G. with saddle type field coil is electromagnetically designed and based on the research results from development of 30kVA S.G. with race-track type field oils in our group. other parts such as cooling systems and power leads are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.515-518
• /
• 1994

Holographic interferometry is a useful whole-field nondestructive testing for measuring deformations and vibrations of engineering structure. A diverging beam is used as a light source int the most of holographic interferometer practically. For a relatively small object the optical arrangement using a collimated light source has no difficulty in use technically, but for a large object it is difficult to use a collimated beam. In this study we calculate the error of measured displacement from the sensitivity vector dominated by the geometry of optical arrangement for holographic interferometer and show the result obtained with 2-D plots. A Plane surface and a cylindrical surface were chosen as objects to be calculated and computer analysis was carried out for the cases of a diverging beam and a collimated one.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.118-125
• /
• 2008

Single walled carbon nanotubes (SWCNTs) can be modified to produce a new concept of hybrid materials by introducing atoms or molecules inside their cylindrical empty space. Such an endohedral doping of the SWCNTs is expected to decisively alter their electronic transport and mechanical properties, In this study, we purified SWCNTs by three-step purification processes and formed the peapod structure by introducing $C_{60}$ fullerenes inside the SWCNTs. $C_{60}$ molecules were observed to be regularly arranged by transmission electron microscopy. In Raman spectra, the radial breathing mode (RBM) rather than the other modes was significantly affected by the endohedral injection of $C_{60}$. The RBM intensity was more greatly reduced in the large-diameter SWCNTs than the small-diameter ones, Raman spectroscopy is expected to be a key technique for analyzing $C_{60}$-encapsulated SWCNTs.

• 대한토목학회논문집
• /
• 제30권2C호
• /
• pp.109-117
• /
• 2010

해저지반 내에 매장된 가스하이드레이트가 해리될 경우 많은 양의 가스와 물이 발생한다. 이렇게 발생한 가스와 물이 장기간에 걸쳐 외부로 빠져나가거나 주변 지반으로 이동할 경우 토체 안에는 크고 작은 공극이 형성될 수 있다. 그리고 지속적인 강우나 폭우로 인하여 지반 내의 조립질 흙 사이의 세립분이 유실되거나 고결성 지반 내의 일부 고결이 끊어지면서 골격 내에 빈 공간이 형성될 수 있다. 본 연구에서는 가스하이드레이트의 해리로 형성되거나 또는 유수작용으로 인하여 지반 내의 일부 재료가 유실되거나 용해되어 형성된 비교적 큰 공극이 지반의 강도에 미치는 영향을 연구하였다. 가스하이드 레이트를 포함한 토체나 유실성 지반의 골격을 시뮬레이션하기 위하여 입도가 균등한 글라스비즈를 사용하였다. 글라스비즈를 2%의 시멘트비와 7%의 함수비로 혼합하여 몰드 안에 5층으로 나누어 다져 원기둥 모양의 공시체를 만들었다. 흙입자에 비하여 상대적으로 큰 공극은 의약품에 일반적으로 사용되는 빈 캡슐을 넣어 형성하였다. 캡슐을 각층 높이의 중앙부분에 넣고 다음 층을 쌓아 다지는 방식으로 완성하였으며, 캡슐의 개수와 방향, 그리고 캡슐의 길이를 달리하면서 다양한 공시체를 제작하여 2일 동안 양생시킨 다음 일축압축시험을 실시하였다. 공시체 내에 형성된 공극(캡슐)의 체적(개수)과 방향 그리고 공극의 길이에 따라 공시체의 일축압축강도는 차이를 보였으며, 공시체 내에서 공극이 차지하는 체적과 단면적이 강도에 중요한 영향을 미쳤다. 공시체 내에 형성된 큰 공극으로 일축압축강도는 공극이 없는 공시체 강도의 최대 35%까지 감소하였다. 이와 같은 연구 결과는 가스하이드레이트 해리 후 지반의 장기적인 강도 변화와 지반 내의 세립분의 유실로 인한 강도 감소를 예측하는데 사용될 수 있다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.7-16
• /
• 1999

The aim of this research was to evaluate the influences of coating components and structures on ink absorbency. The ink absorbency was measured as porosity, K&N ink absorption, gloss and ink set-off. In order to obtain the relationship between the coating structure and the ink absorbency, the binder level was adjusted and two types of pigments were examined. One of the pigments was known to make the porous coating structure and the other one had strong ink affinity. The effects of coating components were studied by applying six different types of latex and various additives . In this research, CLC(cylindrical laboratory coater) and Prufbau printability tester were used. It was found that the decreasing latex dosage and introducing porous pigment were effective solutions to increase ink absorbency. However, the ink absorbency could not be improved by applying the fine pigment even though it had strong ink affinity. Among the characters of the latex, particle size and surface tension were found to have the strong effect on ink absorbency. The ink absorbency increased with large particle size and low surface tension latex. The additives were varied and it was found that applying to the top coating was effective.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.128-132
• /
• 2017

Harmonic structure materials are materials with a core-shell structure having a shell with a small grain size and a core with a relatively large grain size. They are in the spotlight because their mechanical properties reportedly feature strength similar to that of a sintered powder with a fine grain size and elongation similar to that of a sintered powder with a coarse grain size at the same time. In this study, the tensile properties, microstructure, and stretch-flangeability of harmonic structure SUS304L made using powder metallurgy are investigated to check its suitability for automotive applications. The harmonic powders are made by mechanical milling and sintered using a spark plasma sintering method at 1173 K and a pressure of 50 MPa in a cylindrical die. The sintered powders of SUS304L having harmonic structure (harmonic SUS304L) exhibit excellent tensile properties compared with sintered powders of SUS304L having homogeneous microstructure. In addition, the harmonic SUS304L has excellent stretch-flangeability compared with commercial advanced high-strength steels (AHSSs) at a similar strength grade. Thus, the harmonic SUS304L is more suitable for automotive applications than conventional AHSSs because it exhibits both excellent tensile properties and stretch-flangeability.

• 한국입자에어로졸학회지
• /
• 제17권4호
• /
• pp.81-89
• /
• 2021

Understanding particle-laden flow around cylindrical bodies is essential for the better design of various applications such as filters. In this study, laminar flows around two tandem cylinders and the motions of particles in the flow are numerically investigated at low Reynolds numbers. We aim to reveal the effects of the spacing between cylinders, Reynolds number and particle Stokes number on the characteristics of particle trajectories. When the cylinders are placed close, the unsteady flow inside the inter-cylinder gap at Re = 100 shows a considerable modification. However, the steady recirculation flow in the wake at Re = 10 and 40 shows an insignificant change. The change in the flow structure leads to the variation of particle dispersion pattern, particularly of small Stokes number particles. However, the dispersion of particles with a large Stokes number is hardly affected by the flow structure. As a result, few particles are observed in the cylinder gap regardless of the cylinder spacing and the Reynolds number. The deposition efficiency of the upstream cylinder shows no difference from that of a single cylinder, increasing as the Stokes number increases. However, the deposition on the downstream cylinder is found only at Re = 100 with large spacing. At this time, the deposition efficiency is generally small compared to that of an upstream cylinder, and the deposition location is also changed with no deposited particles near the stagnation point.

• 한국추진공학회지
• /
• 제22권2호
• /
• pp.66-73
• /
• 2018

밀폐용기 내 Zirconium/Potassium Perchlorate의 연소를 수치적 모델링을 통해 전산해석을 수행하였다. 5차 WENO 공간차분법과 improved delayed detached eddy (IDDES) 난류모델을 사용하여 충격파가 동반되는 내부 유동구조를 모사하였고, 라그랑지안 연소모델을 통해 화약 입자를 계산하였다. 옆면 중앙에 센서가 설치된 원통형 밀폐용기 내부 유동분석을 통해 압력 진동이 발생하는 원인을 규명하였다. 또한 센서 다이어프램 깊이 변화에 따라 측정되는 압력 데이터를 실험값과 비교분석 하였다. 그 결과 센서 탭의 깊이가 약 2.36 mm 이상으로 커지면 유동속도가 아음속으로 감쇠하고 복잡한 eddy가 발생하여 측정값에 큰 불규칙성을 야기하는 현상을 관측하였다.