ETRI Journal

Electronics and Telecommunications Research Institute (한국전자통신연구원)
권호 표지
DOI QR코드

DOI QR Code

Dual-Band Double-Cylindrical-Ring 3D Frequency Selective Surface

  • Can, Sultan (Department of Electrical and Electronics Engineering, Ankara University) ;
  • Karakaya, Emrullah (Department of Engineering Physics, Ankara University) ;
  • Bagci, Fulya (Department of Engineering Physics, Ankara University) ;
  • Yilmaz, Asim Egemen (Department of Electrical and Electronics Engineering, Ankara University) ;
  • Akaoglu, Baris (Department of Engineering Physics, Ankara University)
  • Received : 2015.10.18
  • Accepted : 2016.09.19
  • Published : 2017.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents a dual-band 3D frequency selective surface that provides a large degree of freedom in frequency and bandwidth adjustability. The proposed structure is evaluated in terms of its structural parameters, and prototypes are fabricated. The radius of the copper rings and the height of the cylinders are considered, and are shown through full-wave electromagnetic simulations to have a significant effect on the frequency characteristics of the frequency selective surface. The measurement results of the fabricated samples are compared with the simulation results, and a satisfactory agreement is obtained.

Keywords

References

  1. B.A. Munk, Frequency Selective Surface: Theory and Design, New York, USA: Wiley-Interscience, 2000.
  2. S.N. Azemi and W.S.T. Rowe, "Development and Analysis of 3D Frequency Selective Surfaces," Asia-Pacific Microw. Conf. Proc., Victoria, Australia, Dec. 5-8, 2011, pp. 693-696.
  3. S.N. Azemi, K. Ghorbani, and W.S.T. Rowe, "3D Frequency Selective Surfaces," Progress Electromagn. Res. C, vol. 29, 2012, pp. 191-203. https://doi.org/10.2528/PIERC12033006
  4. A.K. Rashid and Z. Shen, "Three-Dimensional Frequency Selective Surfaces," Int. Conf. Commun. Circuits, Syst., Chengdu, China, July 28-30, 2010, pp. 688-691.
  5. E.A. Parker, S.M.A. Hamdy, and R.J. Langley, "Arrays of Concentric Rings as Frequency Selective Surfaces," Electron. Lett., vol. 17, no. 23, Nov. 1981, pp. 880-881. https://doi.org/10.1049/el:19810614
  6. J. Huang, T.K. Wu, and S.W. Lee, "Tri-Band Frequency Selective Surface with Circular Ring Elements," IEEE Trans. Antennas Propag., vol. 42, no. 2, Feb. 1994, pp. 166-175. https://doi.org/10.1109/8.277210
  7. S. Uckun and T. Ege, "Three Concentric Rings as Frequency Selective Surfaces on Isotropic Chiral Slabs," J. Optoelectron. Adv. Mater., vol. 8, 2006, pp. 345-349.
  8. F. Bagci et al., "Parametric Analysis of Different Radii of Concentric Rings and Substrates in Frequency Selective Surfaces," Int. Symp. Fundam. Electric. Eng., Bucharest, Romania, Nov. 28-29, 2014, pp. 1-5.
  9. M.H.B. Ucar, A. Sondas, and Y.E. Erdemli, "Switchable Split-Ring Frequency Selective Surfaces," Progress Electromagn. Res. B, vol. 6, 2008, pp. 65-79. https://doi.org/10.2528/PIERB08031214
  10. L. Bao-Qin et al., "Design of a Tunable Frequency Selective Surface Absorber as a Loaded Receiving Antenna Array," Chinese Physics B, vol. 23, no. 2, 2013, pp. 024201-1-024201-5. https://doi.org/10.1088/1674-1056/23/2/024201

Cited by

  1. Optimization and realization of symmetric multilayer cascaded FSSs structure with excellent Butterworth response at large angle incidence vol.123, pp.5, 2017, https://doi.org/10.1007/s00339-017-1002-6
  2. Design of assembly‐type frequency selective surface structure using Lego‐type blocks vol.64, pp.2, 2017, https://doi.org/10.1002/mop.33104