• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.158-163
• /
• 2013

Cross laminated timber (CLT) has been an rising issue as a promising building material replacing steel-concrete in mid story rise construction. But, there was no specific standard for CLT because it had been developed in industrial section. Recently, new draft for requirements of CLT was proposed by EN which suggested to evaluate the performance of adhesive in CLT by the same method as glulam. But, it has been reported that shear performance of cross laminated timber is governed by rolling shear. Therefore, block shear tests were carried out to compare parallel to grain laminating and cross laminating using commercial one component PUR (Poly urethane resin). The result showed that the current glulam standard for evaluating bonding performance is not appropriate for CLT. Beacause shear strength of cross laminating decreased to 1/3 of parallel to grain laminating and this strength was representing shear performance of wood itself not the bond. However, cross laminating showed no significant effect on wood failure. Thus, wood failure can be used as a requirement of CLT bonding. Based on the results, cross laminating effect should be included when evaluating adhesive performance of CLT correctly and should be considered as an important factor.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.419-430
• /
• 2023

In this study, the floor impact sound insulation performance of Korean domestic Cross-Laminated Timber (CLT) slabs was evaluated according to their joint types, species and thicknesses in laboratory experiments. The sound insulation performance of the CLT has not been investigated before, thus, this study was conducted to quantify basic data on floor impact sound insulation performance of CLT slabs. 5-ply and 150 mm thick CLT panels made of 2 species, Larix kaempferi and Pinus densiflora, were used for the study. The CLT panels were assembled by 3 types of inter-panel joints to form floor slabs: spline, butt and half-lap. And the 150 mm thick Larix CLT slabs were stacked to the thicknesses of 300 mm and 450 mm. The heavy-weight floor impact sound insulation performance of the 150 mm CLT slabs were evaluated to be 70 dB for the Larix slabs and 71.6 dB for the Pinus slabs, and the light-weight floor impact sound insulation performance, 78.3 dB and 79.6 dB, respectively. No significant difference in the sound insulation performance was found between the slabs of the 2 species or among the 3 types of joints. The reduction of 1 dB in the heavy-weight floor impact sound and 1.6 dB in the light-weight floor impact sound per 30 mm increase in thickness were confirmed through the experiments. This study can be viewed as the basic research for the evaluation of floor impact sound insulation performance of CLT.

• Journal of the Korean Wood Science and Technology
• /
• 제51권4호
• /
• pp.239-252
• /
• 2023

In this study, bending and compression strength tests were performed to investigate effect of composition of layer layout of Larix cross-laminated timber (CLT) on mechanical properties. The Larix CLT consists of five laminae, and specimens were classified into four types according to grade and composition of layer. The layer's layout were composited as follows 1) cross-laminating layers in major and minor direction (Type A), and 2) cross-laminating external layer in major direction and internal layer applied grade of layer in minor direction (Type B). E12 and E16 were used as grades of lamina for major direction layer of Type A and external layer of Type B according to KS F 3020. In results of the bending test of CLT using same grade layer according to layer composition, the modulus of elasticity (MOE) of Type B was higher than Type A. In case of prediction of bending MOE of Larix CLT, the experimental MOE was higher than 1.00 to 1.09 times for Shear analogy method and 1.14 to 1.25 times for Gamma method. Therefore, it is recommended to predict the bending MOE for Larix CLT by shear analogy method. Compression strength of CLT in accordance with layer composition was measured to be 2% and 9% higher for Type A using E12 and E16 layers than Type B, respectively. In failure mode of Type A, progress direction of failure generated under compression load was confirmed to transfer from major layer to minor layer by rolling shear or bonding line failure due to the middle lamina in major direction.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.58-69
• /
• 2024

To evaluate the adhesive characteristics of mixed cross-laminated timber (CLT) using domestic softwoods structural lumber proposed by KS F 3020 and yellow poplar, penetration depth of adhesive and thickness of bonding line were analyzed based on the results of boiling water soaking delamination. 3 Types of adhesives and 2 types of major layer were divided into a 5 ply CLT using yellow popular as minor layer. The bonding performance of the mixed CLT as structural members was evaluated based on the KS F 2081. The thickness of bonding line between layers of the mixed CLT was measured with a scanning electron microscope, and the adhesive penetration depth in the layer members was measured with an optical microscope. As a result of boiling water soaking delamination test of mixed CLT, the CLT specimens using PRF and PUR adhesives met the requirements of KS F 2081. It was verified that the penetration path of the adhesive in the layes was mainly through the tracheid cell in the case of Japanese larch and Korean red pine layers, and through the vessel and radial tissue in yellow popular layers. The penetration depth of the adhesive was the highest for the PRF adhesive under the same pressing time conditions, and the thickness of the bonding line was in inverse proportion to the penetration depth in the case of the PUR adhesive.

• 한국음향학회지
• /
• 제42권6호
• /
• pp.572-583
• /
• 2023

전 세계적으로 탄소중립 2050 실현을 위한 목조 건축물 수요가 늘어나고 있으며, 국내에서도 구조용 직교 집성판(Cross Laminated Timber, CLT)을 이용한 목조 고층 건축물에 대한 기술적 검토가 이루어지고 있다. 본 논문에서는 CLT의 기초 음향성능을 검토하기 위해, 국내산 낙엽송과 소나무로 CLT 슬래브(두께 150 mm)를 제작해 바닥 충격음 차단 성능과 음향투과손실을 측정했다. 실험은 상하로 연결된 페어 잔향실에서 수행했으며, CLT 슬래브에 콘크리트 토핑(두께 50 mm ~ 210 mm, 6조건)을 추가해 차음성능 개선량을 정량적으로 평가했다. 수종에 따른 바닥충격음 차단 성능의 단일수치 평가량을 비교하면, 낙엽송 CLT가 소나무 CLT보다 중량 바닥충격음에서 3 dB, 경량 바닥충격음에서 1 dB 낮았으나, 상부에 콘크리트 토핑을 추가한 조건에서는 수종 간 차이가 없었다. 상부의 콘크리트 층 두께 상승에 따라 중량 바닥충격음이 9 dB ~ 20 dB, 경량충격음이 20 dB ~ 30 dB 저감했다. 이 관계를 면밀도로 분석한 결과, CLT 슬래브의 바닥충격음 차단 성능은 면밀도와 높은 상관관계(R² = 0.94 ~ 0.99)가 있는 것을 확인했다. CLT 슬래브의 음향투과손실은 수종에 따른 차이가 없었다. 면밀도와 주파수로 산출한 음향투과손실 이론치와 실측치의 주파수 특성은 유사하지만 실측치가 8 dB ~ 12 dB 낮아, 보정치를 이용해 실험 대상인 CLT 슬래브의 음향투과손실과 주파수 특성의 관계를 도출했다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.30-39
• /
• 2016

구조용 집성재 라멘 접합부에 일반적으로 사용되는 접합철물을 대신하여 단판과 Glass Fiber Reinforced Plastic (GFRP)를 복합시킨 GFRP 보강적층판과 삽입 접착형 GFRP rod를 접합물로 사용하여 낙엽송 집성재 문형라멘 구조의 수평가력 성능평가를 실시하였다. 실험결과 GFRP rod와 에폭시 접착제를 이용한 삽입 접착형 접합부는 기존의 접합철물을 이용한 실험체와 비교하여 항복내력, 종국내력, 초기강성이 각각 49%, 52%, 61% 낮게 측정되었다. 이러한 접합부는 GFRP rod와 집성재 간의 접착력이 중요한 내력 기구로 현장적용 시 문제가 발생할 수 있는 가능성이 크다고 판단된다. 반면, GFRP 보강적층판과 목재(Eucalyptus marginata)핀을 이용한 실험체는 집성재 슬릿 접합부의 단면적 손실이 큼에도 불구하고 항복내력, 종국내력, 초기강성, 소성률이 전부 3% 이내로 측정되었다. 게다가 사이클에 대한 강성변화율도 35%로 가장 낮게 측정되며 접합철물을 이용한 실험체와 거의 동등한 성능을 발휘한 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.809-820
• /
• 2016

The goal of this study was to predict lamina yield from logs of different diameter for production of cross laminated timber. Log characteristics of red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica), including diameter, length, volume, and defects were used for statistical and geometrical analyses, along with the lamina characteristics, including width, thickness, and defects. Based on the data obtained, the strong factors influencing the yield and grade of lamina from the two species were statistically evaluated. A geometrical approach was used for analysis of the yield from logs of given diameters. Statistical analysis showed that lamina yield was dependent on target lamina size but the grade of lamina was not related to any of the log characteristics. The suggested yield equations from the geometrical approach indicated an accuracy of less than 20% difference.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.85-93
• /
• 2010

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.685-695
• /
• 2020

The connection performance between cross-laminated timber (CLT) walls and support has the greatest effect on the horizontal shear strength. In this study, the horizontal shear performance of CLT walls with reinforced connection systems was evaluated. The reinforcements of metal bracket connections in the CLT connection system was made by attaching glass fiber-based reinforcement to the connection zone of a CLT core lamina. Three types of glass fiber-based reinforcement were used: glass fiber sheet (GS), glass fiber cloth (GT) and fiber cloth plastic (GTS). The horizontal shear strength of the fabricated wall specimens was compared and evaluated through monotonic and cyclic tests. The test results showed that the resistance performance of the reinforced CLT walls to a horizontal load based on a monotonic test did not improve significantly. The residual and yield strengths under the cyclic loading test were 38 and 18% higher, respectively, while the ductility ratio was 38% higher than that of the unreinforced CLT wall. The glass fiber-based reinforcement of the CLT connection showed the possibility of improving the horizontal shear strength performance under a cyclic load, and presented the research direction for the application of real-scale CLT walls.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.233-236
• /
• 2008

구조재로서 목재는 자연에서 쉽게 얻을 수 있는 재료로서 뛰어난 미관, 가공성 등으로 인해 전통가옥이나 사찰 등에 널리 사용되어져 왔지만, 콘크리트나 강재에 비해 연소와 부식의 우려 등 내구성에 문제를 가지고 있다. 따라서, 목재를 구조부재로 활용하기 위해서는 타 재료와의 하이브리드화가 필요하다. 따라서, 본 연구에서는 구조용집성재보(100${\times}$200${\times}$3000(mm)), 콘크리트슬래브(800${\times}$100${\times}$3000(mm), fck=21MPa) 및 전단연결재(볼트, 래그스크류)로 구성된 합성보의 탄소성거동을 평가하기 위하여 구조 실험을 수행하였다. 실험결과, 전단연결재의 종류와 간격에 무관하게 항복비(항복내력/최대내력)가 크고, 항복 후에는 바로 취성파괴로 연계되었다. 따라서, 이러한 취성파괴를 방지할 수 있는 휨보강(철근, 섬유쉬트 등)이 필요할 것으로 판단된다. 또한, 전단연결재 배치간격이 좁을수록 합성효과가 우수하여 사용성이 뛰어나기 때문에 경제적 설계와 재료의 효율적 사용이 가능할 것으로 판단된다.