• Journal of Periodontal and Implant Science
• /
• 제46권5호
• /
• pp.350-359
• /
• 2016

Purpose: The purpose of the present study was to evaluate the effectiveness of a minimal concentration of bone morphogenetic protein-2 (BMP-2) in terms of quantitative and qualitative analyses of newly formed bone in a rabbit maxillary sinus model. Methods: In 7 rabbits, sinus windows were prepared bilaterally. Biphasic calcium phosphate (BCP) loaded with 0.05 mg/mL BMP-2 was grafted into one sinus (the BMP group) and saline-soaked BCP was placed into the other (the control group) in each animal. The animals were allowed an 8-week healing period before being sacrificed. Specimens including the augmented area and surrounding tissues were then removed and evaluated both radiographically and histologically. Results: There was a difference in the mineralization of new bone between the groups. In the BMP group, the greater part of the new bone consisted of mature lamellar bone with an evident trabecular pattern, whereas the control group showed mostly woven bone, consisting only partially of lamellar bone. Histometrically, the area of new bone was significantly greater ($4.55{\pm}1.35mm^2$ vs. $2.99{\pm}0.86mm^2$) in the BMP group than in the control group (P<0.05); however, the total augmentation volumes were not significantly different between the groups. Conclusions: Within the limitations of this study, it can be suggested that a minimal concentration of BMP-2 (0.05 mg/mL) had an osteoinductive effect with accelerated mineralization in a rabbit sinus model using a BCP carrier.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.362-365
• /
• 2011

In the present work, the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys have been investigated. Potentiodynamic polarization and immersion tests were carried out in 3.5% NaCl solution of pH 7.2 at room temperature to measure the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys. With increase of the Sn contents, the volume fraction of the $Mg_2Sn$ phase was increased. The corrosion rate of Mg-xSn alloys was increased up to 7 wt.%Sn and decreased above 9 wt.%Sn. Initiation of galvanic site during immersion mainly occurred at Mg/$Mg_2Sn$ interface and propagation went into ${\alpha}$-Mg. For this reason, corrosion properties of Mg-xSn (added from 1 wt.%Sn to 7 wt.%Sn alloys) alloys are decreased because the galvanic site was increased with increasing Sn addition. In Mg-9wt.%Sn alloy, however, the corrosion site were changed from Mg/$Mg_2Sn$ interface to ${\alpha}$-Mg/$M_2Sng$ interface in lamellar structure. Preferentially corrosion of ${\alpha}$-Mg/$M_2Sn$ interface in lamellar structure impeded corrosion propagation went into ${\alpha}$-Mg.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.9-15
• /
• 2008

Au와 Sn을 순차적으로 도금한 Au/Sn 범프를 플립칩 본딩하여 Au-Sn 솔더 접속부를 형성 후, 미세구조와 접속저항을 분석하였다. $285^{\circ}C$에서 30초간 플립칩 본딩한 Au-Sn 솔더 접속부는 $Au_5Sn$+AuSn lamellar 구조로 이루어져 있으며, 이 시편을 $310^{\circ}C$에서 3분간 유지하여 2차 리플로우시 $Au_5Sn$+AuSn interlamellar spacing이 증가하였다. $285^{\circ}C$에서 30초간 플립칩 본딩한 Au-Sn 접속부는 15.6 $m{\Omega}$/bump의 평균 접속저항을 나타내었으며, 이 시편을 다시 $310^{\circ}C$에서 3분간 유지하여 2차 리플로우 한 Au-Sn 접속부는 15.0 $m{\Omega}$/bump의 평균 접속저항을 나타내었다.

• 복식
• /
• 제60권5호
• /
• pp.35-50
• /
• 2010

The purpose of this study was to know how helmet and armor was reinterpreted in historical play by considering general concept and type of old helmet and armor from the aspect of costume history and comparing the helmet and armor types of TV historical plays, Yeongaesomun and Taewangsasingi, whose historical backgrounds were based on the age of Goguryeo. The helmet and armor type shown in Yeongaesomun was reinterpreted as the one, which is close to historical investigation, by reappearing lamellar armor and jongjangpanju(helmet made of slim, long plate) shown in Goguryeo wall painting. The helmet and armor type shown in Taewangsasingi expresses fantastic helmet and armor by adding fantastic factor regardless of historical investigation. The study result reveals that there are several common characteristic factors between the helmet and armors of two historical plays. First, there was a classification in the display of character and story. The helmet and armor type shown in Yeongaesomun classified color and detail design depending on lamellar armor or character. In Taewangsasingi, the helmet and armor was manufactured depending on character's nature and the chain armors, which are lighter than existing helmet and armors, were usual. Second, they escaped from the historical investigation about traditional helmet and armor. In Yeongaesomun, myeonggwangae(a type of armor), which might be popular, was not expressed and Taewangsasingi is free from an imperative idea of historical investigation by manufacturing helmet and armor referring to that of ancient Rome age. The modern sense was reflected to increase dramatic effect. The helmet and armor of Yeongaesomun provides modern feeling by using stainless steel material and modern color arrangement and that of Taewangsasingi is designed in modern, splendid way as it aimed at game development from the planning step.

• Applied Microscopy
• /
• 제22권1호
• /
• pp.33-41
• /
• 1992

To clarify the exocytotic features in adrenal medullary aminergic cells, the authors observed rat adrenal medulla prepared by the TAGO method with transmission electron microscope. Rat adrenal medulla contains two types of aminergic cells, adrenergic and noradrenergic, as described. They were present as a group. In a single group both adrenergic and noradrenergic cells were present, but the same kind of cells showed the tendency forming small groups. Adrenergic cells were characterized with the granules having relatively electroluscent cores. These granules were relatively uniform in size, and the cores filled the granules with only thin halos. Noradrenergic cells were characterized with the granules of various size and forms. Most of the cores of these granules were generally more electron-dense than those of the adrenergic cells and only partly filled the granules without forming the halos. But, some granules were very similar in the shape and electron density as those of the adrenergic cells. Even empty-looking granules were present. Exocytotic figures with the classical omega figures were observed in both types of aminergic cells, but they were more frequent in adrenergic cells. These figures were mainly present along the plasma membranes toward the capillary. The excreted materials could be identified in the cleft of the omega figures. Apocrine-like secretory patterns but without cytoplasmic rims were identified in noradrenergic cells. Some vesicles, possibly formed from the cytoplsmic tubular systems were released. Some irregular lamellar structures of varying sizes were also observed. They looked like membranous structures sneaking through the plasma membranes. We could not, however, found any evidences of their involvement in exocytotic processes. These were present toward the capillaries and found only in the adrenergic cells. The authors conclude that the secretory processes in adrenal chromaffin cells may include not only the classical exocytotic processes but also the unusual direct secretions of granules or parts of cellular organelles. The membranous lamellar structures may indicate the remnants of excreted granules or functionally inactive excess membranes of the organelles removed from the cytoplasm.

• 폴리머
• /
• 제27권6호
• /
• pp.509-520
• /
• 2003

입체규칙성이 다른 폴리프로필렌 (PP)의 결정화 거동을 비교하였다. 결정화 조건은 신디오택틱 폴리프로필렌 (sPP)과 아이소택틱 폴리프로필렌 (iPP)의 단위 결정 격자, 라멜라 구조, 구정의 성장에 영향을 주었다. 냉각속도가 증가할수록 결정 구조의 안정성이 감소하였으며, 냉각속도에 따른 구조적 변화는 iPP 가 sPP보다 크게 나타났다. sPP는 1 $^{\circ}C$/min 이하의 속도로 서냉될 때 body centered cell H의 fully antichiral packing 구조를 형성하였고 sPP가 primitive cellII구조를 형성할 때, 결정 격자와 라멜라 구조는 열이력의 영향을 작게 받은 것으로 확인되었다. 최대 결정화 온도에서 결정화 속도는 iPP가 sPP보다 빠르게 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.11-11
• /
• 2010

In order to design for nano structured materials with enhanced thermoelectric properties, the alloys in the pseudo-binary $Bi_2Te_3$-PbTe system were investigated for their micro structure and thermal properties. For this synthesis the liquid alloys were cooled by water quenching method. The micro structure images were taken by using electron probe micro analyzer (EPMA). Dendritic and lamellar structures were clearly observed with the variation in the composition ratio between $Bi_2Te_3$ and PbTe. It was confirmed that a metastable compounds is $PbBi_2Te_4$ in the The $Bi_2Te_3$-PbTe system. The change in the composition increasing $Bi_2Te_3$ ratio causes to change structure from dendritic to lamellar. Seebeck coefficient of alloys 5 which the mixture rate of $Bi_2Te_3$ is 83% was measured as the highest value. In contrast, the others decreased by increasing $Bi_2Te_3$. n-type characteristics was observed at all condition except alloy 6 which $Bi_2Te_3$ ration is 91%. The power factors of all samples were calculated with Seebeck coefficient and resistivity. Also the thermal conductivity was measured by using laser flash analyzer (LFA). In this work, the microstructures and thermal properties have been measured as a function of ratio of $Bi_2Te_3$ in the $Bi_2Te_3$-PbTe system.

• 한국주조공학회지
• /
• 제31권5호
• /
• pp.284-287
• /
• 2011

본 연구는 Mg-Al 합금에 첨가된 희토류 금속(rare earth metal, RE)과 스트론튬(Sr)이 상온 및 고온 기계적 특성에 미치는 영향을 비교하고, 그 결과를 미세조직의 변화와 연관지어 분석하는 것이 목적이다. 이를 위해 4종의 Mg-6%Al-(3-X)%REX% Sr 합금(X = 0~3)을 마련하여 RE를 Sr으로 대체하면서 상온 및 고온 인장 특성, 크립 저항성을 평가하였다. RE가 Sr으로 대체됨에 따라, 층상구조의(${\alpha}$ + $Al_4Sr$)상이 ${\alpha}$ 덴드라이트 사이에 생성되면서 침상의 $Al_4RE$상이 점차 소멸하였으며 Mg-6%Al-3%Sr 합금에서는(${\alpha}$ + $Al_4Sr$과 블록형태의 Mg-Al-Sr상이 관찰되었다. Sr 함량이 증가할수록 항복강도와 크립저항성은 지속적으로 향상되는 경향을 나타내었다.

• Journal of Periodontal and Implant Science
• /
• 제28권2호
• /
• pp.263-273
• /
• 1998

For histologic observation of the regenerated bone following guided tissue regeneration (GTR) using ePTFE membranes with calcium carbonate implant and autogenous bone graft, biopsies were collected from 2 patients during 5-year-postoperative surgical reentry. In both combined cases with guided tissue regeneration in conjunction with calcium carbonate implant and autogenous bone graft, significant bone fill and gain in probing attachment level was observed. In histologic examination, specimen in GTR case with calcium carbonate grafting was composed of a dense bone containing vascular channel with lamellar structure and viable bone cells in lacunae, however considerable calcium carbonate particles remained unresorbed and isolated from regenerated bone by the dense cellular and fibrous connective tissue. No formative cells could be seen in contact with remained calcium carbonate particles. In GTR case with autogenous bone grafting, specimen show was composed of a dense lamellar bone containing vascular channel, which showed normal alveolar bone architectures. The present observation indicate that guided tissue regeneration in conjunction with grafting, especially autogenous bone graft, has highly osteogenic potential, however resorbable calcium carbonate granules were not completely resorbed at 5 year postimplantation.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.330-342
• /
• 2003

The formation of emulsions and micelles in water/ceramide PC104/CholE $O_{20}$/C$_{16}$E $O_{20}$ and water/ceramide PC104/CholE $O_{20}$ mixtures was investigated through the phase behavior studies. The phase diagrams showed the existence of micelle and emulsion regions in both systems. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) showed the wider micellar and emulsion regions than the single surfactant system (CholE $O_{20}$). From FT-IR measurements, it was found that the polyoxyethylene (POE) groups of surfactants formed the hydrogen bonds with amido carbonyl group in ceramide PC104. This result indicated that the hydrophilic part (EO) of surfactants could stabilize the lamellar structure and emulsion of ceramide PC104. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) resulted in the smaller emulsion droplet size due to the effect of curvature at the interface, thus further increasing emulsion stability. With the penetration of $C_{16}$E $O_{20}$into the interfacial layer of surfactants in emulsion, the curvature of the interface might be altered for the formation of smaller emulsion droplets. The mixed surfactant system could incorporate up to 4 wt. % of ceramide PC104 into emulsion more than single surfactant system.ystem.m.