• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.337-343
• /
• 2020

This study was carried out to evaluate the yield of cuttings according to the planting and runner releasing times of mother plants in order to raise the cutting seedlings of raising seedling period 75 days or more needed for forcing culture of strawberries to be transplanted into the field around the 15^th of September. Three domestic cultivars of 'Maehyang', 'Jukhyang', and 'Kuemsil' were tested. For experiment 1 to determine the yield of cuttings with the change of transplanting time, the mother plant were planted on February 28, March 20, and April 9 in 20 days intervals, and the cuttings were collected two to three times from June 4 to July 1. Experiment 2 was conducted to investigate the yield of cuttings depending on the runner releasing time, the runners were released in three intervals of 20 days, 40 days, and 60 days after planting the mother plant on March 5, and the cutting were collected once to three times from May 29 to June 26. From the comparisons of cutting yield according to the transplanting time of mother plants, February 28 treatment was more 9~25% and 114~165% for each cultivar than March 20 and April 9, respectively (Experiment 1). The yield of cuttings with releasing time 20 days after planting the mother plants had higher by 60~77% and 104~176% for each cultivar than 40 days and 60 days, respectively (Experiment 2). From these results, in case of propagating the seedlings from cuttings needed for field planting around September 15, early planting around in the latter part of February is the best for cuttings yield. In addition, releasing after the removal of the runners produced from mother plants by 20 days after planting gives an advantage over higher yield of cuttings. Consequently, this study suggest to apply an efficient raising seedling system for labor saving and quality improvement in raising seedlings of three strawberry cultivars in Korea.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.23-28
• /
• 2015

This study was performed to investigate the adequate standard pot and number of plants per tree of raising seeding pot on the foxtail millet transplanting culture in the southern province. Due to the various application of wellbeing-health food recently, for upbringing of the foxtail millet, millet and sorghum in minor cereals, R & D and policy support is being promoted actively. The foxtail millet growing season is so short from 90 to 130 days, and it is large variations for a growth temperature. The main results are as follows. When it comes to foxtail millet transplantation, seedling quality of 406 holes, 200 holes and 162 holes of raising seeding pot type were not all significant, and field rooting percentage is accounted for all 94 to 95%. Yield of a foxtail millet was exposed in 406holes 305 kg/10a>162holes 303 kg> 200holes 302 kg order, and it was no significance between test processing. When it's the raising seeding transplanting culture, in case of pot culture, 406holes pot culture were reduced the bed soil cost 63%, pot 50%, working hours 18% for 200holes pot. Transplanting seedling quality per a foxtail millet transplanting culture method, dry weight was high inclination as transplanting number of plant is less, and field rooting percentage displayed more than all 95%. Yield appeared to 2 plants seedling transplanting 315kg/10a> 3 plants seedling transplanting 304kg>1 plant seedling transplanting 256kg order. The projected cost per the pot-sort on the raising seeding transplanting culture of foxtail millet, the seedling transplanting culture of 406holes was reduced 40% percentages compared to 200holes as 76,230won/10a. As a result, 406holes pot and 2plants seedling transplanting culture, labor-saving culture was possible.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.212-218
• /
• 2011

This study was performed to determine the relative quality of mungbeans harvested in bulk after applying a labor-saving cultivation (LSC) method, compared to mungbeans harvested three different times under the conventional cultivation condition. There was no significant difference in starch, crude protein, and vitexin or isovitexin content of seed according to the cropping system or harvest time. The mungbeans grown under the LSC method had the highest crude fat content, followed by mungbeans from the third-, the second- and the first-harvest mungbeans under the conventional cultivation. No significant difference was found in the composite ratio of saturated fatty acids to unsaturated fatty acids according to cropping system or harvest time. The second-harvest mungbeans grown under the conventional cultivation condition had 17 different types of fatty acids, while the third-harvest mungbeans grown under the conventional cultivation and those grown under the LSC condition had the fewest types of fatty acids with 12. Of the major saturated fatty acids, palmitic acid and arachidonic acid had the highest composite ratio in the first conventional cultivation followed by the second, the third and the LSC. However, stearic acid showed the opposite tendency. Of the major unsaturated fatty acids, linoleic acid had the highest composite ratio in the first conventional cultivation, followed by the second and third conventional cultivation and the LSC. Amylogram characteristics of the mungbeans were significantly different according to cropping system and harvest times. The mungbeans harvested after the first conventional cultivation had significantly higher pasting temperature, peak viscosity, holding strength viscosity, final viscosity and breakdown, while mungbeans harvested after the third conventional cultivation had significantly higher setback viscosity. In contrast, the mungbeans harvested under the LSC methods had a significantly lower amylogram value. When harvest rate, color values and amino acid content of sprout were measured, mungbeans grown under the LSC conditions had a low harvest rate of sprout, but had Hunter's color values and amino acid content of sprout similar to those of mungbeans grown under the conventional cultivation condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.3-12
• /
• 1992

Forage grasses and legumes ar$\varepsilon$ the mam component of livestock diets in Canada. There are over 30 million ha of grassland in Canada and there is a large, undeveloped land base in fringe areas suitable for forage production. The short growing s season limits the grassland farming to the southern p parts of Canada. The win!er season is long and in most parts of Canada cold temperatures, fr$\varepsilon$ezmg, and thawing, and diseases exert sever$\varepsilon$ stress on overwintering forage plants. The development of persistent cultivars is essential for sustained production particularly in the fringe areas with short growmg s$\varepsilon$ason. The seasonality of dry matter production is a result of high growth rates in early summ$\varepsilon$r and low dry matter accumulation in late summer and fall. Innovative management practIces a and cultivars with improved regrowth capacity are n necessary to overcome such skewed production pattern and to extend effiectlVe grazmg season l Improved pasture production is an important part of reducing costs in livestock operations and remaining competitive. It is suggested that applying available technology would increase pasture productivity and reduce d$\varepsilon$pendence on stored feeds thus improving profitability of small producers in particeular. Reducing nutrient losses during harv$\varepsilon$stmg, s storage, and feeding is essential for improved production efficiency during confinement. The devclopment of low cost and labor saving methods of ensiling is critical for improved efficiency and profitability of forage based enterprises Livestock industries must respond to consumer preferences for low fat and cholesterol foods. Research and development of entire production systems is emphasized for dev$\varepsilon$loping viabl$\varepsilon$ enterprises. It is increasingly difficult to secure resources for r$\varepsilon$search, education, and extension, and alliane$\varepsilon$s and cooperation must expand among organizations with interests in forage based livestock systems.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.95-101
• /
• 1997

This study was conducted to investigate how a labor saving for conventional hand sowing and respond to major agronomic traits under different planting density in 1993 and 1994. Each trial was a randomized block split plot with row spacing as the main plots and hill spacing as subplots. Sowing rate appeared lower in 20 or 25cm hill spacing using machine seeder than in hand sowing. Sowing time required reduced more 121 hours per hectare in 60cm row, 20cm hill spacings using machine seeder than in hand sowing. Increasing row and hill spacings reduced number of seedling stand per unit $area(m^2)$. Both number of pods per plant and grain weight per plant and showed highly increase in wide planting. Best yield obtained in 60cm row, 20cm hill spacing using machine seeder. Accumulative mean air temperature was positively correlated with stem height, number of pods per plant and yield, otherwise accumulative rainfall was negatively correlated with ones. A highly significant negative correlation was showed between number of seedling stand per unit $area(m^2)$ and number of branches, number of pods per plant, grain weight per plant and yield. Yield was positively correlated with number of branches, number of pods per plant and grain weight per plant.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.15-20
• /
• 1977

This experiment was to investigate and analyse the effect of fertilizer at different level of treatment where the ordinary chemical fertilizers (Urea, TSP, muriate of potash) and the same amount of nutrients contained solid fertilizer respectively applied. 1. Ordinary chemical fertilizer known as quick releasing fertilizer showed its main effect in the first and second years but the effect was declined in the third year wheras slow releasing solid fertilizer showed no effect in the first year but gradually appeared in second year was reached at peak in the third year and effect continued till the forth year. 2. Both treatments, ordinary chemical fertilizer and solid fertilizer, showed fertilizer effect however ordinary chemical fertilizer treatment had 6.2 per cent of fertilizer loss over the solid fertilizer treatment. 3. Optimum fertilizer dose per tree seems to be 40-80 grams and fertilizer effect was continued for three years after the treatment. Fertilizer response in the first year only appeared on leaves with dark in color and its response on growth was observed in second year where ordinary chemical fertilizer applied and solid fertilizer treatment showed in third year. 4. For the above results, it may be desirable that optimum amount of ordinary chemical fertilizer should be applied once every other or every two years and solid fertilizer should be applied once every two years or every three years. 5. Solid fertilizer does not occure fertilizer damage when it was applied in excess and has labor saving advantage. 6. It is highly recommendable to produce solid fertilizer for the forest use in view of improving forest soil fertility and increasing forest resources in Korea.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.273-281
• /
• 2018

Wet hill seeding (WHS) is one of the more famous labor and money saving methods technology used for rice cultivation. In WHS, rice standing percentage and weedy rice occurrence are the most important factors considered to secure a rice yield. We investigated the optimum seeding date of WHS in the Southern Plain area of South Korea. Weedy rice needed two weeks at $15^{\circ}C$ to show over 80% emergence. Germinated rice seed grown at $20^{\circ}C$ needed over for 10 days to achieve a shoot length over 3 cm. In field cultivation, the mean temperature for ten days after seeding showed a highly positive correlation with rice standing rate, spikelet number per square meter and yield index that favorably compared to machine transplanting. With these data, we suggest that the optimum seeding date of WHS that can secure over 98% of yield index of machine transplanting in Southern part of Korea is May. 21~Jun. 5 in Honam and May. 16~Jun. 5 in Yeongnam area.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.249-255
• /
• 2023

Korean melon (Cucumis melo L.) is grown mostly in Northeast Asia area, and as a fruit mainly produced in Korea, the yield per unit area continues to improve, but the cultivation method is limited to soil cultivation, so it is necessary to develop hydroponic cultivation technology for scale and labor-saving is needed. As the ratio of NO₃^- increased, the plant height, the leaf length, the leaf width, and the internode length became longer and larger. On the other hand, the SPAD value decreased. The lower the ratio of NO₃^-, the faster the female flower bloom, and there was no difference in fruit maturity between treatments. There was no difference in the shape of fruit according to the ratio of NO₃^-, and the hardness was higher as the ratio of NO₃^- was lower. The total yield from March to July was KM3 5,650 kg/10a and KM1 4,439 kg/10a, 27% higher in KM3 and, in particular, 36% higher in quantity from March to May, when Korean melon prices were high season. Therefore, it was judged that it would be appropriate to supply NO₃^- suitable for hydroponic cultivation of Korean melon, which was formalized in December and produced from spring, at the level of 6.5 to 10 me·L^-1.