• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.11-18
• /
• 2013

PURPOSES : This study presents the noise level and frequency characteristics investigated in the national highways with the consideration of various measuring conditions and/or methods. METHODS : The noise levels on the asphalt concrete pavement(ACP) and the jointed plain concrete pavement(JPCP) of the national highway were measured and analysed with respect to three variables, i.e., pavement type, surface condition, and measurement distance. The PASS-By method is utilized for the noise measurement and then using CPB spectrum analysis method with 1/3 octave bandwidth, the noise levels and frequency characteristics were calculated for two-second periods before and after the peak noise. RESULTS : Depending on the pavement type, the noise level was changed as the average noise levels are 73.3dB(A) and 78.3dB(A) for ACP and JPCP, respectively. With respect to the effect of surface condition, the average noise levels for crack H(high), M(medium), and L (low) sections are 77.4dB(A), 77.4dB(A), and 78.1dB(A), respectively. Regarding the measurement distance, 1.2meter difference in measuring location reduces 1.6dB(A) of noise level; the average noise levels at 5.3m and 7.5m from the centerline of outer lane are 72.8dB(A) and 71.2dB(A), respectively. It should be noted that the noise levels are slightly different as a function of vehicle speed and type. However, the overall trends for each case was similar. It was found that the domain frequency bands for ACP and JPCP were 400Hz~2000Hz and 500Hz~2000Hz, respectively. CONCLUSIONS : Based on the analysis with the measured noise date from national highway, it was concluded that the noise level and frequency band vary depending on the various conditions. It was also found that some variables significantly affect the noise level while others do not. With further systematic investigation, the comprehensive noise characteristics on the national highway can be achieved. Using such database, it is possible to develop the fundamental noise reduction technology.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2002

Korea is a small country with relatively large mountainous areas and has many difficulties from planning to completing one road. Maintaining a completed road presents even more difficulties. presently, in estimating design elements, the result varies according to the engineer and there are many cases that question the reliability of the results. Therefore, in this study, the alignment of highway was sampled using by the centerline path, the design elements of horizontal alignment were reduced by applying the Least Squares Method, and the accuracy was analyzed. By this method, IP, IA, R, $\Delta$R and A-parameter were also determined. By observing relatively long straight sections, the approximate values could be estimated, and particularly, the considerably accurate value of A-parameter was determined. This study, using the Least Squares Method, aims to contribute to the development of the alignment examination in frequent traffic accident regions.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.21-30
• /
• 2005

Traffic volume data have been used for the plan, the design, and the operation of highway. Since 1955, traffic survey has been nation- widely carried out at national highway and the regular survey in national highway has been conducted at the intersections of highways. However, it is critical issue to select the priority of the regular survey because it is almost impossible to conduct regular survey at all intersections of national highways. In this study, MCDM(Multiple Criteria Decision Making) using AHP(Analytic Hierarchy Process) was applied to decide the priority of the regular survey. The following standard variables for determining the priority was selected the highway plan variables[AADT, VKT, Peak Hourly Volume, Location of highway from Urban], the highway design variables[Volume(pcu), Directional Traffic Volume, Heavy Vehicle Rate], and the highway operation variables[Speed, Density, V/C]. The standard variables were quantified and normalized. Using the Eigen vector method, the weighted values of each hierarchy based on the pair-wise comparison values from the questionnaire survey were calculated. The selection of the priority of regular survey was dependent on the size of the product of the weighted values for each hierarchy and the normalized values for the standard variables. Finally, the priority of regular survey of the intersections of national highways was determined according to the order in the size of the product of two values.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.6
• /
• pp.153-164
• /
• 2009

The objective of this study is to provide systematic design of the Korea's highway advisory radio system in intelligent transport systems. Highway advisory radio services support safety driving and traffic information for travellers, and rapid response of the system for emergency status not only dissemination of traffic for traffic but also flood, heavy snowfall, falling rocks, closed-road, collapse, accident and so on. Therefore, highway advisory radio service contributes national highway safety management system to the voice of the nation of user-centered traffic information service.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.508-512
• /
• 2015

Carbon emission calculation guidelines provided by the Korean Ministry of Land, Infrastructure and Transportation (MOLIT) and existing environmental load assessment studies have suggested a method for estimating based on the volume determined after the design development. Therefore they are not being helpful in the decision making of the environmental economics of road facilities in the planning stage in which specific information on construction output volume is lacking. Based on literature analysis of existing studies and consultation from a group of construction environmental professionals, 12 types of property information considered to be related to environmental load were selected from an inventory of information that will be available in the road planning stage. In addition, multiple regression analysis was performed based on the environmental load computed through the life cycle assessment (LCA) of 40 national highway project cases of Korea to deduce five impact factors of environmental load in the road facilities planning stage.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.11-18
• /
• 2019

This study aims to identify the actual condition of local food stores that serve as a regional activation space within the highway rest area. It analyzes and examines user awareness, and presents desirable directions for the establishment of new local food stores and improvement of existing facilities. The research method was conducted as follows: the status of 226 rest areas were examined which were installed on national highways, location conditions and convenience facilities. Second, a physical survey was conducted on 116 local food stores(floor area, location) and a user awareness survey on 63 local food stores. The results of the analysis and review have been concluded as follows. First, it is necessary to consider the establishment of a local food store in order to promote the local community by using various cultural and environmental conditions in the highway rest area, and to secure a public space to promote exchanges with local residents and revitalize the local economy. Second, considering the continuous increase of highway users, location, and traffic conditions, diversification of convenience functions including local food stores should be considered even if it is a medium and small highway rest area. Third, the floor area of local food stores is generally planned within a range of $75m^2$ to $125m^2$, and its location should be integrated with the rest area as much as possible. Inevitably, when you need to construct separately at the exit or entrance, you need to consider a unique design that ensures accessibility and visibility.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.37-44
• /
• 2009

Currently the reasonability of threshold values for rutting and cracking does not clearly defined at the Pavement Rehabilitation Decision Tree on national highway PMS(Pavement Management System). The goal of this study is to provide the reasonable threshold values for the national highway asphalt concrete pavement rehabilitation. To achieve this goal, test section that represents typical asphalt concrete pavement of national highway was selected and pavement export were participated. Pavement condition survey has been conducted and pavement performance data at the selected roadway section were analyzed. From this study, reasonable threshold values of Pavement Rehabilitation Decision Tree were suggested based on the pavement expert's engineering judgement. In terms of crack repairs, the application of overlay after cutting is required to deteriorated area where existing crack ratio is over 35% and just overlay is required to where crack ratio is over 20%. On rutting, rut depth over 13mm is required to overlay after cutting and rut depth over 10mm is just needed to overlay.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.61-70
• /
• 2010

The purpose of this study is to analyze the accuracy of traffic volume forecast by comparing an estimated to real traffic volume. For this study, total 10 sections of national highways, which are planned in 1980s and 1990s, were selected and traffic analysis data for highway construction were collected. In addition, targeted 10 sections were categorized into network-related and -unrelated sections. In the analysis of inaccuracy between the estimated and real traffic, for network-related sections, appeared to have lower inaccuracy. As time goes on after traffic open, inaccuracy between the estimated and real traffic appeared to be lower. In various section lengths, the longer the section length, the higher the inaccuracy is. Using 3 years passed data after traffic open, national highway have lower inaccuracy than expressway. However, the traffic analysis according to traffic open time resulted in little change of the inaccuracy.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.277-287
• /
• 2012

The MFFn(Mass First Flush) was analyzed for various rainy events(monitoring data from 2008 to 2009) in Transportation area(Highway, National road, Trunk road). Estimated MFFn using SWMM was evaluated by comparison with observed MFFn. MFFn was estimated by varying n-value from 10% to 90% on the rainy events. The n-value increases, MFFn is closed to '1'. As time passed, the rainfall runoff was getting similar to ratio of pollutants accumulation. The result of a measure of the strength of the linear relationship between observed data and expected data under model was good ($R^2$=0.89). Pollutants runoff loads by volume showed Highway 26.6%, National road 44.8%, Trunk road 35.0% at the MFF20(20% by total runoff). A case of MFF30, pollutants runoff loads by volume showed Highway 40.2%, National road 54.3%, Trunk road 46.8%. According to the results, Initial precipitation basis were Highway MFF30, National road MFF20, Trunk road MFF30 when the Non-Point source control facilities set up.