• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.111-118
• /
• 2009

This study is to analyze the performance of SWH(Solar Water Heating) and GSHP(Ground Source Heat Pump) systems by evaluating their energy efficiency and LCC(Life Cycle Cost) as being applied to the OO hall as a selected building in the Army. The OO hall, used as bathrooms, dining rooms, accommodations and offices, has reinforced concrete structure system with three floors above the ground and one underground, and its total floor area is approximately 2,917$m^2$. Two energy simulations are conducted to predict the yearly cooling and heating energy of the selected building: One is for analysis of an air-conditioning energy consumption using the e-Quest program, and another is for two new-renewable energy facilities as a water heating source using the RETScreen. The installed capacity of two new-renewable energy facilities is determined according to the 5% level of total standard construction cost. As a briefly result, SWH system is more energy-effective than GSHP system. Considering the break-even point, it is expected that SWH can take only 3 years 11 months to pay for itself in savings while the investment of GSHP can be recovered in more than 16 years 6 months.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.497-505
• /
• 2017

TDF (Tire derived fuel) Fly ash is an industrial by-product when scraped tire was used a fuel source at the power plant. TDF Fly ash has been classified as domestic waste at the workplace so far and has not been appropriately utilized. We conducted a fundamental physical property test of asphalt mixture to investigate the possibility of using TDF Fly ash as a mineral filler of asphalt mixture for exploring new usage strategies. TDF Fly ash meets KS F 3501 asphalt mixture mineral filler criteria. And the optimal asphalt binder amount was determined to be 4.5% by Marshall design. Mineral filler content was determined at 3% and analyzed by comparing using mineral filler as stone powder. The basic physical property test of the asphalt mixture was evaluated to the provision indicated in "Production and Construction Guidelines for Asphalt Mixture" published by the Ministry of Land, Infrastructure and Transport. In the test, Marshall stability test, dynamic immersion test, tensile strength ratio test, wheel tracking test were carried out. As a result of the experiment, Marshall stability and dynamic stability satisfied the standards, and confirmed the stability and Dynamic immersion and tensile strength ratio test that TDF Fly ash is more effective for scaling and moisture resistance than stone dust. Therefore, in this research, it is expected that multilateral utilization of TDF Fly ash, and a positive effect can be also expected.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.83-91
• /
• 2018

Purpose - The purpose of this study is to explore the introduction and activation of smart training for the effective training of vocational ability development of companies in the 4th industrial revolution era, we analyze the present status of smart training introduction and related difficulties and propose concrete activation plan. Research design, data, and methodology - Through the online survey, we tried to confirm the recognition of corporate about smart training. Questionnaires include what are the benefits, expectations, and difficulties of smart training, etc. The survey was conducted from August 21, 2017 to September 4, 2017. A total of 69 companies participated in the questionnaire. The questionnaire results were analyzed through frequency analysis and contents analysis. Based on the results of the questionnaire, we found out the cause of inhibition of smart training activation and suggested activation strategies. Results - The main reason for the provision of smart training is the expectation of the training performance and the recognition that it is possible to provide training in a flexible manner. The effectiveness of smart training operation was evaluated as a high level of contribution to the development of creative training course and the capacity of training institute. As a result of checking factors that hinders the activation of smart training, the most important reason is that the time and cost burden of the training institutes is excessive. The lack of expertise in the design of smart training courses and the burden of employers and trainees. Conclusions - In order to activate smart training, it is necessary to find solutions to the obstacles at the internal or external level of training institutions. The internal barriers to the training organization are lack of internal competence for preparation and course management. In this regard, we need to consider providing consulting, best practices or guidance in the process of designing and operating smart training. On the other hand, as an external obstacle factor, it is necessary to provide incentives to participate in smart training. In addition, further research is needed on strategies that can lead to participation in smart training from the viewpoint of employers and learners.

• Journal of Distribution Science
• /
• v.15 no.12
• /
• pp.61-72
• /
• 2017

Purpose - Despite that the importance of small enterprises' performance in the community has been magnified, no study has been conducted yet on the performance based on consumers directly faced by small enterprises. Accordingly, this study aims to investigate the relationship between the life styles of consumers who use small enterprises' stores by type and the word of mouth(WOM) effects, which are concrete behaviors of consumers. Research design, data, and methodology - The VALS classification system was utilized to classify the types of life styles of consumers who use small enterprises' stores. The consumers were divided into a total of four types. This study was intended to investigate the effects of the types of consumers on the word of mouth(WOM) effects of consumers who use small enterprises' stores along with the effects of consumers' perception of economic situations on their word of mouth(WOM) effects after using small enterprises' stores. Results - The results of the study indicated that among the types of consumers who use small enterprises' stores, the group that pursues faith and the group that pursues knowledge had positive (+) effects on favorable word of mouth(WOM) effects. However, the group that pursues trends and the group that pursues action were shown to have no effect and positive or negative perceptions of economic situations were shown to have no effects of the word of mouth(WOM) effects of users of small enterprises' stores. Conclusions - In this study, as a measure to create small enterprises' performance, word of mouth(WOM) effects on small enterprises' stores according to consumers' consumption behaviors were examined focusing on consumers. Through the study results, the groups of consumers who use small enterprises' stores by type that provide favorable word of mouth(WOM) effects were derived. And This Study aims to investigate the relationship between the four type life styles of consumer who use small enterprises' stores and the word of mouth(WOM) effect. Accordingly This study is significant in that it derived a measure to create small enterprises' performance centering on consumers and that it presented a cornerstone for the establishment of small enterprises at the government level.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.153-167
• /
• 2018

Despite many criticisms that topographic survey data for the official land price appraising collected annually using field survey method might be inaccurate, there is only few concrete research on it. This paper investigated whether the topographic survey data collected by a local government using field survey method is consistent with the data analyzed using the digital elevation model to examine its accuracy. The accuracy analysis indicated that 324 out of 1537 lots of land have inconsistent results which means the ratio of inconsistency is 17.36%. Among 11 areas studied, five had the inconsistency ratio above 20% while the worst one had 38.71%. The inconsistency ratio is generally higher for the rough terrain with irregular slope and high altitude while it is relatively lower for the terrain with smooth landform. The analysis results imply that there are limitations in investigating the topology by field survey method. Therefore, the official land price appraising policy should set precise criterion and change over to highly accurate geographic information analysis method to effectively and accurately examine topology, given the fact that the topology of the Republic of Korea has complicated features with irregular slope and altitude.

• Clean Technology
• /
• v.17 no.2
• /
• pp.85-96
• /
• 2011

Self-healing materials are a class of smart materials that have the structurally incorporated ability to repair damage caused by mechanical usage over time. A material (polymers, ceramics, metals, etc.) that can intrinsically correct damage caused by normal usage could lower production costs of a number of different industrial processes through longer part lifetime, reduction of inefficiency over time caused by degradation, as well as prevent costs incurred by material failure. The recent announcement from Nissan on the commercial release of scratch healing paints for use on car bodies has gained public interest on such a wonderful property of materials. This article is a second part of healing materials dealing with inorganic engineering materials such as metals, ceramics, and concrete. The healing mechanisms developed for the inorganic materials are to be discussed with the future prospect.

• Korean journal of communication and information
• /
• v.26
• /
• pp.83-104
• /
• 2004

Most studies of Korean Newspaper in historical view have focused on the news writing form and editorial practice. Those studies have much rely on the memories of ex-journalist or the impression of scholars. So this study aims to give the concrete figures of news writing forms and editing practices in 1920-30's by investigating Kim Dong-Seong's activities as a journalist. He was a first journalist who studies journalism. He studied journalism during his stay in the Ohio State University as an english department student. After he came back to Seoul, he worked at the Dong-A Il Bo as an one of the first publish members. His activities as a journalist have much important meanings because of his varied works and careers. He also wrote a practical affair book for reporters which was the first book in Korea. As a result of research about Kim Dong-Seong's activities in 1920-30's, the feature of edit practice in 1920's had much emphasis not only on the headline but on the relation between type and print, and at the same time the combination of news or the change of typography was one of methods which make the editing more variety. News materials were collected varied news sources and legworks by reporter. These results show us that such a news reporting practice in 1920-30's is similar co the contemporary.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.5 s.27
• /
• pp.89-101
• /
• 2005

The early phase of construction projects, communication among the related participants has great influence on the further transaction of the projects. However, important decision making are made by the experience of the field managers in practice without the method for systematic analysis. For example, in building construction project, selection process for construction method has been executed by decision making of some architects dependent on their experience. As a result, there have been frequent construction method alterations during the construction process and delay of duration, addition of cost, etc have followed accordingly. The main reasons of such a mal-functional transaction are due to the absent of the reasonal procedure of decision making reflecting the characteristics of construction project. Therefore, there is a need for an supporting tool and production design for the selection of rational construction method. The objective of this study is to propose production design process and decision making model in relation to various influent factors at the early phase of construction projects. To achieve these objectives, this study 1)analyzes the prior theory about production design, 2)we have studied about selection process for optimal construction method through constraint analysis in structural works, 3)performs a case study to embody the problems of the production design, and 4)proposes a cooperative committee model for supporting production design by analyzing the results of case study and interviewing experts. It is anticipated that the effective tool of proposed model would be able to improve communication among the related participants and systematically accumulate data that might be used in similar construction projects.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.12-22
• /
• 2011

Design value engineering (VE) has been performed in many construction projects according to the changes in the construction for most of the VB function analysis that performed, are problems that focus on function analysis and generating ideas based on individual experience of VE team member than generating ideas and value improvement of systematic function analysis. This may be due to the quotation of previously performed function analysis data, general function analysis, and abstract function definitions that do not cite the concrete characteristics of each facility. Therefore, in this study, the proposed cases from the existing design VE workshops, the current conditions of the connection between functions and ideas and of the idea categorization by building part were studied to determine why functions and ideas are not connected, and to propose pertinent improvement directions. on a performance-based function categorization system by building part that can provide the logical connection between functions and ideas in the function definition/categorization and function arrangement phases in the function analysis phase, the most important phase in VE activities, was developed by reflecting the required performance and functions for each part of the facility.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.111-121
• /
• 2010

As the customer's interest for sidewalk block in the street or apartment complex is increasing, the materials of block which had been a concrete block exclusively are varied to clay paver, native rock and wood etc. Especially, the sales volume of clay paver which is environment-friendly and ergonomic is dramatically increasing every year with two digits growth rate, however, many problems like "Edge Cracking" "Freezing Breakage" "Bending Breakage" "Joint Gap" are happening frequently within a couple of hours after installation due to the durabilities. Because of the characteristics of Ceramic products, clay pavers are very easy to be broken when they are bumped against each other. In addition, they are relatively fragile by a freezing expansion breakage when exposed to water due to hydrophilic property as well as the intensity and absorptance of the products are varied with small difference from the production process such as production equipment and process control. Therefore, it costs a lot of money to repair the breakdown unless production and installation is carried out according to the strict criteria of the quality control. In this study, the symptoms of breakdown frequently happened in clay paver are classified by each type and finally the solution for this problem in the production of brick, installation and criteria of quality control through compressive strength and absorptance test is suggested.