• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.617-625
• /
• 2019

Purpose: The fields manuals which is managed by the each disaster types are the integrated guideline. When the disaster occurred, all kinds of SOPs which are described in the manual does not need. Therefore, the person in charge is confused which SOP is executed. In this study, we propose the disaster response process model based on the specific disaster situation case. Method: Firstly, we define the disaster situation cases which is mentioned in the field manual, and then, we develop the disaster response process model including indispensible SOPs for the specific disaster situation case. As a verification and feedback process, we apply the model to Safety Korea Exercise scenario. Result: We developed SOP model and disaster response process model reflecting the concept of the disaster situation case. Conclusion: Safety Kore Exercise scenario reflecting the developed model may continuously upgrade the field manual.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.220-234
• /
• 2016

Sprayable waterproofing membrane has been considered as a substitute for a sheet waterproofing membrane in a variety of underground excavation works. However, fundamental properties of sprayble waterproofing membrane have not been fully given yet. In this study, a new two-component sprayable waterproofing membrane prototype was developed. In addition, its physico-mechanical properties were measured and compared with those of two kinds of thin spray-on liners where constitutive materials and construction methods are very close to each other. From direct tensile tests, the sprayable waterproofing membrane with elongations at break between 250% and 300% showed much higher ductility than TSLs. However, the sprayable waterproofing membrane had a limitation as a support member since its bond strength and loading capacity was lower than those of TSLs. From three-dimensional X-ray CT images, the porosity of the sprayable waterproofing membrane was estimated to be 26.13%. However, most of pores which might have been generated during membrane curing were not observed to be interconnected but isolated.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.29-41
• /
• 2010

Due to the recent technological advance, new types of AS/RS which can handle containers are being developed, and it is expected that they will be applied to related industries before long. Some companies and institutes in our country have constructed pilot systems for high-density-high-stacking systems and tested them to develop AS/RS-typed warehouses for containers. Along with this kind of construction efforts, development of rules to operate such systems efficiently and safely is also important. When outward-bound shipment is scheduled in container port, re-marshalling which rearranges containers in the yard to make shipment easy is conducted. In this paper, operating rules for the re-marshalling as well as simulation experiments to evaluate the performance of the rules are presented. We suggested two kinds of alternative sets of operating rules for re-marshalling and described the relevant logics corresponding to all possible cases for each alternative of operating rules. Through various simulation experiments, we found that each alternative has the merits and demerits at the same time and we could not say the one is always superior to the other. As a useful strategy, changing the applying operating rule is recommended from moment to moment depending on the expected number of operations at the landside input/output position.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2015

The purpose of this study is to develope BIM Template according to major building material for efficiently and quantitatively evaluating greenhouse gas emission at the design stage. Template users consider various environmental impacts without connecting simulation tools for analyzing environmental impact and Template users who have no prior knowledge can Life Cycle Assessment by using The green template. For this study, Database which was reflected in template was constructed considering environmental performance. and 6 kinds of environmental impact categories and PPS standard construction codes were analyzed by major building material derived from literature. Based on this analyzed data, The major Material Family according to the main building material was developed. When users conduct modeling by utilizing Family established, evaluating result can be confirmed in the Revit BIM Modeling program by using the schedule function of the Revit. Users through the modeling, the decision-making environment performance possible. In addition, we propose to create a guideline for the steps required to build an additional established family.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.1
• /
• pp.125-147
• /
• 2011

Recently, with a high demand for the construction and remodeling of libraries, and the rapid increase in the number of libraries during the last two years, the concern and need for library goods is also increasing sharply. The purpose of this study is to develop a new classification scheme of library goods by clarifying the terminology which could provide an accurate information on library goods and allow for their smooth circulation. In this study, library goods are defined as all kinds of products required for effectively collecting, organizing and providing services with library materials, and classified into library equipments and library supplies. The term, library equipment is principally used for those things that do not wear out within a certain time period, such as furniture and machinery. Library supplies refer to those things that are expendable. As the terminology is clarified, the classification scheme can be further refined. Library equipment, for example, can be classified as furniture, library system solutions, and computers and multi-media tools. Library supplies can be classified into library organization and repair supplies, sign systems, and miscellaneous articles. Finally, six major categories which include 117 different items are presented.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.6
• /
• pp.124-131
• /
• 2017

Recently, drone is extending its range of usability. For example, the delivery, agriculture, industry, and entertainment area take advantage of drone mobilities. To control real drones, it needs huge amount of drone control training steps. However, it is risky; falling down, missing, destroying. The virtual drone system can avoid such risks. We reason that what kinds of technologies are required for building the virtual drone system. First, it needs that the virtual drone authoring tool that can assemble drones with the physical restriction in the virtual environment. We suggest that the drone assembly method that can fulfill physical restrictions in the virtual environment. Next, we introduce the virtual drone simulator that can simulate the assembled drone moves physically right in the virtual environment. The simulator produces a high quality rendering results more than 60 frames per second. In addition, we develop the physics engine based on SILS(Software in the loop simulation) framework to perform more realistic drone movement. Last, we suggest the virtual drone controller that can interact with real drone controllers which are commonly used to control real drones. Our virtual drone system earns 7.64/10.0 user satisfaction points on human test: the test is done by one hundred persons.

• Research in Community and Public Health Nursing
• /
• v.9 no.1
• /
• pp.143-162
• /
• 1998

This is a study for the construction of nursing care based upon the Korean attitude toward medicine. Factors which were investigated include the source of nursing care, the reason for choosing care, the type of heath care chosen, the accessability of caregivers, and the desired location of death. The population examined in this study consisted of 517 adults distributed in six large cities and 191 adults from five rural communities. Data was analyzed using frequency, percent, Cronbach alpha, $X^2$ - test, t - test, F - test and scheffe post hoc contrast with an SAS program. The results of this study are summarized as follows: 1. Among sources of nursing care used, first rank rated-pharmacy(54.4), private hospital(18.2), general hospital(8.4), folk remedies in house (5.0), chinese hospital(2.8), prayer(2.8) and others(8.4), and the reasons for choosing nursing care rated 'the easiest method' (63.6), 'the best method'(15.7), 'reliable'(10.8) and 'lower cost burden'(4.6) in order of preference. 2. The type of nursing care chosen rated western medicine(6.80), chinese medicine(6.15), folk remedies(5.46), faith remedies(3.51) and divination remedies (1.41). There were significant differences in the effect recognition degree to various kinds of medicine. 3. The difference of the type of nursing care chosen according to general characteristics showed that urban residents were higher than rural community residents(t=2.15, p=0.0320) in western medicine, and urban residents, women, and singles were higher than rural community residents(t=2.04, p=0.0414), men (t= -2.89, p=0.0039), and married(t=2.50, p= 0.0126) on folk remedies. With repect to age and education those 21-30, under 20 and 31-40, graduated from college and graduate school were higher than above 51, above 61 (F = 7.76, p = 0.0001), graduated from elementary school(F=4.39, p=0.0006) on folk remedies. In other categories, rural community residents, women, younger people. Christians were higher than urban residents ( t = -2.73, p=0.0305), men(t= -4.15, p=0.0001), older people (F=2.48, p=0.0307), Catholic, Buddhist, or atheist (F= 70.18, p=0.0001) on faith remedies. Those graduated from high school and Buddhist were higher than unschooled, graduated from middle school(F=3.18, p= 0.0075), atheist, Catholic or Christian(F=18.32, p=0.0001) on divination redemies. There were significant differences concerning age and education level. 4. The accessibility of caregivers rated 'caregivers should be nearby if the patients need them' (50.0), 'caregivers must be there all day (24 hours)' (39.6), 'caregivers must be there at night only'(5.0), 'caregivers must be there during the day only'(2.6), 'caregivers always should visit during visiting hours' 0.4), 'caregivers don't need to be there at all' (1.2). The frist rank of suitable caregivers were rated as spouse(66.6), mother(24.2), daughter (3.6), daughter-in-law(1.9), and the reasons of thinking thus were rated as 'the most comfortable' (81.5), 'people should correctly with regards to family they'(7.1), 'the easiest' (5.4), 'take good care of the patient' (5.1) and 'lower cost burden' (0.4). 5. The desired location of death rated as the following: his/her house (91. 6) to the hospital(8. 4). A person going to encounter death in the hospital wanted his house(78.5) over the hospital(21.5), and a person dieing in the hospital prefered his house(52.9) over the hospital(47.1) as a funeral ceremony place. The following suggestions are made based on the above results. 1. A sampling method that enhances the re presentativeness should be used in regional and/or national related research and replicated to confirm the result of this study. 2. This study should be used to understand the Korean view of medical centers and to meet the expectations of patients in Korean nursing. 3. Research on the Korean traditional view of humans and expectations of the sick, health and illness, and health behavior, the perception of dying, the decision to heal, and the view of general medicine should continue to be conducted continuosly so that Korean nursing theory can be advanced on these concepts.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.165-171
• /
• 2013

Genomic relationship matrix (GRM) was constructed using whole genome SNP markers of swine and genomic breeding value was estimated by substitution of the numerator relationship matrix (NRM) based on pedigree information to GRM. Genotypes of 40,706 SNP markers from 448 pure Landrace pigs were used in this study and five kinds of GRM construction methods, G05, GMF, GOF, $GOF^*$ and GN, were compared with each other and with NRM. Coefficients of GOF considering each of observed allele frequencies showed the lowest deviation with coefficients of NRM and as coefficients of GMF considering the average minor allele frequency showed huge deviation from coefficients of NRM, movement of mean was expected by methods of allele frequency consideration. All GRM construction methods, except for $GOF^*$, showed normally distributed Mendelian sampling. As the result of breeding value (BV) estimation for days to 90 kg (D90KG) and average back-fat thickness (ABF) using NRM and GRM, correlation between BV of NRM and GRM was the highest by GOF and as genetic variance was overestimated by $GOF^*$, it was confirmed that scale of GRM is closely related with estimation of genetic variance. With the same amount of phenotype information, accuracy of BV based on genomic information was higher than BV based on pedigree information and these symptoms were more obvious for ABF then D90KG. Genetic evaluation of animal using relationship matrix by genomic information could be useful when there is lack of phenotype or relationship and prediction of BV for young animals without phenotype.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.26-37
• /
• 2015

This paper aims to review all landscaping elements of Donggwoldo by building and identify the palatial garden landscaping characteristics and landscaping methods in a bid to explore landscaping methods applicable for modern-time gardens of Korea through Succession of Tradition. The research methodology was adopted by which the palatial gardens appearing in Donggwoldo were observed according to garden elements to identify their characteristics. Garden elements in Donggwoldo include oddly shaped stones, ponds, buildings and Madang, borders and areas, and trees. Their characteristics were analyzed, and as a result they are outlined as follows. Location : Buildings in Donggwoldo were located in the optimal areas within the Myungdang (the best location), with the building sites being created by transforming the natural topography positively according to the existing topography and uses. Tree planting : The construction of the buildings involved using the existing trees. There were no specific principle and method of planting trees, and no specific criteria for choosing the kind of tree. Symmetrical planting was adopted and its is considered embracing the viewpoint of making gardens based on the expression of Yin and Yang. Strongly symbolical kinds of trees were also adopted. Bangji : it takes a nearly circular shape in palatial gardens, and such shapes represent conceptual and abstract symbols. They were also frequently used as the place of public entertainment. Pavilions : they did not take a certain standard shape. They had diverse shapes, including a triangle, square, pentagon, hexagon, and octagon and cross. Oddly shaped stones : Oddly shapes stones and stone cases were deployed mainly near the bedroom and the crow prince's residence and in the rear garden. Hwagye : it appeared mainly in the back of the bedroom, the crown prince's residence, the princess's residence, and other women's quarters. Chwibyeong : it was installed for the purpose of drawing the natural energy like a natural inlet instead of being the nature-dividing wall. Korea's garden composition method was very different from the Western and Chinese method. Overall, Chosun palatial garden style was characterized by strict and Confucian features, while the garden construction method adopted the Taoism thought. Yet, the gardens had a carefree aspect.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.