• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.287-291
• /
• 1988

These studies were carried out to find out the polishing properties and cooking quality of the cut-polished barley. Naked barley, Youngsanbori which was produced in Chonnam province, Korea in 1981, was applied for this experiment. Polished barley was produced by the conventional method and cut-barley was manufactured by the method established by Wheat and Barley Research Institute. The yield of cut-polished barley was 68.2% and that of conventionally polished barley was 70.1 %. The ratio of length to width was 2.88 in cut-polished barley and that of conventionally polished barley was 1.36. And weight of 1,000 kernel was 9.5g in cut-polished barley and 18.5g in conventionally polished barley. Energy consumption was found to be 91.1kW/1,000kg in conventionally polished barley and 105kW/1,000kg in cut-polished barley. Whiteness, water uptake ratio and expanded volume of cooked barley were 45.5, 225.7 and 283% in conventionally polished barley and 49.5, 312.7 and 318% in cut-polished barley, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.489-494
• /
• 1993

The amount of maize being imported from other countries to meet the national demand are increasing every year. Regardless of the usage whether it is for silage or for human consumption, amount of seeds for farmers are ever being increased. In order to solve the problems arising from the seed import, a program for developing waxy hybrids with high quality was set up at the College of Agr., Chungnam National University. The main breeding targets for high quality waxy hybrids are focused on the pericarp thickness. In order to obtain basic information needed for developing hybrids with thin pericarp, six inbred lines all derived from open pollinated Korean waxy lines were diallel crossed. Results obtained indicate that waxy hybrids with thin pericarp can be developed by choosing proper parental lines. Of the six inbreds, Jewon inbred had utmost thin pericarp compared with other lines. Hybrids crossed with Jewon showed also thinner pericarp than other hybrids. However, Danyang which has thick pericarp showed thicker pericarp in hybrid combinations. Variance due to general combining abilities was greater than the variance due to the specific combining abilities, indicating that additive gene effects are more important. The pericarp thickness of waxy hybrid endosperm varied with the parts of pericarp. The germinal side of the pericarp is comparatively thinner than the abgerminal side. The upper part (crown) has thicker pericaip than lower part (tip) of the kernel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.140-145
• /
• 2011

In order to establish the application method of slurry composting & biofilteration liquid fertilizer (SCB LF) in rice cultivation, experiments were studied on split application method of it and effects of it on soil chemical properties and rice yields. Land leveling by rotary tillage within 2 days after application of SCB LF, $NH_4$-N concentration in soil was maintained uniformly in all paddy field. Initial concentrations of $NH_4$-N and $NO_3$-N in soil were high at standard fertilization and 100% application of SCB LF as basal fertilization, however, after tillering stage they maintained similar concentrations in all experimental plots. $NO_3$-N content in infiltration water was slightly lower at 70% application of SCB LF as basal fertilization and 30% application of SCB LF as fertilization at panicle initiation stage than at standard fertilization. Yields of rice by split application of SCB LF were lower at 100% application of SCB LF as basal fertilization, however, those of the other application of SCB LF were similar with that of standard fertilization. In case of rice quality, perfect kernel rates were high and protein contents were lower at non-application and 100% application of SCB LF. Rice quality of 70% application of SCB LF as basal fertilization and 30% application of SCB LF as fertilization at panicle initiation stage were similar with that of standard fertilization.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.551-556
• /
• 2015

Iksan370 is a long-spike wheat developed by the Rural Development Administration yielding excellent features components such as cold resistance, disease resistance, and viviparous germination. The physicochemical and material properties of the raw wheat and milled flour of Iksan370 were analyzed to derive its appropriate uses. The raw wheat of Iksan370 showed high contents of ash and proteins at 1.71% and 13.7%, respectively. Its test weight of 763.0 g/L was similar to those of other varieties and its 1,000 kernel weight was high at 45.38 g. The milled flour of Iksan370 had an ash content of 0.45%, which corresponds with a class 1 flour, and its protein content is 12.18%, corresponding with strong flour. The damaged starch was 5.41%, which was lower than that of other varieties. The average grain size was $70.67{\mu}m$ and the grain distribution was at the level of a typical hard wheat. In the farinogram, the water absorption was 58.63%, which corresponded to the level of medium flour. The development time was 7.00 minutes, which was significantly lower than those of Jokyung and Keumkang. The degree of softening was 67.00 BU, similar to those of Yunbaek and Baekjoong. Among the physico-chemical characteristics, the high protein content and typical hard wheat grain distribution of Iksan370 were similar to those of strong wheat, usually used for bread making. However, in the farinogram, the dough development time was short and the degree of softening was high. As a result, Iksan370 was expected to have poor breadmaking properties and a small volume of the final bread product due to insufficient dough durability. On the other hand, Iksan370 showed the highest maximum gelatinization viscosity at 864.00 BU. Therefore, Iksan370 is expected to show glutinous texture when used for noodles and its flour appears to be appropriate for frying powders as well.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.469-476
• /
• 1998

In the case of acquisition and displaying medical Images such as ultrasonography and endoscopy on VGA monitor of PC system, image degradation of tear-drop appears through scan conversion. In this study, we compare several methods which can solve this degradation and implement the hardware system that resolves this problem in real-time with PC. It is possible to represent high quality image display and real-time processing and acquisition with specific de-interlacing device and PCI bridge on our hardware system. Image quality is improved remarkably on our hardware system. It is implemented as PC-based system, so acquiring, saving images and describing text comment on those images and PACS networking can be easily implemented.metabolism. All images were spatially normalized to MNI standard PET template and smoothed with 16mm FWHM Gaussian kernel using SPM96. Mean count in cerebral region was normalized. The VOls for 34 cerebral regions were previously defined on the standard template and 17 different counts of mirrored regions to hemispheric midline were extracted from spatially normalized images. A three-layer feed-forward error back-propagation neural network classifier with 7 input nodes and 3 output nodes was used. The network was trained to interpret metabolic patterns and produce identical diagnoses with those of expert viewers. The performance of the neural network was optimized by testing with 5~40 nodes in hidden layer. Randomly selected 40 images from each group were used to train the network and the remainders were used to test the learned network. The optimized neural network gave a maximum agreement rate of 80.3% with expert viewers. It used 20 hidden nodes and was trained for 1508 epochs. Also, neural network gave agreement rates of 75~80% with 10 or 30 nodes in hidden layer. We conclude that artificial neural network performed as well as human experts and could be potentially useful as clinical decision support tool for the localization of epileptogenic zones.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.332-335
• /
• 2008

"Hwangkeumbora" is a new japonica rice cultivar developed from a three way cross of Jinbubyeo, Odaebyeo, Fukei126 at Honam Agricultural Reaserch Institute (HARI), NICS, RDA, in 2006. This cultivar has about 110 days growth duration from transplanting to harvesting under Korean climate condition. The milled kernel of "Hwangkeumbora" is translucent with non- glutinous endosperm. Amylose content of "Hwangkeumbora" is about 19.3%. "Hwangkeumbora" has better palatability of cooked rice compared with "Odaebyeo" and shows high resistant reaction to the blast, but susceptible to major diseases and insect pests. The milled rice yield of "Hwangkeumbora" is about 5.37 MT/ha under the standard fertilizer level of the ordinary transplanting cultivation. "Hwangkeumbora" would be adaptable for ordinary transplanting in northern plain, mid-mountainous, southern mountainous of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.58-62
• /
• 2008

A new vegetable peanut cultivar "Charmwon" (Arachis hypogaea ssp. fastigiata.L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang 2006. It was developed from the cross between the disease resistant cultivar "HYQ(CG)S-10" and the high-yielding cultivar "Sinkwang". "Charmwon" which has been classified as Shinpung plant type is less branch number with early flowering and ellipse-shaped large kernel. Each pod which showed very shallow constriction had two grains with red testa and 100 seed weight was 90g in the regional yield trials (RYT). This variety also showed higher free sugar and protein contents in seed quality, and had more resistant to early and late leaf spot diseases compared with check one. In the regional yield trials "Charmwon" was out-yielded than check variety by 18% with 8.93 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.152-160
• /
• 2005

This study was carried out to investigate selectable criteria in evaluating waxy corn $F_1$ hybrids for developing good eating quality waxy corn variety. The physicochemical property analysis of 6 waxy corn $F_1$ hybrids - Chalok1, Chalok2, Heugjeomchal, Yeonnongl, Chalok4, and Suwon45- showed a range of $11.2\~13.1\%$ for crude protein, $5.1\~6.0\%$ for crude fat, $91.8\~92.6\%$ for amylopectin, and $4.5\~6.6\%$ for free sugar content. The pericarp thickness which is one of the most important characteristics related to tenderness in waxy corn was ranged $34\~47{\mu}m$ in 4 waxy corn hybrids - Yeonnongl, Chalok4, Suwon45, and Heugjeomchal. On the other hand, it was ranged $64\~81{\mu}m$ in Chalok1 and Chalok2. The amylogram analysis by rapid visco analyzer showed that in fresh waxy corn hybrid (DAP25), all amylogram properties except setback were higher in Yeonnongl, Chalok4, and Suwon45 compared to those of Chalokl, Chnlok2, and Heugjeomchal. However, in matured waxy corn hybyids (DAP45), the result was the opposite - the amylogram properties were higher in Chalokl, Chalok2, and Heugjeomchal than those of Yeonnongl, Chalok4, and Suwon45. The texture analysis showed that gumminess, chewiness, and hardness increased dramatically with the time after the cooking in Chalokl and Beugjeomchal. On the other hand, these above pyoperties did not change as rapidly with the time in Yeonnongl, Chalok4, and Suwon45. Gumminess, chewiness, and hardness did not increase much within 6 hours after steamingr but increased significantly 32 hours after steaming. Therefore, we have reached a conclusion that texture analysis of cooked waxy corn should be carried out 6 hours after steaming. In the sensory evaluation, Yeonnongl, Chalok4, and Suwon45 revealed higher palatability -6.8, 7.1, and 6.9 respectively - than. that of Chnlokl, Chalok2, and Heugjeomchal. The palatability analysis of 6 waxy corn hybrids showed palatability positively correlating with free sugar content,100-kernel weight, kernel length, kernet width, and consistency, but negatively correlating with pericarp thickness, hardness, gumminess, and chewiness.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.226-231
• /
• 1994

This experiment was conducted to evaluate the effect of coated urea complex fertilizer(CUC) on the growth and quality of rice in high-ridged dry seeding and infant -seedling machine transplanting on clay loam and sandy loam in Milyang, Korea, 1993. The CUC level applicated was 100 %, 80 %, 60% and 40% to standard application amount of fertilizer. Results obtained were as follows : 1. The nitrogen releasing rate in dry seeding was 83% for sandy loam, 81% in clay loam for 3.5 months after initial releasing, and in infant-seedling was 89% in both soil types for 4 months. 2. The degree of rice leaf color was the highest at the heading stage, and was high with increasing CUC application level regardless of cultural methods, especially was higher at harvesting stage in the 100% level of CUC to standard application amount of fertilizer than conventional fertilizer. 3. The perfect rice grain ratio was higher in infant-seedling than in dry seeding, but lowered with increasing CUC application level regardless of cultural methods. The green kerneled rice ratio among imperfect rice grain was high in dry seeding, and the notched belly rice kernel ratio was high in infant-than infant-seedling of the both soil types, and increased with increasing CUC application level. 4. Hon-value in rice grain was higher at the treatment of CUC application than conventional fertilizer in dry seeding. However, it was contrary result in infant seedling, and was low tendency with decreasing CUC application. On the other hand, the protein in rice grain was also same tendency of Hon-value. Cel-consistency related to eating quality was longer with increasing CUC application level regardless of cultural methods. However, there was no clear tendency at clay loam. 5. No significant difference between rice yield and CUC application in the range of 60% to 100% at both soil types in dry seeding was observed. These results appeared in clay loam under infant seedling except sandy loam. Accordingly, it was thought that 60% level of CUC to standard application amount of fertilizer could be applicated for growth and quality of rice.